- En →
- Zapchasti Kompressorov →
- Kompressory Mycom →
- Katalog Zapchastey K Kompressoram Mycom M
Toros LLC is industrial cold of Europe
Spare parts, repair and maintenance of refrigeration units.
Spare parts for compressors in stock and on order!
call:
WhatsApp
e-mail: storopov86@gmail.com
Mycom M Compressor Spare Parts Catalog
| Item No. | Part name | Code No. | Qty. | Remarks | ||||||
| 2 M | 4 M | 6 M | 8 M | 62 M | ||||||
| 1 | Crankcase | CR00102-MMM02 | 1 | — | — | — | — | 2M | ||
| 1 | Crankcase | CR00102-MMM04 | — | 1 | — | — | — | 4M | ||
| 1 | Crankcase | CR00102-MMM06 | — | — | 1 | — | — | 6M | ||
| 1 | Crankcase | CR00102-MMM08 | — | — | — | 1 | — | 8M | ||
| 1 | Crankcase | CR00102-MMM062 | — | — | — | — | 1 | 62M | ||
| 2 | Crankshaft (crankshaft, crankshaft) | CR00202-M02 | 1 | — | — | — | — | 2M | ||
| 2 | Crankshaft (crankshaft, crankshaft) | CR00202-M04 | — | 1 | — | — | — | 4M | ||
| 2 | Crankshaft (crankshaft, crankshaft) | CR00202-M06 | — | — | 1 | — | — | 6M | ||
| 2 | Crankshaft (crankshaft, crankshaft) | CR00202-M08 | — | — | — | 1 | — | 8M | ||
| 2 | Crankshaft (crankshaft, crankshaft) | CR00202-M062 | — | — | — | — | 1 | 62M,62M-FM | ||
| 3 | Drag crank | CR00300-B12 | 1 | Same as 12WB | ||||||
| 4 | Mechlock | CR00400-M | 1 | |||||||
| 8 | Main bearing head (support bearing head) | CR00802-M | 1 | |||||||
| 9 | Main bearing gasket | CR00900-M | 1 | |||||||
| 10 | Hexagon head bolt, main bearing head | NB111016-075 | 16 | M16x75-10.9 | ||||||
| 12-1 | Main bushing (pump side) | CR01200-M1 | 1 | |||||||
| 12-2 | Main bushing (seal side) | CR01220-MS | 1 | |||||||
| 13 | Spring pin, thrust washer | NE3205-010V | 2 | 5x10AV | ||||||
| 14 | Oil filter assembly | CR01400-M | 1 | 20μm | ||||||
| 14-1 | Element assembly, oil filter | CR01410-M | 1 | |||||||
| 14-2 | O-ring, oil filter element | PAAS568-222 | 2 | AS568-222 | ||||||
| 14-3 | O-ring, oil filter case | PA12-090 | 1 | JISB2401 G90 | ||||||
| 15 | O-ring, Oil filter head | PA12-025 | 2 | JISB2401 G25 | ||||||
| 16 | Hexagon socket head cap screw, oil filter | NB35412-050 | 2 | M12xL50-12.9 | ||||||
| 16-1 | Plane washer for item No.16 | ND-110-12 | 2 | M12 | ||||||
| 20/171 | Service valve. For oil drain/initial oil charge, gas purge, connection for suction/ discharge/oil pressure | NF067-0303 | 5 | 6 | 8 | R3/8xRC 3/8 | ||||
| 22 | Oil pressure adjusting valve | NL152-SFX | 1 | Same as WA、WB (R3/4) | ||||||
| 22-1 | High stage return oil valve assembly | — | — | — | — | 1 | ||||
| 23 | Bearing head | CR02300-M | 1 | |||||||
| 23 | Bearing head | CR02300-M62FM | — | — | — | — | 1 | 62M-FM | ||
| 24 | Gasket, bearing head | CR02400-M | 1 | |||||||
| 24-1 | O-ring, bearing head | PA12-200 | 1 | JISB2401 G200 | ||||||
| 25 | Hexagon head bolt, bearing head | NB111016-065 | 10 | M16x65-10.9 | ||||||
| 26 | Shaft seal cover | CR02600-M | 1 | |||||||
| 27 | Gasket, shaft seal cover | CR77200-M | 1 | |||||||
| 28 | Hexagon head bolt, shaft seal cover | NB111012-075 | 8 | M12x75-10.9 | ||||||
| 29 | Thrust washer (pump side) | CR01210-M | 1 | |||||||
| 29-1 | Thrust roller bearing (thrust bearing) | CR02900-M | 1 | |||||||
| 32 | Mechanical seal assembly (mechanical shaft seal, shaft seal) | CR03200-MH | 1 | Type：MM-1 HNBR | ||||||
| 34 | Retainer, oil seal | CR03400-M | 1 | |||||||
| 35 | Oil seal | CR03500-M | 1 | AB4399A0 | ||||||
| 36 | Spring pin, seal retainer | NE3203-010 | 1 | 3x10AW | ||||||
| 37 | O-ring, oil seal retainer | PA12-160 | 1 | JISB2401 G160 | ||||||
| 39 | O-ring, mechanical seal collar | PAH82-245 | 1 | AS568-245 HNBR | ||||||
| 41-1 | Shower flushing sleeve | CR04100-M | 1 | |||||||
| 41-2 | O-ring, shower flushing sleeve | PA62-033 PA62-035 | 2 | AS568-257 | ||||||
| 41-3 | Hexagon socket set screw, shower flushing sleeve | NA83606-008 | 3 | M6x8 | ||||||
| 42 | O-ring, mechanical seal mating ring | PAH80-130 | 1 | JISB2401 P130 HNBR | ||||||
| 46 | Hand hole cover | CR04500-M | 1 | 2 | Window less | |||||
| 47 | Gasket, hand hole cover | CR04700-M | 1 | 2 | ||||||
| 48 | Hexagon head bolt, hand hole cover | NB111016-075 | 16 | 32 | M16x75-10.9 | |||||
| 49 | Head cover (air cooled) | CR04900-M | 1 | 2 | 3 | 4 | 4 | Air cooled specification | ||
| 50 | Head cover (water cooled) | CR04900-MW | 1 | 2 | 3 | 4 | 4 | Water cooled specification | ||
| 51 | Gasket, head cover | CR05100-M | 1 | 2 | 3 | 4 | 4 | |||
| 52 | Hexagon head bolt, head
cover |
NB111016-115 | 22 | 44 | 66 | 88 | 88 | M16x115-10.9 | ||
| 53 | Head jacket cover | CR05300-M | 1 | 2 | 3 | 4 | 4 | Water cooled specification | ||
| 54 | Hexagon head bolt, head
jacket cover |
NB17010-035 | 14 | 28 | 42 | 56 | 56 | M10x35-SUS/Water cooled specification | ||
| 55 | Gasket, head jacket cover | CR05500-M | 1 | 2 | 3 | 4 | 4 | For water cooled
head cover |
||
| 56 | Oil pump (oil pump) | CR05600-M | 1 | MG | ||||||
| 56 | Oil pump assembly | CR0569-M | 1 | with Gasket | ||||||
| 59 | Gasket, oil pump (oil pump with gasket) | CR05900-M | 1 | |||||||
| 60 | Hexagon socket head cap screw, oil pump | NB35412-040 | 8 | M12x40-12.9 | ||||||
| 61 | Cylinder sleeve (cylinder bush, cylinder liner) | CR06100-M | 2 | 4 | 6 | 8 | 8 | |||
| 61-1 | Spring pin, cylinder sleeve | NE3203-010 | 2 | 4 | 6 | 8 | 8 | 3x10AW | ||
| 62 | Cam ring (rightward sloped) | CR06200-MR | — | 4 | 6 | 4 | — | |||
| 63 | Cam ring (leftward sloped) | CR06200-ML | 1 | — | — | 4 | 4 | |||
| 65 | Retaining ring | CR06500-M | 1 | 4 | 6 | 8 | 4 | |||
| 67 | O-ring, cylinder sleeve | PA62-036 | 2 | 4 | 6 | 8 | 8 | AS568-258 | ||
| 68 | Lift pin | CR06800-M | 6 | 24 | 36 | 48 | 24 | Φ6xL155 | ||
| — | Lift pin set | CR06809-M | 2 | 4 | 6 | 8 | 8 | Each 6 (Lift pin, spring, E5-ring) | ||
| 69 | Spring, lift pin | CR06900-M | 6 | 24 | 36 | 48 | 24 | KK1090 | ||
| 70 | Stop ring, lift pin | NG13-E5 | 6 | 24 | 36 | 48 | 24 | E5 | ||
| 71 | Suction plate valve | CR07100-M | 2 | 4 | 8 | 6 | 8 | |||
| 72 | Spring, suction valve | CR07200-M | 20 | 40 | 60 | 80 | 80 | Type: for NH3 | ||
| 12 | 24 | 36 | 48 | 48 | Type: for HFC, Propane | |||||
| — | Spring set, suction valve | CR0729-M | 2 | 4 | 6 | 8 | 8 | |||
| 73 | Valve plate | CR07300-M2 CR07300-M3 | 1 | 2 | 3 | 4 | 4 | For NH3, pay attention to the stamped specification “N3" | ||
| 73-F | Valve plate | CR07300-MF | 1 | 2 | 3 | 4 | 4 | For HFC and propane, pay attention to the stamped specification “F” | ||
| 73-2 | Stud bolt, discharge valve cage | CR07500-M | 6 | 12 | 18 | 24 | 24 | |||
| 73-3 | Parallel pin, valve plate | NE2006B-025 | 2 | 4 | 6 | 8 | 8 | Parallel pin B type 6x25st | ||
| 73-4 | Gasket, valve plate | CR77800-M | 1 | 2 | 3 | 4 | 4 | |||
| 73-5 | Hexagon head bolt, valve plate | NB111016-045 | 3 | 6 | 9 | 12 | 12 | M16x45-10.9 | ||
| 73-2 | Stud bolt, discharge valve cage | CR07500-M | 6 | 12 | 18 | 24 | 24 | |||
| 77-S Assy | Connecting rod (No.1) (connecting rod) | CR07600-M1 | — | — | 2 | 4 | 2 | W36, L310, bushing | ||
| 77-L Assy | Connecting rod (No.2) (connecting rod) | CR07600-M2 | — | 4 | 4 | 4 | 4 | W46, L310, bushing | ||
| 77-H Assy | Connecting rod (High stage) (high stage connecting rod) | CR07600-M3 | — | — | — | — | 2 | W36, L310, Needle bearing | ||
| 77-2M Assy | Connecting rod (2M) (connecting rod) | CR07600-M4P | 2 | — | — | — | — | W56, L310, bushing | ||
| 78 | Hexagon head bolt, connecting rod | CR07800-M | — | 8 | 12 | 16 | 16 | M12x80-10.9 | ||
| 78-2M | Hexagon head bolt, connecting rod | NB111012-090 | 4 | — | — | — | — | M12x90-10.9 | ||
| 79 | Disk Lock Washer, connecting rod | CR07900-M | 4 | 8 | 12 | 16 | 16 | NL12 | ||
| 82 | Bushing, connecting rod (connecting rod bush) | CR08200-MF | 2 | 4 | 6 | 8 | 6 | Φ45xL56xT2.5 | ||
| 83 | Connecting rod needle bearing (connecting rod bushing needle bearing) | CR08300-M | — | — | — | — | 2 | Φ45xΦ59xL52 | ||
| 83-1 | Spiral retaining ring | CR83100-M | — | — | — | — | 4 | φ59 | ||
| 84 | Bearing halves (connecting rod inserts) | CR08400-M | — | 8 | 12 | 16 | 16 | Same shape for upper and lower | ||
| — | Bearing halves set (connecting rod inserts) | CR08409-M | — | 4 | 6 | 8 | 8 | |||
| 84-HS | Bearing halves (connecting rod inserts) | CR08400-HS | 4 | — | — | — | — | Same shape for upper and lower. Same shape for HS | ||
| 85 | Piston (piston) | CR08500-ALM | 2 | 4 | 6 | 8 | 8 | |||
| 86 | Piston pin (piston pin) | CR08600-M | 2 | 4 | 6 | 8 | 8 | |||
| 87 | Retaining ring, piston pin | NG11-045 | 4 | 8 | 12 | 16 | 16 | H45 | ||
| — | Retaining ring set, piston pin (Piston ring set) | CR8709-M | 2 | 4 | 6 | 8 | 8 | |||
| 89 | Piston ring (1st) | CR08900-MSPBF | 2 | 4 | 6 | 8 | 8 | SP-PC-BF2.5 | ||
| 90 | Piston ring (2nd) | CR08900-MFCT | 2 | 4 | 6 | 8 | 8 | FC-T2.0 | ||
| 100 | Oil control ring (3rd) with coil | CR08900-MSPDM | 2 | 4 | 6 | 8 | 8 | SP-PC-DM3.0 | ||
| — | Piston ring set (Piston ring set) | CR0899-M | 2 | 4 | 6 | 8 | 8 | |||
| 109 | Discharge valve cage (discharge valve) | CR10900-M2 | 2 | 4 | 6 | 8 | 8 | For NH3, pay attention to the stamped specification “N2" | ||
| 109-F | Discharge valve cage (F specification) (discharge valve) | CR10900-MF | 2 | 4 | 6 | 8 | 8 | For HFC and propane Pay attention to the stamped specification
“F” |
||
| 110 | Discharge plate valve | CR11000-M | 2 | 4 | 6 | 8 | 8 | For NH3, HFC and propane | ||
| 110-F | Inside discharge plate valve
(F specification) |
CR11000-MF | 2 | 4 | 6 | 8 | 8 | For HFC and propane | ||
| 111 | Discharge valve seat | CR11100-M | 2 | 4 | 6 | 8 | 8 | For NH3 Not stamped | ||
| 111-F | Discharge valve seat
(F specification) |
CR11100-MF | 2 | 4 | 6 | 8 | 8 | For HFC and propane. Not stamped | ||
| 112 | Hexagon head bolt, discharge valve seat | NB111010-040 | 6 | 12 | 18 | 24 | 24 | M10x40-10.9 For NH3 | ||
| 112-F | Hexagon head bolt, discharge
valve seat (F specification) |
CR11200-MF | 2 | 4 | 6 | 8 | 8 | For HFC and propane | ||
| 112-2 | Retainer, discharge valve seat bolt | CR77900-M | 2 | 4 | 6 | 8 | 8 | For NH3, pay attention to the stamped specification “N2" | ||
| 113-F | Discharge valve nut (F specification) | NC150-16 | 2 | 4 | 6 | 8 | 8 | Hard rock nut M16 For HFC and propane | ||
| 114 | Spring set, discharge valve | CR1169-M | 2 | 4 | 6 | 8 | 8 | For NH3 | ||
| 114 | Spring set, discharge valve | CR1169-M | 3 | 6 | 2 | 2 | 12 | For HFC and propane | ||
| 115 | Parallel pin, discharge valve seat | NE2006B-015 | 2 | 4 | 6 | 8 | 8 | Parallel pin B — 6x15st | ||
| 116 | Spring, discharge valve | CR11600-AB4 | 24 | 48 | 72 | 96 | 96 | Type IV For NH3 | ||
| 36 | 72 | 10
8 |
14
4 |
14
4 |
Type IV For HFC and propane | |||||
| 117 | Spring, safety head | CR11700-M | 2 | 4 | 6 | 8 | 8 | For NH3 | ||
| 117-F | Spring, safety head (F specification) | CR11700-MF | 2 | 4 | 6 | 8 | 8 | For HFC and propane | ||
| 118 | Nipple | R3/4 xL80 | NN420-080 | 2 | 2 | 2 | — | — | For oil strainer and oil cooler piping | |
| R3/4 xL100 | NN420-100 | — | — | — | 2 | 2 | ||||
| 119 | Oil strainer (oil filter) | CR11900-M | 1 | 100 mesh | ||||||
| 119-1 | Magnet | CR11910-M | 1 | φ20xφ8xt5 | ||||||
| 119-2 | Hexagon head bolt, magnet | NB111006-015 | 1 | M8x15-10.9 | ||||||
| 119-3 | Hexagon head plug, magnet | CR11930-M | 1 | Hexagon head plug (special, R1″) | ||||||
| Item No. | Part name | Code No. | Qty. | Remarks | ||||||
| 2 M | 4 M | 6 M | 8 M | 62 M | ||||||
| 119-4 | Spacer, magnet | 1 | ||||||||
| 135-M 0 | Unloader push rod (No.0) | CR13500-M60 | — | 2 | 3 | 4 | 3 | L208, Same for all suction side cylinder | ||
| 135-M 1 | Unloader push rod (No.1) | CR13500-M61 | — | 1 | 1 | 1 | 1 | L286.5, for discharge
side |
||
| 135-M 2 | Unloader push rod (No.2) | CR13500-M62 | 1 | 1 | 1 | 1 | — | L322.5, for discharge side | ||
| 135-M 3 | Unloader push rod (No.3) | CR13500-M63 | — | — | 1 | 1 | 1 | L358.5, for discharge side | ||
| 135-M 4 | Unloader push rod (No.4) | CR13500-M64 | — | — | — | 1 | 1 | L394.5, for discharge
side |
||
| 142 | Spring, unloader device | CR14200-M | 1 | 4 | 6 | 8 | 6 | KS4091 | ||
| 143 | Washer (No1), unloader push rod | CR14300-M1 | 1 | 4 | 6 | 4 | 6 | φ27xφ22.2xt3 | ||
| 143-1 | Washer (No2), unloader push rod | CR14300-M2 | 1 | 2 | 3 | 4 | 3 | φ32.8xφ23xt3 | ||
| 143-2 | Washer (No3), unloader push rod | CR14300-M3 | — | 2 | 3 | 4 | 3 | φ29.8xφ23xt3 | ||
| 144 | Retaining ring, unloader push rod | NGIS-022 | 1 | 4 | 6 | 8 | 6 | ISTW22 | ||
| — | Unloader push rod assembly 6M-0 | CR13509-M60 | — | 2 | 3 | 4 | 3 | Include parts No.142 to No.144 | ||
| — | Unloader push rod assembly 6M-1 | CR13509-M60 | — | 1 | 1 | 1 | 1 | |||
| — | Unloader push rod assembly 6M-2 | CR13509-M60 | 1 | 1 | 1 | 1 | 0 | |||
| — | Unloader push rod assembly 6M-3 | CR13509-M60 | — | — | 1 | 1 | 1 | |||
| — | Unloader push rod assembly 6M-4 | CR13509-M60 | — | — | — | 1 | 1 | |||
| 145 | Unloader piston (discharge piston) | CR14500-M | 1 | 2 | 3 | 4 | 3 | φ48 | ||
| 145-1 | O-ring, unloader piston | PA12-035 | — | 2 | 3 | 4 | 2 | JISB2401G35 | ||
| 146+2
05 |
Unloader Cover (built in solenoid valve) | KF121A-B | 1 | 2 | 3 | 4 | 3 | SB36A, same as K and L-series | ||
| 147 | Gasket, unloader cover | CR14700-K | 1 | 2 | 3 | 4 | 3 | Same as K and L- series | ||
| 149 | Hexagon head bolt, unloader cover | NB111008-035 | 4 | 8 | 12 | 16 | 12 | M8xL35-10.9 (Same as K and L- series) | ||
| 154 | Suction filter With O-ring | CR15400-M | 1 | 1 | 2 | 2 | 2 | 200 mesh (75 µm) | ||
| 154-1 | O-ring, suction filter | PA11-100 | 1 | 1 | 2 | 2 | 2 | JISB2401 P100 | ||
| 161 | Suction filter cover | CR16100-M | 1 | 1 | 2 | 2 | 2 | |||
| 162 | Gasket, suction filter cover | CR77000-M | 1 | 1 | 2 | 2 | 2 | |||
| 163 | Hexagon head bolt, suction filter cover | NB111016-055 | 6 | 6 | 12 | 12 | 12 | M16x55-10.9 | ||
| 164 | Oil sight glass | CR16400-HK | 1 | |||||||
| 165 | O-ring, oil sight glass | PAAS568-137 | 1 | AS568-137 | ||||||
| 167 | Hexagon head bolt, oil sight glass | NB111016-020 | 4 | M6x20-10.9 | ||||||
| 168 | Discharge manifold | CR16800-6M | — | 1 | 1 | 1 | 1 | |||
| 169 | Gasket, discharge manifold | CR16901-M1 | — | 2 | 3 | 4 | 4 | M1500 E1 | ||
| 170L | Hexagon head bolt (No.1), discharge manifold | NB111016-200 | — | — | 3 | — | — | M16x200-10.9 | ||
| 170M | Hexagon head bolt (No.2),
discharge manifold |
NB111016-170 | — | 8 | 10 | 20 | 18 | M16x170-10.9 | ||
| 170S | Hexagon head bolt (No.3), discharge manifold | NB111016-120 | — | 4 | 4 | 4 | 6 | M16x120-10.9 | ||
| 170C | Hexagon socket head cap
screw (No.4), discharge manifold |
NB35416-055 | — | — | 1 | — | — | M16x55-12.9 | ||
| 172 | Gasket, Shut-off valve | PL300-125 | — | — | 1 | 2 | — | ANSI #300 5”, t1.5 | ||
| 174-1 | Gasket, Shut-off valve | PL300-080 | — | — | — | — | 2 | ANSI #300 3”, t1.5 | ||
| 174B,
183B |
Hexagon head bolt, Shut-off valve | NB56520-095N2 | 16 | 16 | 16 | 16 | 32 | M20xl95 Stud bolt | ||
| 174N, 183N | Hexagon head bolt, Shut-off nut | NC140-20 | 16 | 16 | 16 | 16 | 32 | M20 | ||
| 184 | Gasket, Shut-off valve | PL300-100 | — | 2 | 1 | — | 1 | ANSI #300 4”, t1.5 | ||
| 184-1 | Gasket, Shut-off valve | PL300-065 | 2 | — | — | — | 1 | ANSI #300 2-1/2”, t1.5 | ||
| 185 | Oil cooler (water cooled) (oil cooler) | CR18500-TBMW | — | 1 | T-TCF-0.5 (Old type) | |||||
| — | 1 | OC-1050-WM (New
type) |
||||||||
| CR18500-TAW | 1 | — | T-TCF-0.15 | |||||||
| 198 | Thermometer, discharge side | LC1203314 | 1 | 1 | 1 | 1 | — | BT—T—50 (50—200°C) | ||
| 198-1 | Thermometer, discharge side | LC1203313 | 1 | — | — | — | 2 | BT—T—50 (0—150°C) | ||
| 200 | Thermometer, suction side | LC1203311 | — | 1 | 1 | 1 | 2 | BT—T—50 (—50—+50°C) | ||
| 208 | Eyebolt | NB600-20 | 2 | — | — | — | — | M20 | ||
| NB600-24 | — | — | 2 | 2 | 2 | M24 | ||||
| NB600-30 | — | 1 | — | — | — | M30 | ||||
| 213 | Safety valve | — | — | — | 1 | — | 32A | |||
| — | — | 1 | — | 1 | 25A | |||||
| 1 | 1 | — | — | 1 | 20A | |||||
| 305 | Blow-by gas plate | CR30500-M | 1 | |||||||
| 306 | Gasket, blow-by gas plate | CR30600-M | 1 | |||||||
| 307 | Hexagon socket head cap screw, blow-by gas plate | NB35408-015 | 10 | M8x15-12.9 | ||||||
| 707 | Flywheel | CR70700-M | 1 | for belt drive | ||||||
| — | Direct coupling, Type: E4-05-NF-40R/145R | MH14-05NF | 1 | for direct coupling | ||||||
| — | Direct coupling, Type: G4-05-NF-40R/145R | 1 | for direct coupling | |||||||
| — | Hexagon head bolt, direct coupling | NB15012-060-1.2 5 | 6 (E4) or 8 (G4) | M12xP1.25×60 | ||||||
| — | Hexagon head bolt, sub ring | NB15012-080 | 6 | for direct coupling, M12xL80 | ||||||
| 724-1 | Shut-off valve | — | — | 1 | 2 | — | GVFM (ANSI) 5" | |||
| 724-2 | Shut-off valve | — | 2 | 1 | — | 1 | GVFM (ANSI) 4” | |||
| 724-3 | Shut-off valve | — | — | — | — | 2 | GVFM (ANSI) 3” | |||
| 724-4 | Shut-off valve | 2 | — | — | — | 1 | GVFM (ANSI) 2-1/2" | |||
| HB-1 | Screw plug | MSW-24 | — | — | 2 | 2 | — | MSW24 | ||
| HB-2 | Hexagon socket set screw | NA83610-035 | — | 4 | M10x35, for attaching oil cooler | |||||
| HB-3 | Hexagon socket set screw | NA83608-035 | 4 | — | M8x35, for attaching oil cooler | |||||
| HN-1 | Hexagon nut | NC140-10 | — | 4 | M10 for attaching oil cooler | |||||
| HN-2 | Hexagon nut | NC140-08 | 4 | — | M8 for attaching oil cooler | |||||
| HT-1 | Bushing (R1/2×Rc3/8) | NF031-0403 | — | 1 | For oil drain | |||||
| HT-2 | Bushing (R3/4×Rc1/2) | NF031-0604 | — | — | 1 | — | — | For thermometer at discharge | ||
| HT-3 | Bushing (R3/4xRC3/8) | NF031-0603 | 1 | For initial oil charge | ||||||
| HT-4 | Bushing (RC5/4xR3/4) | NF031-1006 | 2 | For Oil cooler piping | ||||||
| HT-5 | Street elbow (High pressure, R3/4xRC3/4) | NN130-06 | — | — | 1 | — | — | For Oil cooler piping | ||
| HT-6 | Connection (L-type, R3/4xΦ27) | NJ3-2706 | 3 | 3 | 4 | 3 | 3 | For Oil cooler piping | ||
| HT-7 | Connection (L-type, R1/4xΦ10) | NJ3-1002NE | — | — | 4 | — | — | For oil drain | ||
| HT-8 | Connection (i-Type, R3/4xΦ27) | NJ2-2706 | 1 | 1 | — | 1 | 1 | For Oil cooler piping | ||
| HT-9 | Connection (i-Type, R1/4xΦ10) | NJ2-1002NE | — | 4 | — | — | — | |||
| HT-10 | Connection (i-Type, R3/8xΦ6) | NJ2-0603NE | 3 | 4 | For suction, discharge and oil pressure | |||||
| HT-11 | Connection (i-Type, R1/8xΦ6) | NJ2-0601NE | 1 | For seal drain | ||||||
| HT-12 | Pipe, oil cooler | QA11-020 | 2 | 2 | 2 | 2 | 2 | 20A steel pipe, fixed length | ||
| HT-13 | Pipe, oil drain | QA1102-10 | — | 2 | 2 | — | — | φ10 annealed pipe, fixed length | ||
| HT-14 | Pipe, seal drain | QA1102-06 | 1 | φ6 annealed pipe, fixed length | ||||||
| HT-15 | Hose nipple (R3/8) | NM52-020 | 3 | 4 | For oil drain, initial oil charge and purging | |||||
| HT-16 | Hose nipple (R3/4) | NM53-0650 | 2 | 6 | 8 | 10 | 10 | For water cooled head cover and OC cooling water | ||
| HT-17 | Street elbow (R3/4xRC3/4) | NN130-06 | 2 | 5 | 7 | 9 | 9 | For water cooled head cover and OC cooling water | ||
| HT-18 | Hose band (20A) | PN905-020 | 2 | 4 | 6 | 8 | 8 | For water cooled head cover | ||
| HT-19 | Blade hose (20A) | PN015-020 (m） | 2m | 3m | 3m | 4m | 4m | For water cooled head cover | ||
| HT-20 | Nipple | — | — | — | 1 | — | R5/4xL100 | |||
| NN425-100 | — | — | 1 | — | 1 | R1″XL100 | ||||
| NN420-100 | — | 2 | — | — | 1 | R3/4xL100 | ||||
| NN420-050 | 2 | — | — | — | — | R3/4xL50 | ||||
| HT-21 | Nipple (Special) | — | — | — | 1 | — | NPT5/4xR5/4xL100 | |||
| — | — | 1 | — | 1 | NPT1″XR1″XL100 | |||||
| HT-22 | Elbow (High pressure) | NN120-10 | — | — | — | 1 | — | RC5/4xRC5/4 | ||
| NN120-08 | — | — | 1 | — | 1 | RC1″xRC1″ | ||||
| NN120-06 | 1 | 1 | — | — | 1 | RC3/4xRC3/4 | ||||
| HT-23 | Bushing (R1/2xRC1/4) | NF031-0402 | 1 | － | for equalizing valve (start up) | |||||
| HT-24 | Connection (L-type, R3/8xΦ12) | NJ3-1203NE | 1 | － | for equalizing valve (start up) | |||||
| HT-25 | Connection (L-type, R3/8xΦ6) | NJ3-0603NE | 1 | － | for equalizing valve (start up) | |||||
| HT-26 | Connection (L-type, R1/4xΦ6 Throttle) | NJ3-0602SNE | 1 | － | for equalizing valve (start up) | |||||
| HT-27 | Connection (i-Type, R3/8xΦ12) | NJ2-1203NE | 1 | － | for equalizing valve (start up) | |||||
| HT-28 | Pipe, high pressure gas for equalizing valve (startup) | QA1102-12 | 1 | － | φ12 annealed pipe, fixed length | |||||
| HT-29 | Pipe, oil for equalizing valve (startup) | QA1102-06 | 1 | － | φ6 annealed pipe, fixed length | |||||
| HT-30 | Hexagon nipple (R3/8) | NF01-03 | 2 | － | for equalizing valve (start up) | |||||
| HT-31 | T socket (High pressure) Rc3/8 | NN210-03 | 1 | － | for equalizing valve (start up) | |||||
| HT-32 | Equalizing valve (startup) | 1 | － | |||||||
| P-1 | Plug (R1/4 orifice φ3) | NF06-008 | 1 | For seal oil drain, Drilling to NF06-008 | ||||||
| P-2 | Plug (R1/8) | NF06-004 | 1 | 3 | 4 | 5 | 3 | For unloader and seal oil supply | ||
| P-3 | Plug (R1/4) | NF06-008 | 7 | 8 | 8 | 12 | 11 | For seal oil drain, oil drain and relief | ||
| P-4 | Plug (R3/8) | NF06-010 | 3 | 3 | 3 | 3 | 3 | For suction chamber and shaft | ||
| P-5 | Plug (R1/2) | NF06-015 | 5 | 6 | 6 | 5 | 5 | For MBH, OS return and internal oil line | ||
| P-6 | Plug (R3/4) | NF06-020 | 2 | 9 | 5 | 8 | 7 | For unloader, internal oil line and oil supply | ||
| P-7 | Plug (R1”) | NF06-025 | 3 | 5 | 6 | 5 | 5 | For heater, MBH, pressure equalizer | ||
| P-8 | Plug (R1″1/4) | NF06-032 | — | — | — | 1 | — | For safety valve | ||
| P-24 | Thermometer plug | NL051-04M | 1 | 1 | 1 | 1 | 4 | R1/2xL50 | ||
| P-25 | Thermometer plug | KS111-05 | 1 | 1 | 1 | 1 | — | R1/2xL100 | ||
| — | O-ring set for 2M | CR71009-2M | 1 | — | — | — | — | |||
| — | O-ring set for 4M | CR71009-4M | — | 1 | — | — | — | |||
| — | O-ring set for 6M | CR71009-6M | — | — | 1 | — | — | |||
| — | O-ring set for 8M | CR71009-8M | — | — | — | 1 | 1 | |||
| — | Gasket set for 2M | CR71119-2M | 1 | — | — | — | — | |||
| — | Gasket set for 4M | CR71119-4M | — | 1 | — | — | — | |||
| — | Gasket set for 6M | CR71119-6M | — | — | 1 | — | — | |||
| — | Gasket set for 8M | CR71119-8M | — | — | — | 1 | — | |||
| — | Gasket set for 62M | CR71119-62M | — | — | — | — | 1 | |||
| — | Indentation tools for main bushing | CR7039-M | 1 | |||||||
Mycom screw compressors
Mycom V compressors Mycom VR compressors Mycom UD compressors Mycom J compressors Mycom I compressors Mycom Compound compressors
Mycom piston compressors
Mycom 6HK compressors Mycom K compressors Mycom L compressors Mycom M compressors Mycom W compressors Mycom WBHE compressors