- En →
- Zapchasti Kompressorov →
- Kompressory Sabroe →
- Cmo 24 26 28 Tcmo 28
Toros LLC is industrial cold of Europe
Spare parts, repair and maintenance of refrigeration units.
Spare parts for compressors in stock and on order!
call:
WhatsApp
e-mail: storopov86@gmail.com
Spare parts for Sabroe CMO 24-26-28, TCMO 28 compressors
| Spare parts for CMO 24-26-28 & TCMO 28 | |||||||
| CMO 24-28 | TCMO 28 | ||||||
| Drawings for the compressor | 0662-213 | 0662-214/217 | |||||
| Cylinder liner | 0662-212 | ||||||
| Pos. | Designation | Weight each in kg | Number each compressor | Part no. | |||
| CMO 24 | CMO 26 | CMO 28 | TCMO 28 | ||||
| Compressor frame | |||||||
| 1A-1 | Frame CMO 24 | 1 | 3111-076 | ||||
| 1A-2 | Frame CMO 26 | 1 | 3111-077 | ||||
| 1A-3 | Frame CMO 28 | 1 | 3111-078 | ||||
| 1A-4 | Frame TCMO 28, int. IP connection | 1 | 3111-079 | ||||
| 1A-4 | Frame TCMO 28, ext. IP connection | 1 | 3111-088 | ||||
| 1B-1 | Non return valve | 0.400 | 1 | 1 | 1 | 1 | 2415-031 |
| 1C-1 | Hexagon plug G 3/4" with collar | 0.065 | 1 | 1 | 1 | 1 | 2314-027 |
| 1D-1 | Gasket for plug dia. 34/27 x 1.5 | 0.002 | 1 | 1 | 1 | 1 | 2356-140 |
| 1E-1 | Hexagon plug with collar G 1/2" | 0.128 | 1 | 1 | 1 | 1 | 2314-026 |
| 1F-1 | Gasket for plug dia. 27/21 x 1.5 | 0.008 | 1 | 1 | 1 | 1 | 2356-133 |
| Top cover - air cooled | |||||||
| 2A-1 | Top cover | 2.960 | 2 | 3 | 4 | 4 | 3113-198 |
| 2B-1 | Gasket for top cover | 0.012 | 2 | 3 | 4 | 4 | 2353-190 |
| 2C-1 | Hexagon head M12 x 70 | 0.080 | 24 | 36 | 48 | 48 | 1424-061 |
| 2D-1 | Washer dia. 24/13x2.5 | 0.006 | 24 | 36 | 48 | 48 | 1436-036 |
| Top cover - water cooled (see sketch below) | |||||||
| 2A-1 | Top cover | 2 | 3 | 4 | 4 | 3113-198 | |
| 2B-1 | Gasket for top cover | 0.012 | 2 | 3 | 4 | 4 | 2353-101 |
| 2C-3 | Hexagon head screw M12 x 90 | 0.092 | 24 | 36 | 48 | 48 | 1424-064 |
| 2D-3 | Washer dia. 24/13x2.5 | 0.006 | 24 | 36 | 48 | 48 | 1436-036 |
| 2K-3 | Water cover | 2 | 3 | 4 | 4 | 3113-166 | |
| 2L-3 | Gasket for water cover | 0.012 | 2 | 3 | 4 | 4 | 2353-172 |
| 2M-3 | Hexagon head screw M8 x 30 | 0.014 | 4 | 6 | 8 | 8 | 1424-169 |
| 2N-3 | Chamfered washer dia, 17/8.4 x 1.6 | 0.002 | 4 | 6 | 8 | 8 | 1436-034 |
| 2P-3 | Rubber cord dia. 10 x 220 | 0.015 | 2 | 3 | 4 | 4 | 1323-077 |
| Side cover with oil level glass | |||||||
| 3A-1 | Side cover - air cooled | 6.830 | 1 | 1 | 1 | 1 | 3113-099 |
| 3B-1 | Gasket for side cover | 0.012 | 1 | 1 | 1 | 1 | 2353-190 |
| 3C-1 | Hexagon head screw M12 x 65 | 0.070 | 12 | 12 | 12 | 12 | 1424-059 |
| 3D-1 | Washer dia. 24/13x2.5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
| 3G-1 | Oil level glass | 0.220 | 1 | 1 | 1 | 1 | 1226-015 |
| 3H-1 | O-ring dia. 52.07x2.62 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
| 3J-1 | Hexagon head screw M6 x 18 | 0.004 | 4 | 4 | 4 | 4 | 1424-148 |
| Side cover - water cooled | |||||||
| 3A-2 | Side cover | 1 | 1 | 1 | 1 | 3113-167 | |
| 3B-2 | Gasket for side cover | 0.012 | 1 | 1 | 1 | 1 | 2353-172 |
| 3C-2 | Hexagon head screw M12 x 50 | 0.052 | 12 | 12 | 12 | 12 | 1424-219 |
| 3D-2 | Washer for dia. 24/13 x 2.5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
| 3K-2 | Water cover | 1 | 1 | 1 | 1 | 3113-166 | |
| 3L-2 | Gasket for water cover | 1 | 1 | 1 | 1 | 2353-172 | |
| 3M-2 | Hexagon head screw MS x 25 | 0.014 | 2 | 2 | 2 | 2 | 1424-168 |
| 3N-2 | Washer for M8 | 0.002 | 2 | 2 | 2 | 2 | 1436-034 |
| 3P-2 | Rubber cord dia. 10 x 220 | 0.015 | 1 | 1 | 1 | 1 | 1323-077 |
| End cover at pump | |||||||
| 4A-1 | End cover at pump - CMO | 34.500 | 1 | 1 | 1 | 3113-006 | |
| 4A-2 | End cover at pump - TCMO int. IP | 34.500 | 1 | 3113-112 | |||
| 4A-2 | End cover at pump - TCMO ext- IP | 34.500 | 1 | 3113-214 | |||
| 4B-1 | Gasket for end cover - CMO | 0.050 | 1 | 1 | 1 | 2353-105 | |
| 4B-2 | Gasket for end cover - TCMO int. JP | 0.056 | 1 | 2353-142 | |||
| 48-2 | Gasket for end cover - TCMO ext. IP | 0.056 | 1 | 2353-182 | |||
| 4C-1 | Hexagon head screw M14 x 110 | 0.148 | 14 | 14 | 14 | 14 | 1424-087 |
| 4D-1 | Hexagon head screw M14 x 120 | 0.160 | 2 | 2 | 2 | 2 | 1424-090 |
| 4E-1 | Washer dia. 23/16x3 | 0.008 | 18 | 18 | 18 | 18 | 1436-037 |
| Bearing cover al pump | |||||||
| 5A-1 | Bearing cover | 1 | 1 | 1 | 1 | 3113-168 | |
| 5B-1 | Gasket 0.3 mm | 0.007 | 1 | 1 | 1 | 1 | 2353-166 |
| 5B-2 | Gasket 0.5 mm | 0.010 | 1 | 1 | 1 | 1 | 2353-167 |
| 5B-3 | Gasket 0.8 mm | 0.016 | 1 | 1 | 1 | 1 | 2353-168 |
| 5B-4 | Gasket 1.0 mm | 0.020 | 1 | 1 | 1 | 1 | 2353-169 |
| 5C-1 | Hexagon head screw M10x40 | 0.032 | 8 | 8 | 8 | 8 | 1424-194 |
| 5E-1 | Main bearing bushing | 1 | 1 | 1 | 1 | 2132-086 | |
| 5E-2 | Main bearing bushing for repair -0.5 mm undersize | 1 | 1 | 1 | 1 | 2132-088 | |
| Bearing cover at shaft end | |||||||
| 6A-1 | Bearing cover at shaft end | 1 | 1 | 1 | 1 | 3113-169 | |
| 6B-1 | Gasket 0.5 mm | 0.010 | 1 | 1 | 1 | 1 | 2353-167 |
| 6C-1 | Hexagon head screw M10x35 | 0.030 | 7 | 7 | 7 | 7 | 1424-193 |
| 6D-1 | Haxagon head screw M10x50 | 1 | 1 | 1 | 1 | 1424-196 | |
| 6E-1 | Main bushing | 1 | 1 | 1 | 1 | 2132-086 | |
| 6E-2 | Main bushing for repair -0.5 mm undersize | 1 | 1 | 1 | 1 | 2132-088 | |
| End cover al shaft end | |||||||
| 7A-1 | End cover | 1 | 1 | 1 | 1 | 3113-172 | |
| 7B-1 | Gasket for end cover | 0.022 | 1 | 1 | 1 | 1 | 2353-104 |
| 7C-1 | O-ring dia. 132.7x 7 | 0.024 | 1 | 1 | 1 | 1 | 1331-050 |
| 7D-1 | Hexagon head screw M14 x 90 | 0.126 | 14 | 14 | 14 | 14 | 1424-083 |
| 7E-1 | Hexagon head screw M14 x 160 | 0.208 | 2 | 2 | 2 | 2 | 1424-095 |
| 7F-1 | Was her dia. 28/15x3 | 0.008 | 16 | 16 | 16 | 16 | 1436-037 |
| 7G-1 | Dust strainer | 0.818 | 1 | 1 | 1 | 1 | 3425-057 |
| 7H-1 | Gasket for dust strainer dia. 326 x 8 | 0.074 | 1 | 1 | 1 | 1 | 2353-118 |
| 7J-1 | Hexagon head screw M5 x 10 | 0.002 | 8 | 8 | 8 | 8 | 1424-140 |
| 7K-1 | Lock washer dia. 10.5/5.3 x 0.6 | 0.002 | 8 | 8 | 8 | 8 | 1437-061 |
| Delivery oil pipe - internal | |||||||
| 9A-1 | Oil pipe CMO 24 | 0.294 | 1 | 3141-148 | |||
| 9A-2 | Oil pipe CMO 26 | 0.300 | 1 | 3141-149 | |||
| 9A-3 | Oil pipe CMO/TCMO 28 | 0.310 | 1 | 1 | 3141-150 | ||
| 9B-1 | O-ring dia. 13.5x2.62 | 0.003 | 4 | 4 | 4 | 4 | 1331-017 |
| 9C-1 | Thrust ring | 0.004 | 2 | 2 | 2 | 2 | 2353-020 |
| Shaft seal type SB CMO | |||||||
| Spare parts kit: | 1 | 1 | 1 | 1 | 3126-165-3 | ||
| Consist of: | |||||||
| 10A-1 | Slide ring, steel | 1 | 1 | 1 | 3126-162 | ||
| 10B-1 | Slide ring, carbon | 1 | 1 | 1 | 1 | 3126-158 | |
| 10C-1 | O-ring dia.53.57x 3.53 | 0.002 | 1 | 1 | 1 | 1 | 1331-068 |
| 10D-1 | O-ring dia. 63.09 x 3.53 | 0.004 | 1 | 1 | 1 | 1 | 1331-071 |
| 10G-1 | Hex. socket screw M5 x 16 | 0.004 | 4 | 4 | 4 | 4 | 1413-331 |
| Allen key NV-4x90x90 | 1 | 1 | 1 | 1 | 1612-392 | ||
| Mounting instruction | 0171-949 | ||||||
| Shaft seal complete for CMO/TCMO | 1 | 1 | 1 | 1 | 3126-180 | ||
| Consist of: | |||||||
| 8A-1 | Cover for shaft seal | 1 | 1 | 1 | 1 | 3113-170 | |
| 8B-1 | O-ring dia. 98.02 x 3.53 | 1 | 1 | 1 | 1 | 1331-081 | |
| 8C-1 | Hex. head screw M8 x 30 | 5 | 5 | 5 | 5 | 1424-169 | |
| 8D-1 | Spring washer dia. 14.2/8.2 x 2 | 5 | 5 | 5 | 5 | 1437-023 | |
| 8E-1 | Locking ring | 1 | 1 | 1 | 1 | 3126-164 | |
| 8F-1 | Cylindrical pin | 1 | 1 | 1 | 1 | 1446-081 | |
| 10A-1 | Slide ring, steel | 1 | 1 | 1 | 1 | 3126-162 | |
| 10B-1 | SirDe ring, carbon | 1 | 1 | 1 | 1 | 3126-158 | |
| 10C-1 | O-ring dia. 53.57 x 3.53 | 1 | 1 | 1 | 1 | 1331-068 | |
| 10D-1 | O-ring dia. 63.09x3.53 | 1 | 1 | 1 | 1 | 1331-071 | |
| 10F-1 | Retaining flange | 1 | 1 | 1 | 1 | 3126-161 | |
| 10G-1 | hex. socket screw M5 x 16 | 4 | 4 | 4 | 4 | 1413-331 | |
| 10H-1 | Locking ring | 1 | 1 | 1 | 1 | 3126-163 | |
| 10K-1 | Spring - DC5 x 32 x dia. 1 | 8 | 8 | 8 | 8 | 2142-058 | |
| OS pump | |||||||
| 11-1 | Oil pump complete *) | 1 | 1 | 1 | 1 | 3141-154 | |
| 11A-1 | Gasket pump housing/cover | 1 | 1 | 1 | 1 | 2353-170 | |
| 11B-1 | Socket cap screw M8 x 60 | 0.018 | 4 | 4 | 4 | 4 | 1413-364 |
| 11C-1 | Pump housing | 1 | 1 | 1 | 1 | ||
| 11D-1 | Cover for pump | 1 | 1 | 1 | 1 | ||
| 11E-1 | O-ring dia. 75.8 x 3.5 | 0.004 | 1 | 1 | 1 | 1 | 1331-075 |
| 11F-1 | Socket cap screw M6 x 16 | 0.006 | 4 | 4 | 4 | 4 | 1413-340 |
| 11G-1 | Cylindrical pin dia. 6 x 36 | 2 | 2 | 2 | 2 | 1445-061 | |
| 11J-1 | Gear wheel | 1 | 1 | 1 | 1 | ||
| 11K-1 | Gear wneei | 1 | 1 | 1 | 1 | ||
| 11L-1 | Grooved pin dia. 6 x 24 DIN 1475 | 1 | 1 | 1 | 1 | 1446-032 | |
| 11M-1 | Dog clutch | 1 | 1 | 1 | 1 | 2125-298 | |
| 11N-1 | Bushing for dog clutch - nylon | 2 | 2 | 2 | 2 | 2132-087 | |
| Unloading mechanism | |||||||
| 12-1 | Unloading mechanism complete | 4 | 4 | 8 | 4 | 3135-172 | |
| 12A-1 | Socket cap screw M5 x 20 | 0.004 | 8 | 12 | 16 | 8 | 1413-332 |
| 12B-1 | Spring washer | 0.002 | 8 | 12 | 13 | 8 | 1437-061 |
| 12C-1 | Bottom part | 4 | 6 | 8 | 4 | 3135-163 | |
| 12D-1 | Unloading piston | 4 | 6 | 8 | 4 | 3135-169 | |
| 12E-1 | Unloading cylinder | 4 | 6 | 8 | 4 | 3135-170 | |
| 12F-1 | Spring | 64 | 84 | 128 | 64 | 2142-052 | |
| 12G-1 | Sealing ring | 4 | 6 | 8 | 4 | 1332-113 | |
| 12H-1 | Sealing ring | 4 | 6 | 8 | 4 | 1332-114 | |
| 12J-1 | Locking ring | 4 | 6 | 8 | 4 | 3135-171 | |
| *) If the oil pump is fault, the entire pump must be replaced | |||||||
| Crank shaft | |||||||
| 16-1 | Crank shaft CMO 24 complete | 1 | 3121-195 | ||||
| 16-2 | Crank shaft CMO 26 complete | 1 | 3121-196 | ||||
| 16-3 | Crank shaft CMO/TCMO 28 | 1 | 1 | 3121-197 | |||
| 16C-1 | Key 14 x 9 x 40 | 0.034 | 1 | 1 | 1 | 1 | 2123-003 |
| 16D-1 | Pjainwasher | 0.245 | 1 | 1 | 1 | 1 | 2125-040 |
| 16E-1 | Hexagon head screw M14 x 40 | 0.070 | 1 | 1 | 1 | 1 | 1424-141 |
| 16F-1 | Spring washer dia. 23/14x3 | 0.006 | 1 | 1 | 1 | 1 | 1437-030 |
| 16G-1 | Spray ring | 0.004 | 1 | 1 | 1 | 1 | 1437-290 |
| 16H-1 | Plug | 0.002 | 3 | 3 | 3 | 3 | 1413-250 |
| 16J-1 | Grooved pin DIN 1474 | 0.015 | 2 | 2 | 2 | 2 | 1446-031 |
| Connecting rod -for CMO and TCMO LP | |||||||
| 17-1 | Connecting rod complete with bolts | 4 | 6 | 8 | 6 | 3123-076 | |
| 17-2 | Connecting rod complete undersize | 4 | 6 | 8 | 6 | 3123-078 | |
| 17C-1 | Bolt for connecting rod | 0.030 | 8 | 12 | 16 | 12 | 2111-004 |
| 17H-1 | Self locking nut UNF 5/16" | 0.006 | 8 | 12 | 16 | 12 | 1433-115 |
| 17J-1 | Chamfered washer dia. 17/8.4 x 1.6 | 0.008 | 8 | 12 | 16 | 12 | 1436-034 |
| Connecting rod -for TCMO HP needle bearing | |||||||
| 17-3 | Connecting rod complete wrth bolts | 2 | 3123-077 | ||||
| 17-4 | Connectino rod complete undersize | 2 | 3123-079 | ||||
| 17C-1 | Bolts for connection rod | 0.030 | 4 | 2111-004 | |||
| 17H-1 | Self locking nut UNF 5/16" | 0.006 | 4 | 1433-115 | |||
| 17J-1 | Chamfered washer dia. 17/8.4 x 1.6 | 0.008 | 4 | 1436-034 | |||
| 17K-1 | Needle bearing | 2 | 1511-272 | ||||
| Piston | |||||||
| 18-1 | Piston with pin and rings | 4 | 6 | 8 | 8 | 3124-062 | |
| 18A-1 | Piston pin | 4 | 6 | 8 | 8 | 3125-122 | |
| 18C-1 | Piston ring | 4 | 6 | 8 | 8 | 3125-129 | |
| 18D-1 | Oil scraper ring | 4 | 6 | 8 | 8 | 3125-124 | |
| 18E-1 | Circlip for bore dia. 22 | 8 | 12 | 16 | 16 | 1437-138 | |
| Cylinder liner with suction valve - See drawing 0662-212 | |||||||
| 19-1 | Cylinder liner complete - CMO and TCMO LP- R717 for capacity regulation | 4 | 6 | 3 | 4 | 3112-077 | |
| 19-2 | Cylinder liner complete- TCMO LP/HP- R717 without capacity regulation | 4 | 3112-079 | ||||
| 19-4 | Cylinder liner complete- CMO and TCMO LP- HFC for capacity regulation | 4 | 6 | 8 | 4 | 3112-076 | |
| 19-5 | Cylinder liner complete- TCMO LP/HP-HFC/HCFC without capacity regulation | 4 | 3112-078 | ||||
| 19A-1 | Cylinder liners LP/HP -R717/HFC/HCFC | 4 | 6 | 8 | 8 | 3112-075 | |
| 19B-1 | Unloading pin | 24 | 36 | 48 | 36 | 2122-023 | |
| 19C-1 | Spring for unfoadng pin | 24 | 36 | 48 | 36 | 2142-034 | |
| 19F-1 | Ring plate for suction valve | 4 | 6 | 8 | 8 | 3131-072 | |
| 19G-1 | Valve spring | 16 | 24 | 32 | 32 | 2141-047 | |
| 19H-1 | Suction valve retaining plate R717 | 4 | 6 | 8 | 8 | 3132-075 | |
| 19H-2 | Suction valve retaining plate HFC | 4 | 6 | 8 | 8 | 3132-073 | |
| 19J-1 | Socket cap screw M5 x 25 | 24 | 36 | 48 | 48 | 1413-333 | |
| 19K-1 | Gasket 0.5 mm | 4 | 6 | 8 | 8 | 2356-288 | |
| 19K-2 | Gasket 0.8 mm | 4 | 6 | 8 | 8 | 2356-289 | |
| 19M-1 | O-ring dia. 72.69 x 2.62 | 2 | 1331-147 | ||||
| Discharge valve | |||||||
| 20-1 | Discharge valve complete R717 | 4 | 6 | 8 | 8 | 3136-080 | |
| 20-2 | Discharge valve complete HFC/HCFC | 4 | 6 | 8 | 8 | 3136-079 | |
| 20A-1 | Valve seat | 4 | 6 | 8 | 8 | 3133-008 | |
| 20B-1 | Valve retaining plate R717 | 4 | 6 | 8 | 8 | 3132-074 | |
| 20B-2 | Valve retaining plate HFC/HCFC | 4 | 6 | 8 | 8 | 3132-072 | |
| 20C-1 | Ring plate for discharge valve | 4 | 6 | 8 | 8 | 3131-006 | |
| 20D-1 | Counter sunk screw M8 x 40 | 4 | 6 | 8 | 8 | 1413-106 | |
| 20E-1 | Nut M8 | 8 | 12 | 16 | 16 | 1432-063 | |
| 20F-1 | Spring guide | 4 | 6 | 8 | 8 | 2145-011 | |
| 20H-1 | Valve spring | 24 | 36 | 48 | 48 | 2141-047 | |
| 20J-1 | Spring washer | 4 | 6 | 8 | 8 | 1437-054 | |
| Spring for safety head | |||||||
| 21 | Spring | 4 | 5 | 8 | 8 | 2142-059 | |
| Oil pressure valve | |||||||
| 21-1 | Oil pressure valve - complete | 0.450 | 1 | 1 | 1 | 1 | 3142-150 |
| 22A-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2354-075 |
| Oil charging valve for HFC/HCFC refrigerator | |||||||
| 23-1 | Oil charging valve | 0.300 | 1 | 1 | 1 | 1 | 1374-132 |
| 23A-1 | Union nut 3/4" flare | 0.005 | 1 | 1 | 1 | 1 | 1376-012 |
| 23B-1 | Seal cap 1/2" | 0.002 | 1 | 1 | 1 | 1 | 1376-042 |
| 23C-1 | Bushing G 3/4" x G 3/8" | 0.140 | 1 | 1 | 1 | 1 | 2312-007 |
| 23D-1 | Gasket dia. 34/27x1.5 | 0.001 | 1 | 1 | 1 | 1 | 2356-140 |
| for B717 refrigerator | |||||||
| 23A-2 | Oil charging valve - complete | 0.300 | 1 | 1 | 1 | 1 | 2412-585 |
| 23B-2 | Threaded reducing nipple | 0.155 | 1 | 1 | 1 | 1 | 2311-059 |
| 23C-2 | Socket | 0.075 | 1 | 1 | 1 | 1 | 2313-035 |
| 23D-2 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-123 |
| 23E-2 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-140 |
| 23F-2 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-283 |
| 23G-2 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
| By-pass valve | |||||||
| 24-1 | By-pass valve dia. 20 24 bar | 2.400 | 1 | 1 | 1 | 3137-011 | |
| 24-2 | By-pass valve dia. 20 22 bar | 2.400 | 1 | 1 | 1 | 3137-012 | |
| 24-3 | By-pass valve dia. 10 24 bar | 0.850 | 1 | 3137-013 | |||
| 24-4 | By-pass valve dia. 10 22 bar | 0.850 | 1 | 3137-034 | |||
| 24C-1 | O-ring for cylinder dia. 44.05 x 3.5 | 0.006 | 1 | 1 | 1 | 1331-065 | |
| 24C-4 | O-ring for cylinder dia. 25.07 x 2.5 | 0.004 | 1 | 1331-131 | |||
| 24E-1 | O-ring for cover dia. 56,75 x 3,5 | 0.006 | 1 | 1 | 1 | 1331-069 | |
| 24 E-4 | O-ring for cover dia. 32.99 x 2.6 | 0.004 | 1 | 1331-133 | |||
| 24G-1 | Hexagon head screw M6 x 25 | 0.006 | 5 | 5 | 5 | 1424-153 | |
| 24G-4 | Hexagon head screw M4 x 16 | 0.002 | 5 | 1424-135 | |||
| 24H-1 | Spring washer dia. 11.1/6.1 x 1.6 | 0.002 | 5 | 5 | 5 | 1437-022 | |
| 24H-4 | Spring washer dia. 7.1/4.1 x0.9 | 0.001 | 5 | 1437-020 | |||
| Pos. | Designation | Valve dim. dia. | Weight each in kg | Number each valve | Part no. | ||
| Slop valve | |||||||
| 25-1 | Complete valve - discharge | 40 | 1 | 2414-066 | |||
| 25-2 | complete valve - suctron | 50 | 1 | 2414-067 | |||
| 25A-1 | Valve housing | 40 | 1 | 2432-156 | |||
| 25A-2 | Valve housing | 50 | 1 | 2432-157 | |||
| 25B-1 | Valve bonnet | 40-50 | 1.760 | 1 | 2433-028 | ||
| 25C-1 | Front part tor cone | 40-50 | 0.098 | 1 | 2444-090 | ||
| 25D-1 | Rear part for cone | 40-50 | 0.180 | 1 | 2444-091 | ||
| 25E-1 | Screw for cone | 40-50 | 0.054 | 1 | 2444-017 | ||
| 25F-1 | Gasket for scraw | 40-50 | 0.002 | 1 | 2356-138 | ||
| 25G-1 | Threaded connection | 40-50 | 0.180 | 1 | 2445-053 | ||
| 25H-1 | Sealing ring dia. 62/45 x 3 | 40-50 | 0.010 | 1 | 2354-003 | ||
| 25J-1 | O-ring for bonnet dia. 72.4 x 5.3 | 40-50 | 0.010 | 1 | 1331-154 | ||
| 25K-1 | Spindle | 40-50 | 0.234 | 1 | 2442-023 | ||
| 25L-1 | Lock washer | 40-50 | 0.010 | 1 | 2445-019 | ||
| 25M-1 | Packing gland complete with o-rings | 40-50 | 0.152 | 1 | 2452-132 | ||
| 25N-1 | Guide pin Dia.sx 10 | 40-50 | 0.002 | 1 | 1446-085 | ||
| 25P-1 | O-ring dia. 21.8x3.5 | 40-50 | 0.002 | 1 | 1331-020 | ||
| 25Q-1 | Nylon washer dia. 39,5/28 x 1.5 | 40-50 | 0.002 | 1 | 2354-018 | ||
| 25R-1 | O-ring dia. 17,12x3,5 | 40-50 | 0.002 | 2 | 1331-016 | ||
| 25S-1 | Hand wheel d] a. 120 | 40-50 | 0.164 | 1 | 1365-036 | ||
| 25T-1 | Screw ior hand wheel | 40-50 | 0.002 | 1 | 1424-140 | ||
| 25U-1 | Washer for hand wheel | 40-50 | 0.004 | 1 | 1436-024 | ||
| 25Y-1 | Gasket for welding nipple | 40-50 | 0.008 | 1 | 2356-087 | ||
| 25Z-1 | Screw valve/corn pres&or Ml 2 it 130 | 40 | 0.116 | 4 | 1424-072 | ||
| 25Z-2 | Screw valve/compressor M14 x 130 | 50 | 0.160 | 4 | 1424-091 | ||
| 25AC-1 | Counter flange | 40-50 | 1.162 | 6 | 2344-091 | ||
| 25AD-1 | Welding nipple dia. 40 | 0.992 | 6 | 2322-100 | |||
| 25AD-2 | Welding nipple dia. 50 | 0.856 | 6 | 2322-102 | |||
| 25AD-3 | Welding nipple dia. 65 | 0.838 | 6 | 2322-103 | |||
| 25AG-1 | Gasket valve/compressor | 40 | 0.014 | 6 | 2356-212 | ||
| 25AG-2 | Gasket valve/compressor | 50 | 0.018 | 6 | 2356-213 | ||
| 25AJ-1 | Screw bonnet/valve Ml 0 x 25 | 40-50 | 0.024 | 8 | 1424-191 | ||
| 25AK-1 | Screw tor counter flange M10 x 40 | 40-50 | 0.032 | 6 | 1424-194 | ||
| Pos. | Designation | Weight each in kg | Number each compressor | Part no. | |||
| CMO 24 | CMO 26 | CMO 28 | TCMO 28 | ||||
| Suction and oil pressure gauge | |||||||
| 30-1 | R12/R22 bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-251 |
| 30-2 | R502 bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-365 |
| 30-3 | R717 bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-109 |
| 30-4 | R134a/R404a bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-071 |
| Discharge pressure gauge | |||||||
| 31-1 | R12/R22bar and °C HP | 0.700 | 1 | 1 | 1 | 1541-191 | |
| 31-2 | R12/R22 bar and °C IP-HP | 0.700 | 1 | 1541-278 | |||
| 31-3 | R502 bar and °C HP | 0.700 | 1 | 1 | 1 | 1541-364 | |
| 31-4 | R502 bar and °C IP-HP | 0.700 | 1 | 1541-366 | |||
| 31-5 | R717 bar and °C C HP | 0.700 | 1 | 1 | 1 | 1541-050 | |
| 31-6 | R717 bar and °C IP-HP | 0.700 | 1 | 1541-103 | |||
| 31-7 | R134a/R404a bar and °C HP | 0.700 | 1 | 1 | 1 | 1541-072 | |
| 31-8 | R134a/R404a bar and °C IP-HP | 0.700 | 1 | 1541-073 | |||
| Bracket for gauge | |||||||
| 39-1 | Bracket | 1.000 | 1 | 1 | 1 | 1 | 3146-015 |
| 39A-1 | Hexagon head screw M5 x 6 | 0.002 | 4 | 4 | 4 | 4 | 1424-140 |
| 39B-1 | Spring washer | 0.002 | 4 | 4 | 4 | 4 | 1437-061 |
| Cooling water connections | |||||||
| 40A-1 | Set of hoses for cooling water 4 cyl. | 1 | 3185-108 | ||||
| 40A-2 | Set of hoses tor cooling water 6 cyl. | 1 | 3185-109 | ||||
| 40A-3 | Set of hoses for cooling water 8 cyl. | 1 | 1 | 3185-110 | |||
| 40B-1 | Hose of connection 3/8" - straight | 0.004 | 10 | 12 | 14 | 14 | 2334-025 |
| 40C-1 | Angle - 3/8" | 0.009 | 6 | 8 | 8 | 8 | 1341-090 |
| 40D-1 | T-piece | 0.015 | 2 | 2 | 2 | 2 | 1341-141 |
| 40C-1 | Hose clamp | 0.015 | 10 | 12 | 14 | 14 | 1345-16S |
| 40F-1 | Cable binder | 3 | 3 | 3 | 3 | 1554-062 | |
| Parts for instruments | |||||||
| 41A-1 | Gasket dia. 19/14x1.5 | 0.001 | 6 | 6 | 6 | 8 | 2356-124 |
| 41B-1 | Connecting piece - 2 pipes | 0.025 | 2 | 2 | 2 | 2 | 2333-012 |
| 41C-1 | Plug tor connecting piece | 0.040 | 3 | 3 | 3 | 4 | 2314-048 |
| 41D-1 | Union nut - R12 - R22 - R502 | 0.003 | 5 | 5 | 5 | 6 | 1376-010 |
| 41E-1 | Union nut M10x 0.75- R717 | 0.010 | 5 | 5 | 5 | 6 | 1349-011 |
| 41F-1 | Gasket dia. 9/3 x 1 -R717 | 0.001 | 5 | 5 | 5 | 6 | 2356-117 |
| 41H-1 | Gasket dia. 14.5/6x1.5 | 0.001 | 2 | 2 | 2 | 2 | 2356-120 |
| 41J-1 | Connecting piece -1 pipe | 0.015 | 1 | 2333-014 | |||
| 41Q-1 | Pipe holder | 0.004 | 1 | 1 | 1 | 1 | 1377-096 |
| 41P-1 | Cylinder head screw M4 x 6 | 0.002 | 1 | 1 | 1 | 1 | 1412-200 |
| 41T-1 | Pipe section with tlare | 0.006 | 7 | 7 | 7 | 7 | 2333-016 |
| 41U-1 | Connecting piece - 3 pipes | 0.017 | 1 | 1 | 1 | 1 | 2333-013 |
| Purge valve | |||||||
| 42A-1 | Purge valve complete | 0.300 | 1 | 1 | 1 | 1 | 2412-585 |
| 42B-1 | Threaded nipple | ||||||
| 42C-1 | Cutting ring | 0.135 | 1 | 1 | 1 | 1 | 1349-062 |
| 42D-1 | Nut | ||||||
| 42E-1 | Nut | 0.070 | 1 | 1 | 1 | 1 | 2313-045 |
| 42F-1 | Connection pipe with collar | 0.025 | 1 | 1 | 1 | 1 | 2334-027 |
| 42G-1 | Gasket | 0.001 | 2 | 2 | 2 | 2 | 2356-123 |
| 42H-1 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
| Parts for mounting pressure control | |||||||
| 44A-1 | Bracket for pressure controls | 1 | 1 | 1 | 1 | 2213-409 | |
| 44B-1 | Counter sunk screw M6 x 12 | 0.020 | 2 | 2 | 2 | 2 | 1413-090 |
| 44C-1 | Bracket for KP77 or KP1 | 1 | 1 | 1 | 1 | 2213-411 | |
| 44D-1 | Bracket for KP98 | 1 | 1 | 1 | 1 | 2213-410 | |
| 44E-1 | Socket cap screw M6 x 12 | 0.004 | 4 | 4 | 4 | 4 | 1413-339 |
| 44F-1 | Spring washer | 0.006 | 4 | 4 | 4 | 4 | 1437-022 |
| 44G-1 | Cylinder head screw M4 x 6 | 0.002 | 8 | 8 | 8 | 8 | 1412-200 |
| 44M-1 | Spring washer dia. 7.1/4 x 1 | 0.002 | 8 | 8 | 8 | 8 | 1437-020 |
| Pressure controls for HFC/HCFC | |||||||
| 45A-1 | Pressure control KP15 A | 0.533 | 1 | 1 | 1 | 1 | 1373-135 |
| 45B-1 | Differential pressure control MP55 | 0.864 | 1 | 1 | 1 | 1 | 1373-159 |
| ForR717 | |||||||
| 45A-2 | Pressure control KP15 A | 0.754 | 1 | 1 | 1 | 1 | 1373-142 |
| 45B-2 | Dffferentiai pressure KontroF MP55 A | 0.978 | 1 | 1 | 1 | 1 | 1373-162 |
| Temperature controls | |||||||
| 46A-1 | Temperature control KP77 | 0.466 | 1 | 1 | 1 | 1 | 1373-044 |
| 46B-1 | Temperature control KP98 | 0.674 | 1 | 1 | 1 | 1 | 1373-043 |
| 46C-1 | Phil pocket for temperature control | 0.162 | 3 | 3 | 3 | 3 | 1377-171 |
| 46D | Gasket for phil pocket dia. 27/21x1.5 | 0.008 | 3 | 3 | 3 | 3 | 2356-133 |
| Coupling | |||||||
| 48A-1 | Disc pack | 0.282 | 2 | 2 | 2 | 2 | 1524-155 |
| 48B-1 | Bolt | 0.054 | 16 | 16 | 16 | 16 | 1524-163 |
| 48C-1 | Level washer | 0.004 | 16 | 16 | 16 | 16 | 1524-179 |
| 48D-1 | Lock nut | 0.005 | 16 | 16 | 16 | 16 | 1524-171 |
| Crankcase healer | |||||||
| 57A-4 | Crankcase heater 270W.115V.G1 1/4 | 1 | 1 | 1 | 1 | 3181-034-01 | |
| 57A-5 | Crankcase heater 270W, 230V, G 1 1/4 | 1 | 1 | 1 | 1 | 3181-035-01 | |
| 57A-6 | Crankcase healer 270W, 250V, G 1 1/4 | 1 | 1 | 1 | 1 | 3181-036-01 | |
| 57B-2 | Seating ring dia. 42/49 x 6.5 | 0.022 | 1 | 1 | 1 | 1 | 1349-213 |
| Bracket for oil filter | |||||||
| 59A-1 | Bracket for oil filter | 1 | 1 | 1 | 1 | 3421-081 | |
| 59B-1 | Socket screw M8 x 35 | 0.018 | 2 | 2 | 2 | 2 | 1413-359 |
| 59C-1 | Gasket for bracket | 1 | 1 | 1 | 1 | 2353-171 | |
| 59D-1 | Plug | 1 | 1 | 1 | 1 | 1413-265 | |
| Oil filter | |||||||
| 60A | Filter element | 1 | 1 | 1 | 1 | 1517-124 | |
| 60B | Gasket tor filter | 1 | 1 | 1 | 1 | 1334-025 | |
| 60H | Washer dia. 19/8.2x6 | 1 | 1 | 1 | 1 | 2114-036 | |
| 60J | Iron ring | 3 | 3 | 3 | 3 | 2114-038 | |
| 60K | Magnets | 3 | 3 | 3 | 3 | 1517-022 | |
| 60L | Rod for magnets | 1 | 1 | 1 | 1 | 2112-156 | |
| 60M | Rubber ring | 1 | 1 | 1 | 1 | 1334-012 | |
| 60N | Washer | 1 | 1 | 1 | 1 | 1436-034 | |
| 60P | Locking nut | 2 | 2 | 2 | 2 | 1433-073 | |
| Oil pipes for unloading mechanism | |||||||
| CMO-24 | |||||||
| 62A-1 | Pipe set | 0.200 | 1 | 3143-292 | |||
| CMO 26 | |||||||
| 62A-2 | Pipe set | 0.114 | 1 | 3143-291 | |||
| CMO 28 | |||||||
| 62A-3 | Pipe set | 0.108 | 1 | 3143-290 | |||
| TCMO 28 | |||||||
| 62A-4 | Pipe set | 0.108 | 1 | 3143-293 | |||
| Joint for oil pipes | |||||||
| 62F | Spirolox-ring RS 50 | 0.002 | 4 | 4 | 4 | 4 | 1437-275 |
| 62G | O-ring dia. 9.25 x 1.78 | 0.001 | 4 | 4 | 4 | 4 | 1331-010 |
| 62 H | O-ring 7.65 x 1.78 | 0.001 | 4 | 6 | 8 | 4 | 1331-009 |
| Oil separator CMO 2 - HFC/HCFC | |||||||
| 65-1 | Oil separator - complete | 1 | 1 | 1 | 4241-208 | ||
| 65A-1 | Housing | 1 | 1 | 1 | 4241-207 | ||
| 65B-1 | Demister | 1 | 1 | 1 | 1375-288 | ||
| 65C-1 | End cover | 1 | 1 | 1 | 3422-114 | ||
| 65D-1 | O-ring for 65C | 1 | 1 | 1 | 1331-089 | ||
| 65E-1 | Hexagon head screw M16 x 45 | 4 | 4 | 4 | 1424-102 | ||
| 65F-1 | Spring washer | 4 | 4 | 4 | 1437-057 | ||
| 65G-1 | Gasket against compr. dia. 100/62x1,5 | 1 | 1 | 1 | 2353-212 | ||
| 65H-1 | Hexagon head screw M12 x 40 | 4 | 4 | 4 | 1424-217 | ||
| 65J-1 | Stop valve complete | 1 | 1 | 1 | 2414-066 | ||
| 65K-1 | Gasket tor stop valve dia. 100/62x1.5 | 1 | 1 | 1 | 2356-212 | ||
| 65L-1 | Hexagon head screw M12 x 120 | 4 | 4 | 4 | 1424-069 | ||
| Oil separator CMO 2 - R717 | |||||||
| 65-2 | Oil separator - complete | 1 | 1 | 1 | 4241-230 | ||
| 65G-2 | Gasket against compr. dia. 100/62x1,5 | 1 | 1 | 1 | 2356-212 | ||
| 65H-2 | Hexagon head screw M12 x 40 | 4 | 4 | 4 | 1424-217 | ||
| 65J-2 | Stop valve SCV 400 111 | 1 | 1 | 1 | 2411-840 | ||
| Oil separator TCMO 2 - R717- HFC/HCFC | |||||||
| 65-3 | Oil separator - complete | 1 | 4241-233 | ||||
| 65A-3 | Housing | 1 | 4241-232 | ||||
| 65 B-3 | Demister | 1 | 1375-295 | ||||
| 65C-3 | End cover | 1 | 3254-315 | ||||
| 65D-3 | O-ring dia. 91.97x3.5 | 0.004 | 1 | 1331-080 | |||
| 65E-3 | Hexagon head screw M12 x 35 | 0.042 | 4 | 1424-216 | |||
| 65F-3 | Spring washer | 0.004 | 4 | 1437-081 | |||
| 65G-3 | Gasket against compr. dia. 100/62x1,5 | 1 | 2356-212 | ||||
| 65H-3 | Hexagon head Screw.m12 x 40 | 0.046 | 1 | 1424-217 | |||
| 65J-3 | Slop valve complete | 1 | 2414-066 | ||||
| 65K-3 | Gasket for stop valve dia. 100/62x1.5 | 0.014 | 1 | 2356-212 | |||
| 65L-3 | Hexagon head screw M12 x 120 | 0.116 | 1 | 1424-069 | |||
| Extra suction filter - only delivered on demand | |||||||
| 66-1 | Extra suction filter complete | 1 | 1 | 1 | 1 | 4521-030 | |
| 66A-1 | Filter housing | 1 | 1 | 1 | 1 | 3421-053 | |
| 66B-1 | End cover | 2.310 | 1 | 1 | 1 | 1 | 3422-103 |
| 66C-1 | O-ring dia.91.67x3.53 | 0.004 | 1 | 1 | 1 | 1 | 1331-080 |
| 66D-1 | Hexagon head screw M 12 x 40 | 0.046 | 4 | 4 | 4 | 4 | 1424-217 |
| 66E-1 | Spring washer dia. 20.2/12.2 x 2.5 | 0.004 | 4 | 4 | 4 | 4 | 1437-081 |
| 66F-1 | Strainer tilter | 0.374 | 1 | 1 | 1 | 1 | 3425-082 |
| 66G-1 | Filter bag | 0.028 | 1 | 1 | 1 | 1 | 3425-083 |
| 66H-1 | Insert tor tilter bag | 0.032 | 1 | 1 | 1 | 1 | 3424-058 |
| 66J-1 | O-ring dia. 75.56 x 5.33 | 0.004 | 1 | 1 | 1 | 1 | 1331-042 |
| 66K-1 | Hexagon head screw M 14 x 45 | 0.070 | 4 | 4 | 4 | 1 | 1424-242 |
| 66L-1 | Gasket against compr. dia. 112/70x1.5 | 0.018 | 1 | 1 | 1 | 1 | 2356-213 |
| Oil cooler R717 | |||||||
| 76A-1 | Angla swivel screw-joint dia. 3/8"/12 | 0.180 | 1 | 1 | 1 | 1 | 1349-325 |
| 76B-1 | Bushing G 3/4" x G 3/8" | 2 | 2 | 2 | 2 | 2312-022 | |
| 76C-1 | Gasket dia. 32/27x1.5 | 0.008 | 2 | 2 | 2 | 2 | 2356-139 |
| 76D-1 | Straight swivel-in joint | 0.070 | 2 | 2 | 2 | 2 | 1349-053 |
| 76E-1 | Angle swivel screw-in joint | 0.170 | 1 | 1 | 1 | 1 | 1349-325 |
| 76F-1 | Straight screw-in joint | 0.058 | 1 | 1 | 1 | 1 | 1349-054 |
| Oil cooler HFC/HCFC | |||||||
| 76A-2 | Angle swivel screw-joint dia. 3/8"/10 | 0.178 | 1 | 1 | 1 | 1 | 1349-324 |
| 76B-2 | Bushing 03/4" x G 3/8" | 2 | 2 | 2 | 2 | 2312-022 | |
| 76C-2 | Gasket dia. 32/27 x 1.5 | 0.008 | 2 | 2 | 2 | 2 | 2356-139 |
| 76D-2 | Straight screw-in joint | 0.070 | 2 | 2 | 2 | 2 | 1349-053 |
| 76 E-2 | Angle swivel screw-in joint | 0.170 | 1 | 1 | 1 | 1 | 1349-325 |
| 76F-2 | Angle swivel screw-in joint | 0.170 | 1 | 1 | 1 | 1 | 1349-325 |
| 80 | Solenoide valve blok, complete with 0.6 mm orifice for oil return, coil | 2.040 | 1 | 1 | 1 | 1 or 2 | 1372-179 |
| Strainer kit consider of: | 1 | 1 | 1 | 1or2 | 1372-089 | ||
| 80E | Strainer | ||||||
| 80G | Al-gasket | ||||||
| Service hit consider of: | 1 | 1 | 1 | 1 or 2 | 1372-086 | ||
| 80P | Armature tube | ||||||
| 80H | Armature | ||||||
| 80K | O-ring | ||||||
| 80M | O-ring | ||||||
| 80L | Al-gasket | ||||||
| 80N | Snap fastener | ||||||
| Seal kit consider of: | 1 | 1 | 1 | 1 or 2 | 1372-091 | ||
| 80G | Al-gasket | ||||||
| 80K | 0-RING | ||||||
| 80M | 0-RING | ||||||
| 80L | Al-gasket | ||||||
| 80Q | Al-gasket | ||||||
| Orifice kit 0.6 mm consider of: | 1 | 1 | 1 | 1 or 2 | 1371-034 | ||
| 80L | Al-gasket | ||||||
| 80Q | Al-gasket | ||||||
| 80I | Orifice 6 mm | ||||||
| Orifice kit 0.8 mm consider of: | 1 | 1 | 1 | 1 or 2 | 1371-035 | ||
| 80L | Al-gasket | ||||||
| 80Q | Al-gasket | ||||||
| 80I | Orifice 8 mm | ||||||
| Orifice kit 1.0 mm consider of: | 1 | 1 | 1 | 1 or2 | 1371-036 | ||
| 80L | Al-gasket | ||||||
| 80Q | Al-gasket | ||||||
| 80I | Orifice 1.0 mm | ||||||
| Orifice kit 3.3 mm (tor thermopump only) consider of: | 1 | 1 | 1 | 1 or 2 | 1371-037 | ||
| 80L | Al-gasket | ||||||
| 80Q | Al-gasket | ||||||
| 80I | Orifice 3.3 mm | ||||||
| 80J-1 | Goil 220/230V 50/60 Hz, 10W | 0.285 | 1372-537 | ||||
| 80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | ||||
| 80J-3 | Coil 240V, 50 Hz,10W | 0.285 | 1372-539 | ||||
| 80J-4 | Cofl24V, 50 Hz, 10 W | 0.285 | 1372-541 | ||||
| Injection system for TCMO | |||||||
| Only for TCMO with int. IP system | |||||||
| 83A-1 | Guard | 0.968 | 1 | 3116-048 | |||
| 83B-1 | Nipple | 0.156 | 1 | 3116-041 | |||
| 83C-1 | O-ring dia. 25 x 3.5 tor 83B | 0.012 | 1 | 1331-022 | |||
| 83D-1 | O-ring dia. 20.2 x 3.5 for 83B | 0.009 | 1 | 1331-019 | |||
| 83E-1 | Socket cap screw M6 x 16 | 0.006 | 2 | 1413-340 | |||
| 83F-1 | Spring washer 11.1/6.1 x 1.6 | 0.004 | 2 | 1437-022 | |||
| 83G-1 | Stop valve DN 20 witn oval flange | 1.800 | 1 | 2412-016 | |||
| 83H-1 | Gasket tor stop valve dia. 44/33 x 1.5 | 0.002 | 1 | 2356-039 | |||
| 83J-1 | Hexagon head screw M12 x 40 | 0.045 | 2 | 1424-217 | |||
| 83K-1 | Stop valve SG 6 | 0.540 | 1 | 2413-123 | |||
| 83L-1 | Gasket for valve DjA. 18/10 x 1.5 | 0.006 | 2 | 2356-123 | |||
| 83M-1 | Filter complete | 1 | 4522-007 | ||||
| 83M-2 | Insert for tiller | 1 | 3425-097 | ||||
| 83N-1 | Solenoid valve without coil | 0.688 | 1 | 1372-423 | |||
| 83S-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1372-537 | ||||
| 83S-2 | Coil 110V, 50/60Hz. 10W | 0.260 | 1372-538 | ||||
| 83S-3 | Coil 240V,50Hz, 10W | 0.260 | 1372-539 | ||||
| 83P-1 | Injection valve TEAT 20-5 - R22 | 2.460 | 1 | 1371-242 | |||
| 83P-2 | Injection valve TEAT 20-5 - R717 | 2.460 | 1 | 1371-240 | |||
| Spec. spring for 83P-2 | 0.018 | 1 | 1523-070 | ||||
| 83Q-1 | Soienoid vatve for by-pass, without coil | 0.822 | 1 | 1372-423 | |||
| 83T-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1372-537 | ||||
| 83T-2 | Coil 11CV, 50/60Hz, 10W | 0.260 | 1372-538 | ||||
| 83T-3 | Coil 240V, MHz, 10W | 0.260 | 1372-539 | ||||
| 83R-1 | Non-return valve for discharge pipe | 2.958 | 1 | 1372-249 | |||
| Side cover with solenoid valves for capacity control | |||||||
| 86A-1 | Side cover with oil level glass | 10.760 | 1 | 1 | 1 | 1 | 3113-134 |
| 86B-1 | Gasket for side cover | 0.014 | 1 | 1 | 1 | 1 | 2353-102 |
| 86C-1 | Hexagon head screw M12 x 65 | 0.070 | 10 | 10 | 10 | 10 | 1424-059 |
| 86D-1 | Hexagon head screw M12 x 75 | 0.078 | 2 | 2 | 2 | 2 | 1424-061 |
| 86E-1 | Oil level gfass | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
| 86F-1 | O-ring for oil level glass, dia.52.07 x 2.62 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
| 86G-1 | Hexagon head screw M6 x 18 | 0.006 | 4 | 4 | 4 | 4 | 1424-148 |
| 86H-1 | Valve body with 3 solenoid valves, without coils | 3.690 | 1 | 1 | 1 | 1 | 3143-413 |
| 86X-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1373-537 | ||||
| 86X-2 | Coil 110V,50/Qohz, 1CW | 0.260 | 1372-538 | ||||
| 86X-3 | Coil 240V. 50Hz, 10W | 0.260 | 1372-539 | ||||
| 86Y | Solenoid valve- Service lot for one solenoid valve | 3.690 | 1372-424 | ||||
| 86J-1 | Gasket tor valve body | 0.010 | 1 | 1 | 1 | 1 | 2353-150 |
| 86J-2 | Gasket for valve body for ex-exeiution | 0.010 | 1 | 1 | 1 | 1 | 2353-188 |
| 86K-1 | Hexagon head screw M8 x 70 | 0.030 | 4 | 4 | 4 | 4 | 1424-042 |
| 86N-1 | Washer dia. 24/13x2.5 | 0.006 | 12 | 13 | 12 | 12 | 1436-036 |
| 86P-1 | Plug connector for coils | 3 | 3 | 3 | 3 | 1372-545 | |
| 86Q-1 | Valve for prelubrication | 1 | 1 | 1 | 1 | 2412-585 | |
| 86R-1 | Nut | 1 | 1 | 1 | 1 | 2313-045 | |
| 86S-1 | Special joint | 1 | 1 | 1 | 1 | 2334-027 | |
| 86T-1 | Cap | 1 | 1 | 1 | 1 | 2313-027 | |
| 86U-1 | Joint 3/8" | 1 | 1 | 1 | 1 | 1349-053 | |
| 86V-1 | Alu-gasket | 1 | 1 | 1 | 1 | 2355-123 | |
| Side cover for unloading start | |||||||
| 87A-1 | Side cover with oil level glas | 10.760 | 1 | 1 | 1 | 1 | 3113-134 |
| 87B-1 | Gasket for side cover | 0.014 | 1 | 1 | 1 | 1 | 2353-102 |
| 87C-1 | Hexagon head screw M12 x 6 | 0.070 | 10 | 10 | 10 | 10 | 1424-059 |
| 87D-1 | Hexagon head screw M12 x 75 | 0.078 | 2 | 2 | 2 | 2 | 1424-061 |
| 87E-1 | Oil level glas | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
| 87F-1 | O-ring dia. 52.07x2.52 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
| 87G-1 | Hexagon head screw M6 x 18 | 0.006 | 4 | 4 | 4 | 4 | 1424-149 |
| 87K-1 | Cover for unloading start | 0.805 | 1 | 1 | 1 | 1 | 3143-187 |
| 87L-1 | Gasket for cover | 0.008 | 1 | 1 | 1 | 1 | 2353-149 |
| 87M-1 | Hexagon head screw M8 x 35 | 0.016 | 4 | 4 | 4 | 4 | 1424-170 |
| 87N-1 | Washer dia. 24/13x2.5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
| 87Q-1 | Valve for preilubrication | 1 | 1 | 1 | t | 2412-585 | |
| 87R-1 | Nut | 1 | 1 | 1 | 1 | 2313-045 | |
| 87S-1 | Special joint | 1 | 1 | 1 | 1 | 2334-027 | |
| 87T-1 | Cap | 1 | 1 | 1 | 1 | 2313-027 | |
| 87U-1 | Joint 3/8" | 1 | 1 | 1 | 1 | 1349-053 | |
| 87V-1 | Alu-gasket | 1 | 1 | 1 | 1 | 2356-123 | |
| Intermediate pressure connection | |||||||
| Only for TCMO with ex. system | |||||||
| 90A-1 | IP champer R22 | 1 | 3114-100 | ||||
| 90A-2 | IP champer R717 | 1 | 3114-101 | ||||
| 90B-1 | IP pipe | 1 | 3114-102 | ||||
| 90C-1 | Filter strainer | 1 | 2464-232 | ||||
| 90D-1 | O-ring | 2 | 1331-019 | ||||
| 90E-1 | Flange for cover | 1 | |||||
| 90F-1 | Insert for cover | 1 | |||||
| 90H-1 | O-ring | 1 | 1331-024 | ||||
| 90H-1 | Screw | 4 | 1424-191 | ||||
| 90J-1 | Gasket | 1 | 2353-180 | ||||
| 90K-1 | Screw | 4 | 1424-194 | ||||
| 90L-1 | Nut | 4 | 1432-064 | ||||
| 90M-1 | Washer | 8 | 1436-035 | ||||
| Oil return with solenoid valve | |||||||
| Only for CMO with HFC/HCFC | |||||||
| 94A-1 | Cover against oil separator | 1 | 1 | 1 | 4241-229 | ||
| 94B-1 | O-ring dia. B2,15x 3.5 | 0.004 | 1 | 1 | 1 | 1331-077 | |
| 94C-1 | Hexagon head screw M8 x 18 | 0.012 | 8 | 8 | 8 | 1424-164 | |
| 94D-1 | Spring washer | 0.006 | 8 | 8 | 8 | 1437-054 | |
| 94E-1 | Straight screw-in joint GE 6-SR 1/4" | 0.054 | 1 | 1 | 1 | 1349-124 | |
| 94F-1 | Stop valve BML 6 | 0.280 | 1 | 1 | 1 | 1374-050 | |
| 94G-1 | Straight screw-in joint GE 10-LR1/4" | 0.048 | 1 | 1 | 1 | 1349-051 | |
| 94H-1 | Filter | 0.054 | 1 | 1 | 1 | 4522-007 | |
| 94J-1 | Straight screw-in joint GE 8-LR 1/4°' | 0.044 | 1 | 1 | 1 | 1349-050 | |
| 94K-1 | Weiding nipple | 0.01 B | 1 | 1 | 1 | 2322-032 | |
| 94L-1 | Gasket | 0.006 | 2 | 2 | 2 | 2356-123 | |
| 94M-1 | Nozzle 0.6 mm | 0.002 | 1 | 1 | 1 | 3142-035 | |
| 94N-1 | Union nut | 0.080 | 1 | 1 | 1 | 2313-006 | |
| 94P-1 | Bushing G1/4"x G 1/2" | 0.072 | 1 | 1 | 1 | 2312-013 | |
| 94Q-1 | Angle swivel screw-in joint 1/4" NPT | 0.120 | 2 | 2 | 2 | 1349-089 | |
| 94R-1 | Straight screw-in joint GE 8-LR 1/4" | 0.020 | 1 | 1 | 1 | 1349-106 | |
| 94S-1 | Solenoid valve without coil | 0.624 | 1 | 1 | 1 | 1372-426 | |
| 94U-1 | Coil 220/230V, 50/60HZ, 10W | 0.260 | 1372-537 | ||||
| 94U-2 | Coil 110V, 50/60HZ, 10W | 0.260 | 1372-538 | ||||
| 94U-3 | Coil 240V, 50Hz, 10W | 0.260 | 1372-539 | ||||
| 94T-1 | Screw-in joint 1/4" NPT tor dia.10 | 0.046 | 1 | 1 | 1 | 1349-060 | |
| Oil return with solenoid valve | |||||||
| Only tor CMO wilh R717 | |||||||
| 94A-2 | Cover against oil separator | 1 | 1 | 1 | 3254-066 | ||
| 94B-2 | Gasket for cover | 0.020 | 1 | 1 | 1 | 2355-105 | |
| 94G-2 | Hexagon head screw M12 x 30 | 0.042 | 6 | 6 | 6 | 1424-215 | |
| 94D-2 | Straight screw-in joint | 0.102 | 1 | 1 | 1 | 1349-089 | |
| 94E-1 | Nipple | 0.044 | 1 | 1 | 1 | 2334-024 | |
| 94F-2 | Union nut | 0.080 | 2 | 2 | 2 | 2313-006 | |
| 94G-2 | Gasket for nipple/valve | 0.006 | 4 | 4 | 4 | 2356-123 | |
| 94H-2 | Stop valve | 1 | 1 | 1 | 2413-010 | ||
| 94J-2 | Welding nipple | 0.018 | 1 | 1 | 1 | 2322-032 | |
| 94K-2 | Angle swivel screw-in joint G 1/4" | 0.098 | 2 | 2 | 2 | 1349-087 | |
| 94L-2 | Filter complete | 1 | 1 | 1 | 4522-002 | ||
| 94M-2 | Nozzle 0.5 mm | 0.002 | 1 | 1 | 1 | 3142-034 | |
| 94P-2 | Nipple G1/4"xG1/2° | 0.082 | 1 | 1 | 1 | 2311-040 | |
| 94Q-2 | Straight screw-in joint 1/4" NPT | 0.042 | 1 | 1 | 1 | 1349-056 | |
| 94S-2 | Solenoid valve without coil | 0.624 | 1 | 1 | 1 | 1372-422 | |
| 94U-1 | Coil 220/230V, 50/50H2, 10W | 0.260 | 1372-537 | ||||
| 94U-2 | Coil 110V,50/60Hz, 10W | 0.260 | 1372-538 | ||||
| 94U-3 | Coil 240V, MHz, 10W | 0.260 | 1372-539 | ||||
| Oil return wilh solenoid valve | |||||||
| Only for TCMO with R717 and HFC/HCFC | |||||||
| 94A-3 | Cover against oil separator | 1 | |||||
| 94B-3 | O-ring dia. 91.67x 3.53 | 0.004 | 1 | 1331-080 | |||
| 94C-3 | Hexagon head screw M12 x 40 | 0.046 | 4 | 1424-217 | |||
| 94D-3 | Spring washer 20.2/12.2 x 2.5 | 0.004 | 4 | 1437-081 | |||
| 94E-3 | Angle swivel screw-joint | 0.102 | 1 | 1349-087 | |||
| 94F-3 | Nipple | 0.044 | 1 | 2334-024 | |||
| 94G-3 | Union | 0.080 | 3 | 2313-006 | |||
| 94H-3 | Gasket for nipple/valve | 0.006 | 4 | 2356-123 | |||
| 94J-3 | Welding nipple | 0.018 | 2 | 2322-032 | |||
| 94K-3 | Angle swivel screw-in joint G 1/4" | 0.098 | 2 | 1349-087 | |||
| 94L-3 | Filter complete | 1 | 4522-002 | ||||
| 94M-3 | Nipple G 1/4" xG 1/2" | 0.082 | 1 | 2311-040 | |||
| 94N-3 | Gasket dia. 19/14x1.5 | 0.004 | 2 | 2356-124 | |||
| 94P-3 | Nozzie 0.4 mm - only for R717 | 0.002 | 1 | 3142-033 | |||
| 94P-3 | Nozzle 0.5 mm - only for HFC/HCFC | 0.002 | 1 | 1342-034 | |||
| 940-3 | Straight screw-in joint 1/4" NPT | 0.042 | 2 | 1349-056 | |||
| 94S-3 | Solenoid valve without coil | 0.624 | 1 | 1372-422 | |||
| 94U-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1372-537 | ||||
| 94U-2 | Coil 10V, 50/60Hz. 10W | 0.260 | 1372-538 | ||||
| 94U-3 | Coil 240V, 50Hz, 10W | 0.260 | 1372-539 | ||||
| 94 | Stop valve | 1 | 2413-010 | ||||
| Oil return with float valve | |||||||
| Only tor CMO with HFC/HCFC | |||||||
| 95A-1 | Cover against oil separator | 0.626 | 1 | 1 | 1 | 3411-007 | |
| 95B-1 | O-ring dia.82.15 x 3.5 for 95A | 0.004 | 1 | 1 | 1 | 1331-077 | |
| 95C-1 | Hexagon head screw M8 x 18 | 0.012 | 8 | 8 | 8 | 1424-164 | |
| 95D-1 | Sprig washer | 0.006 | 8 | 8 | 8 | 1437-054 | |
| 95E-1 | Float valve complete | 0.200 | 1 | 1 | 1 | 1374-505 | |
| 95F-1 | Distance ring dia. 10/8 x 8 | 0.002 | 1 | 1 | 1 | 2212-036 | |
| 95G-1 | Hexagon head screw M5 x 35 | 0.006 | 2 | 2 | 2 | 1413-334 | |
| 95H-1 | Angle swivel G 1/4" for di.6 | 1 | 1 | 1 | 1349-092 | ||
| OiE return with float valve | |||||||
| Only for CMO with P717 | |||||||
| 95A-2 | Cover against oil separator | 1 | 1 | 1 | 4512-003 | ||
| 95B-2 | Gasket tor cover | 1 | 1 | 1 | 2355-108 | ||
| 95C-2 | Filter | 1 | 1 | 1 | 3425-077 | ||
| 95D-2 | Hexagon head screw M12 x 30 | 6 | 6 | 6 | 1424-215 | ||
| 95E-2 | Angle swivel screw-in joint | 2 | 2 | 2 | 1349-092 | ||
| Oil return with float valve | |||||||
| Only for TCMO with R717 and HFC/HCFC | |||||||
| 95A-3 | Cover with float valve | 1 | 4512-004 | ||||
| 95B-3 | O-ring dia. 91.67x 3.53 | 0.004 | 1 | 1331-080 | |||
| 95C-3 | Hexagon head screw M12 x 40 | 0.046 | 4 | 1424-217 | |||
| 95D-3 | Spring washer dia. 20.2/12.2 x 2.5 | 0.004 | 4 | 1437-081 | |||
| 95E-3 | Angle swivel screw-in joint | 2 | 1349-092 | ||||
| Thermopump | |||||||
| 98A-1 | Side cover for thermopump | 1 | 1 | 1 | 1 | 3113-133 | |
| 98B-1 | Monitor box | 1 | 1 | 1 | 1 | 1553-215 | |
| Allen screw | 2 | 2 | 2 | 2 | 1412-204 | ||
| Spring washar | 4 | 4 | 4 | 4 | 1437-020 | ||
| 98C-1 | Level indicator | 2 | 2 | 2 | 2 | 3185-038 | |
| 98D-1 | Outer part for level indicator | 2 | 2 | 2 | 2 | 3185-034 | |
| 98E-1 | Washer dia. 20/13x1.5 Al | 3 | 3 | 3 | 3 | 2356-125 | |
| 98F-1 | Rubber cap | 2 | 2 | 2 | 2 | 1554-194 | |
| 98G-1 | Solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-422 | |
| 98H-T | Solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-423 | |
| 98AB-1 | Coil 220/230V. 50/60Hz. 10W | 0.260 | 1372-537 | ||||
| 9BAB-2 | Coil 110V, 50/60HZ, 10W | 0.260 | 1372-538 | ||||
| 98AB-3 | Coil 240V, 50Hz, 10W | 0.260 | 1372-539 | ||||
| 98K-1 | Check valve | 2 | 2 | 2 | 2 | 1364-008 | |
| 98M-1 | VA-Joint with nozzle 0.6 mm | 1 | 2314-100 | ||||
| Plug connector for corils | 1 | 1 | 1 | 1 | 1372-490 | ||
| 98M-2 | VA-Joint with nozzle 1.2 mm | 2 | 3 | 4 | 2314-097 | ||
| Bracket for stop valve | 1 | 1 | 1 | 1 | 2213-085 | ||
| Allen screw M4x 12 | 2 | 2 | 2 | 2 | 1412-203 | ||
| Cable binder | 1 | 1 | 1 | 1 | 1554-053 | ||
| Straight joint 10 mm | 1 | 1 | 1 | 1 | 1349-051 | ||
| T-joint 10 mm | 2 | 3 | 4 | 1 | 1349-041 | ||
| Straight joint 6 mm | 3 | 3 | 3 | 3 | 1349-006 | ||
| Socket 10 mm NPT | 1 | 1 | 1 | 1 | 1349-101 | ||
| Angis swivel joint 10 mm BSP | 1 | 1 | 2 | 1 | 1349-177 | ||
| Angle joint 10 mm | 2 | 2 | 2 | 2 | 1349-089 | ||
| Angle swivel joint 6 mm | 1 | 1349-092 | |||||
| Angle joint 10 mm | 1 | 1 | 2 | 1 | 1349-033 | ||
| Reducing socket 3/8" -1/4" | 1 | 1 | 1 | 1349-076 | |||
| Straight joint 10 mm NPT | 2 | 2 | 1349-060 | ||||
| Arigle socket 10 mm | 1 | 1349-112 | |||||
| Washer 13/10 x 1.5 Al | 2 | 2 | 2 | 2356-123 | |||
| Washer 25/17 x 1.5 Al | 1 | 1 | 1 | 2356-130 | |||
| Washer 19/14 x 1.5 AI | 2 | 2 | 2 | 2 | 2356-124 | ||
| Spring washer tor M12 | 1 | 1 | 1 | 1437-026 | |||
| Plug | 1 | 1 | 2314-048 | ||||
| Pipe for pressure equalizing | 1 | 1 | 1 | 3185-033 | |||
| 98N-1 | Filter | 1 | 1 | 1 | 1 | 4522-007 | |
| 98P-1 | Stop valve | 1 | 1 | 1 | 1 | 2412-277 | |
| 98Q-1 | Cooling cover | 1 | 1 | 1 | 1 | 3113-171 | |
| 98R-1 | Washer dia. 29/21 x1.5 AI | 2 | 2 | 2 | 2 | 2356-136 | |
| 8BS-1 | Gasket for side cover | 1 | 1 | 1 | 1 | 2353-101 | |
| 98T-1 | Hexagon head screw M12 x 75 | 14 | 14 | 14 | 14 | 1424-061 | |
| Socket 1 /4” | 1 | 1 | 1 | 1 | 1349-101 | ||
| 98U | Solenoid valve without coil | 1372-423 | |||||
| 93V | Solenoid valve without coil | 1 | 1 | 1 | 1372-423 | ||
| 98AB-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1 | 1 | 1 | 1 | 1372-537 |
| 99A8-2 | Coil 110V,50/60Hz,10W | 0.260 | 1372-538 | ||||
| 98AB-3 | Coil 240V, 50Hz,10W | 0.260 | 1372-539 | ||||
| 98X | PT100 sensor | 1 | 1 | 1 | 1 | 1373-253 | |
| 98Y | Stop valve | 1 | 1 | 1 | 1 | 2412-277 | |
| 98Z | Non-return valve | 1 | 1 | 1 | 1 | 1364-022 | |
| 98AA | Screw joint | 1 | 1 | 1 | 1 | 2314-105 | |
| UNISAB | |||||||
| 99A-1 | Support for UNISAB | 1 | 1 | 1 | 1 | 2213-500 | |
| 99B-1 | Distance washers | 4 | 4 | 4 | 4 | 2212-130 | |
| 99C-1 | Sraw for support M10 x 20 | 2 | 2 | 2 | 2 | 1424-190 | |
| 99D-1 | Screw tor UNISAB M6 x 20 | 4 | 4 | 4 | 4 | 1424-152 | |
| 99E-1 | Washers dia. 22/7 | 4 | 4 | 4 | 4 | 1436-025 | |
| Tools for compressor CMO and TCMO | |||||||
| Line no. A600 = Norma set | |||||||
| Lire no. A601 = Extended set | |||||||
| Line no. A6C2 =Tools for coupling AMR | |||||||
| Line no. A603 =Tools for alignment of flexible coupling | |||||||
| Pos no | Designation | Dim | Part no | Line no A600 | Line no A601 | Line no A601 | Line no A601 | |
| 1 | Clamp with screw | 3183-141 | 4 | 4 | ||||
| 2 | Toois for shaft seal | 3183-139 | 1 | 1 | ||||
| 3 | Tommy screws tor cyl. liners | 3183-041 | 2 | 2 | ||||
| 5 | Supporting plate for pistons | 3181-114 | 8 | 8 | ||||
| 6 | Spanner for healing cartridge | JV55 | 3183-060 | 1 | 1 | |||
| 7 | Puller for coupling or belt pulley | 3183-058 | 1 | 1 | ||||
| 8 | Adjustment jig for couping | 3183-104 | 1 | |||||
| 9-1 | Wrench for socket cap screw | JV2 | 1 | |||||
| 9-2 | Wrench for socket cap screw | JV3 | 1 | |||||
| 9-3 | Wrench for socket cap screw | JV4 | 1 | |||||
| 9-4 | Wrench for socket cap screw | JV5 | 1 | |||||
| 9-5 | Special wrench for shaft seal | 1612-392 | 1 | |||||
| 10 | Retaining ring pliers | J21 | 1 | |||||
| 11-1 | Ring and open spanner | JV10 | 1612-392 | 1 | ||||
| 11-2 | Ring and open spanner | JV13 | 1 | |||||
| 11-3 | Ring and open spanner | JV17 | 1 | |||||
| 11-4 | Ring and open spanner | JV27 | 1 | |||||
| 12-1 | Ring spanner | JV6X7 | 1 | |||||
| 12-2 | Ring spanner | JV8X9 | 1 | |||||
| 13-1 | Socket wrench | JV10 | 1 | |||||
| 13-2 | Socket wrench | JV13 | 1 | |||||
| 13-3 | Socket wrench | JV17 | 1 | |||||
| 13-4 | Socket wrench | JV19 | 1 | |||||
| 13-5 | Sockte wrench | JV22 | 1 | |||||
| 13-6 | Socket wrench | JV24 | 1 | |||||
| 13-7 | Socket wrench | JV1/2 | 1 | 1 | ||||
| 14 | Ratchet handle | 1 | ||||||
| 15 | Speed handle | 1 | ||||||
| 16 | Universal joint for socket wrench | 1 | ||||||
| 17-1 | Extension rod far socket wrench | 1 | ||||||
| 17-2 | Extension rod tor socket wrench | 1 | ||||||
| 18 | Screw driver socket | 1 | ||||||
| 19-1 | Torque wrench 15-90 Mm | 1 | 1 | |||||
| 19-2 | Torque wrench 40-200 Nm | 1 | ||||||
| 20 | Coupler for torque wrench | 1 | 1 | |||||
| 21 | Open spanner for torque wrench | JV1/2 | 1 | 1 | ||||
| 22 | Feeler gauge | 1 | ||||||
Sabroe screw compressors
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 110 SAB 120 SAB 128
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283
VMY 336 VMY 347 VMY 436
VMY 447 VMY 536
Sabroe piston compressors
Sabroe SMC 104 Sabroe SMC 106 Sabroe SMC 108 Sabroe SMC 112 Sabroe SMC 116
Sabroe TSMC 108 Sabroe TSMC 116
Spare parts catalogs for Sabroe screw compressors:
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283