- En →
- Zapchasti Kompressorov →
- Kompressory Mycom →
- Katalog Zapchastey K Kompressoram Mycom Wbhe
Toros LLC is industrial cold of Europe
Spare parts, repair and maintenance of refrigeration units.
Spare parts for compressors in stock and on order!
call:
WhatsApp
e-mail: storopov86@gmail.com
Mycom WBHE Compressor Spare Parts Catalogue
| Part No. | Part Name | Quantity | Remarks | ||||
| 4 | 6 | 8 | 42 | 62 | |||
| 1 | Crankcase | 1 | 1 | 1 | 1 | 1 | |
| 2 | Crankshaft (crankshaft, crankshaft) | 1 | 1 | 1 | 1 | 1 | Standard or BB |
| 3 | Drag crank | 1 | 1 | 1 | 1 | 1 | |
| 4 | Shaft key | 1 | 1 | 1 | 1 | 1 | 24×15.6×L110 |
| 5 | Flat washer | 1 | 1 | 1 | 1 | 1 | φ90 |
| 6 | Lock washer | 1 | 1 | 1 | 1 | 1 | For M27 |
| 7 | Flywheel set bolt | 1 | 1 | 1 | 1 | 1 | M27×L50 (P=1.5) |
| 8 | Main bearing head | 1 | 1 | 1 | 1 | 1 | |
| 9 | Main bearing head gasket | 1 | 1 | 1 | 1 | 1 | |
| 10 | Main bearing head hexagon head bolt (short) | 14 | 14 | 14 | 14 | 14 | M16×L55-8.8 |
| 11 | Main bearing head hexagon head bolt (long) | 2 | 2 | 2 | 2 | 2 | M16×L110-8.8 |
| 12 | Main bearing (support bearing, main bearing) | 1 | 1 | 1 | 1 | 1 | |
| 225 | Main bearing “O” ring (for single two-stage compressor) | — | — | — | 2 | 2 | |
| 13 | Main bearing screw | 1 | 1 | 1 | 1 | 1 | M6×L15-4.8 |
| 14 | CUNO filter assembly | 1 | 1 | 1 | 1 | 1 | |
| 15 | CUNO filter cover gasket | 1 | 1 | 1 | 1 | 1 | |
| 16 | CUNO filter cover hexagon head bolt | 4 | 4 | 4 | 4 | 4 | M10×L30-6.8 (small head) |
| 22 | Oil pressure adjusting valve assembly | 1 | 1 | 1 | 1 | 1 | |
| 26 | Cover plate | 1 | 1 | 1 | 1 | 1 | |
| 27 | Cover plate gasket | 1 | 1 | 1 | 1 | 1 | |
| 27-1 | Cover plate “O” ring | 1 | 1 | 1 | 1 | 1 | JIS B 2401 G230 |
| 28 | Cover plate hexagon head bolt | 12 | 12 | 12 | 12 | 12 | M16×L55-8.8 |
| 29 | Thrust bearing | 1 | 1 | 1 | 1 | 1 | Standard |
| 29-1 | Thrust bearing (B.B type) (thrust bearing) | 1 | 1 | 1 | — | — | For BB |
| 226 | Thrust bearing “O” ring (for single two-stage compressor) | — | — | — | 2 | 2 | |
| 30 | Thrust bearing hexagon head bolt washer | 6 | 6 | 6 | 6 | 6 | For M12 (small head) |
| 31 | Thrust bearing hexagon head bolt | 6 | 6 | 6 | 6 | 6 | M12×L40-8.8 |
| 32 | Shaft seal assembly | 1 | 1 | 1 | 1 | 1 | |
| 34 | Seal ring | 1 | 1 | 1 | 1 | 1 | |
| 37 | Seal ring “O” ring | 1 | 1 | 1 | 1 | 1 | |
| 35 | Drive collar assembly | 1 | 1 | 1 | 1 | 1 | |
| 39 | Drive collar “O” ring | 1 | 1 | 1 | 1 | 1 | |
| 41 | Floating seat | 1 | 1 | 1 | 1 | 1 | |
| 42 | Floating seat “O” ring | 2 | 2 | 2 | 2 | 2 | |
| 45 | Hand hole cover (with window) | 1 | 1 | 1 | 1 | 1 | |
| 46 | Hand hole cover (without window) | 1 | 1 | 1 | 1 | 1 | |
| 47 | Hand hole cover gasket | 2 | 2 | 2 | 2 | 2 | |
| 48 | Hand hole cover screw | 32 | 32 | 32 | 32 | 32 | M16×L55-8.8 |
| 49 | Head cover (air cooled) | 2 | 3 | 4 | 3 | 4 | Not used with water cooled specification. |
| 50 | Head cover (water cooled) | 2 | 3 | 4 | 3 | 4 | Not used with air cooled specification. |
| 51 | Head cover gasket | 2 | 3 | 4 | 3 | 4 | |
| 52 | Head cover screw | 44 | 66 | 88 | 66 | 88 | M16×L45-10.9 |
| 53 | Head jacket cover | 2 | 3 | 4 | 3 | 4 | Not used with air cooled specification. |
| 54 | Head jacket cover screw | 24 | 36 | 48 | 36 | 48 | M10×L25. Not used with air cooled specification. |
| 55 | Head jacket cover gasket | 2 | 3 | 4 | 3 | 4 | Not used with air cooled specification. |
| 56 | Oil pump assembly (oil pump assembly) | 1 | 1 | 1 | 1 | 1 | Refer to “7.3 Specification of Oil Pump”. |
| 58 | Oil pump “O” ring | 1 | 1 | 1 | 1 | 1 | JIS W 1516 P43 |
| 59 | Oil pump gasket | 1 | 1 | 1 | 1 | 1 | |
| 60 | Oil pump hexagon head screw | 6 | 6 | 6 | 6 | 6 | M12×L40-8.8*2 |
| 61 | Cylinder sleeve (cylinder bush, cylinder liner) | 4 | 6 | 8 | 6 | 8 | |
| 62 | Cam ring (leftward sloped) | 2 | 2 | 2 | 4 | 4 | |
| 63 | Cam ring (rightward sloped) | 2 | 2 | 4 | — | 2 | |
| 65 | Retaining ring | 4 | 4 | 6 | 4 | 6 | |
| 66 | Cylinder sleeve gasket | 4 | 6 | 8 | 6 | 8 | |
| 67 | Cylinder sleeve “O” ring (for high stage in single two-stage compressor) | — | — | — | 2 | 2 | |
| 68 | Lift pin | 24 | 24 | 36 | 24 | 36 | |
| 69 | Lift pin spring | 24 | 24 | 36 | 24 | 36 | |
| 70 | Lift pin stop ring | 24 | 24 | 36 | 24 | 36 | E4 |
| 71 | Suction valve | 4 | 6 | 8 | 6 | 8 | |
| 72 | Suction valve spring | 32 | 48 | 64 | L 36 (32) | L 54 (48) | N, R: TYPE II. Others: TYPE IV |
| H 16 | H 16 | ||||||
| 73 | Valve plate | 4 | 6 | 8 | L 4 | L 6 | Refer to “7.4 Specification List of Suction Valve and Discharge Valve”. |
| H 2 | H 2 | ||||||
| 74 | Discharge valve cage guide | 4 | 6 | 8 | 6 | 8 | |
| 75 | Discharge valve cage guide hexagon head bolt | 20 | 30 | 40 | 30 | 40 | M12×L60-8.8 (P=1.25) |
| 76 | Connecting rod assembly (for high stage in single two-stage compressor) (connecting rod assembly) | — | — | — | 2 | 2 | |
| 77 | Connecting rod assembly (connecting rod assembly) | 4 | 6 | 8 | 4 | 6 | |
| 78 | Connecting rod screw | 8 | 12 | 16 | 12 | 16 | 1/2-20UNF×L140 |
| 79 | Connecting rod hexagon head bolt washer | 8 | 12 | 16 | 12 | 16 | |
| 80 | Connecting rod tightening nut (first) | 8 | 12 | 16 | 12 | 16 | 1/2-20UNF |
| 81 | Connecting rod tightening nut (second) | 8 | 12 | 16 | 12 | 16 | 1/2-20UNF |
| 82 | Connecting rod bushing (connecting rod bush) | 4 | 6 | 8 | 4 | 6 | |
| 83 | Connecting rod needle bearing (for high stage in single two-stage compressor) (connecting rod bushing needle bearing) | — | — | — | 2 | 2 | |
| 84U | Bearing halves (top) (connecting rod inserts) | 4 | 6 | 8 | 6 | 8 | |
| 84L | Bearing halves (bottom) (connecting rod inserts) | 4 | 6 | 8 | 6 | 8 | |
| 85 | Piston (piston) | 4 | 6 | 8 | 6 | 8 | |
| 86 | Piston pin (piston pin) | 4 | 6 | 8 | 6 | 8 | |
| 87 | Piston pin locking spring | 8 | 12 | 16 | 12 | 16 | |
| 89 | Piston ring 1st | 4 | 6 | 8 | 6 | 8 | |
| 90 | Piston ring 2nd | 4 | 6 | 8 | 6 | 8 | |
| 100 | Oil ring 3rd | 4 | 6 | 8 | 6 | 8 | |
| 101 | Oil ring 4th | 4 | 6 | 8 | 6 | 8 | Not used with three-ring specification. |
| 109 | Discharge valve cage | 4 | 6 | 8 | L 4 | L 6 | Refer to “7.4 Specification List of Suction Valve and Discharge Valve”. |
| H 2 | H 2 | ||||||
| 110 | Discharge valve (discharge valve) | 4 | 6 | 8 | 6 | 8 | |
| 111 | Discharge valve seat | 4 | 6 | 8 | 6 | 8 | |
| 112 | Discharge valve hexagon head bolt | 4 | 6 | 8 | 6 | 8 | 5/8-18UNF×L82 |
| 113 | Discharge valve tightening nut (first) | 4 | 6 | 8 | 6 | 8 | 5/8-18UNF |
| 114 | Discharge valve tightening nut (second) | 4 | 6 | 8 | 6 | 8 | 5/8-18UNF |
| 116 | Discharge valve spring | 48 | 72 | 96 | L 36 | L 54 | SR, NR: TYPE III. Others: TYPE IV |
| H 24 | H 24 | ||||||
| 117 | Safety head spring | 4 | 6 | 8 | 6 | 8 | |
| 119 | Oil strainer (oil filter) | 1 | 1 | 1 | 1 | 1 | |
| 121 | Oil strainer cover | 1 | 1 | 1 | 1 | 1 | |
| 122 | Oil strainer cover gasket | 1 | 1 | 1 | 1 | 1 | |
| 123 | Oil strainer cover hexagon head bolt | 4 | 4 | 4 | 4 | 4 | M10×L30-6.8 (small head) |
| 135 | Unloader push rod | Refer to “4.3 Capacity Control Order”. | |||||
| 142 | Unloader device spring | 2 | 2 | 3 | 2 | 3 | |
| 143 | Pushrod washer | 2 | 2 | 3 | 2 | 3 | |
| 144 | Pushrod hexagon head bolt | 2 | 2 | 3 | 2 | 3 | M10×L20-4.6 (small head) |
| 145 | Unloader piston (discharge piston) | 2 | 2 | 3 | 2 | 3 | |
| 146 | Unloader piston cover | 2 | 2 | 3 | 2 | 3 | |
| 147 | Unloader piston cover gasket | 2 | 2 | 3 | 2 | 3 | |
| 149 | Unloader piston cover hexagon head bolt | 12 | 12 | 18 | 12 | 18 | M10×L35-8.8 |
| 150 | Unloader piston cover hexagon socket head bolt | 2 | 2 | 3 | 2 | 3 | W 1/4×L15-10.9 |
| 150-1 | Hexagon socket head bolt washer | 2 | 2 | 3 | 2 | 3 | |
| 154 | Suction strainer (suction filter) | 1 | 2 | 2 | — | — | *1 |
| 156 | Suction filter metal mesh canvas | 1 | 2 | 2 | — | — | *1 |
| 158 | Suction strainer holder spring | 1 | 2 | 2 | — | — | *1 |
| 159 | Canvas holder snap ring | 1 | 2 | 2 | — | — | *1 |
| 161 | Suction end cover | 1 | 2 | 2 | — | — | |
| 162 | Suction end cover gasket | 1 | 2 | 2 | — | — | |
| 163 | Suction end cover hexagon head bolt | 8 | 16 | 16 | — | — | M12×L40-8.8 |
| 164 | Oil sight glass | 1 | 1 | 1 | 1 | 1 | |
| 165 | Oil sight glass “O” ring | 2 | 2 | 2 | 2 | 2 | JIS W 1516 P35 |
| 166 | Oil sight gland | 1 | 1 | 1 | 1 | 1 | |
| 167 | Oil sight gland hexagon head bolt | 4 | 4 | 4 | 4 | 4 | M10×L30-6.8 (small head) |
| 168 | Discharge elbow | — | 1 | 1 | L 1 | L 1 | (Refer to A in “7.2 Specification of Discharge Elbow and Scale Trap”.) |
| H 1 | H 1 | ||||||
| 169 | Discharge elbow gasket | — | 1 | 1 | L 1 | L 1 | (Refer to B in “7.2 Specification of Discharge Elbow and Scale Trap”.) |
| H 1 | H 1 | ||||||
| 170 | Discharge elbow hexagon head bolt | — | 4 | 4 | L 4 | L 4 | (Refer to C in “7.2 Specification of Discharge Elbow and Scale Trap”.) |
| (1) 2 | (1) 2 | ||||||
| (2) 2 | (2) 2 | ||||||
| 172 | Discharge shut-off valve mating gasket | 2 | 1 | 1 | L 1 | L 1 | |
| H 1 | H 1 | ||||||
| 173 | Discharge shut-off valve | 1 | 1 | 1 | L 1 | L 1 | |
| H 1 | H 1 | ||||||
| 173-1 | Discharge shut-off valve companion flange | 1 | 1 | 1 | L 1 | L 1 | |
| H 1 | H 1 | ||||||
| 173B | Discharge shut-off valve companion flange mounting bolt and nut | 4 | 4 | 4 | L 4 | L 4 | |
| H 4 | H 4 | ||||||
| 174 | Discharge shut-off valve mounting bolt and nut | 4 | 4 | 4 | L 4 | L 4 | |
| H 4 | H 4 | ||||||
| 175 | Scale trap | — | 1 | 1 | L 1 | L 1 | (Refer to D in “7.2 Specification of Discharge Elbow and Scale Trap”.) |
| H 1 | H 1 | ||||||
| 176 | Scale trap mating gasket | — | 1 | 1 | L 1 | L 1 | (Refer to E in “7.2 Specification of Discharge Elbow and Scale Trap”.) |
| H 1 | H 1 | ||||||
| 177 | Scale trap hexagon head bolt | — | 4 | 4 | 8 | L 4 | (Refer to F in “7.2 Specification of Discharge Elbow and Scale Trap”.) |
| H 4 | |||||||
| 178 | Scale Trap Screen | — | 1 | 1 | 2 | L 1 | |
| H 1 | |||||||
| 178-1 | Scale trap metal mesh canvas | — | 1 | 1 | L 1 | L 1 | |
| H 1 | H 1 | ||||||
| 179 | Scale trap cover | — | 1 | 1 | 2 | L 1 | |
| H 1 | |||||||
| 180 | Scale trap cover gasket | — | 1 | 1 | 2 | L 1 | |
| H 1 | |||||||
| 181 | Scale trap cover hexagon head bolt | — | 8 | 8 | 8 | L 8 | M12×L40-8.8 |
| H 4 | |||||||
| 182 | Suction shut-off valve | 1 | 1 | 1 | L 1 | L 1 | |
| H 1 | H 1 | ||||||
| 182-1 | Suction shut-off valve companion flange | 1 | 1 | 1 | L 1 | L 1 | |
| H 1 | H 1 | ||||||
| 182B | Suction shut-off valve companion flange mounting bolt and nut | 4 | 4 | 4 | L 4 | L 4 | |
| H 4 | H 4 | ||||||
| 183 | Suction shut-off valve mounting bolt and nut | 4 | 4 | 4 | L 4 | L 4 | |
| H 4 | H 4 | ||||||
| 184 | Suction shut-off valve mating gasket | 2 | 2 | 2 | L 2 | L 2 | |
| H 2 | H 2 | ||||||
| 185W | Water-cooled oil cooler assembly (oil cooler assembly) | (1) | (1) | (1) | (1) | (1) | |
| 185R | Lubricating oils cooler assembly | (1) | (1) | (1) | (1) | (1) | |
| 197 | Thermometer set (discharge side) | (1) | (1) | (1) | (2) | (2) | |
| 234 | Head jacket cover water flange | 4 | 6 | 8 | 6 | 8 | |
| 235 | Head jacket cover water flange gasket | 4 | 6 | 8 | 6 | 8 | |
| 236 | Head jacket cover water flange hexagon head bolt | 8 | 12 | 16 | 12 | 16 | |
| 205 | Unloader solenoid valve | (1) | (1) | (1) | (1) | (1) | |
| JO4140 | T-type half union (R3/8×Ø6×R3/8) | (1) | (1) | (1) | (1) | (1) | |
Mycom screw compressors
Mycom V compressors Mycom VR compressors Mycom UD compressors Mycom J compressors Mycom I compressors Mycom Compound compressors
Mycom piston compressors
Mycom 6HK compressors Mycom K compressors Mycom L compressors Mycom M compressors Mycom W compressors Mycom WBHE compressors