- En →
- Zapchasti Kompressorov →
- Kompressory Sabroe →
- Sab 110
Toros LLC is industrial cold of Europe
Spare parts, repair and maintenance of refrigeration units.
Spare parts for compressors in stock and on order!
call:
WhatsApp
e-mail: storopov86@gmail.com
Spare parts for Sabroe SAB110 compressors
| Pos. | Designation | No. | Part no |
| Complete compressor, male drive: | |||
| SAB 110 SM | 4161-050 | ||
| SAB 110SM for HLI/ECO | 4161-054 | ||
| SAB 110 LM | 4161-052 | ||
| SAB 110 LM for HLI/ECO | 4161-056 | ||
| Complete compressor, female drive: | |||
| SAB 110 SF | 4161-051 | ||
| SAB 110 SF for HLI/ECO | 4161-055 | ||
| SAB 110 LF | 4161-053 | ||
| SAB 110 LF for HLI/ECO | 4161-057 | ||
| Compressor housing | |||
| 10-1 | Compressor housing (S) not prepared for HLI and ECO | 1 | 3011-016 |
| 10-2 | Compressor housing (L) not prepared for HLI and ECO | 1 | 3011-007 |
| 10-3 | Compressor housing (S) prepared for HLI and ECO | 1 | 3011-018 |
| 10-4 | Compressor housing (L) prepared for HLI and ECO | 1 | 3011-017 |
| Bearing cover at suction end | |||
| 20-1 | Bearing cover, female drive | 1 | 3013-082 |
| 20-2 | Bearing cover, male drive | 1 | 3013-083 |
| 21 | O-ring dia. 254.00 x 3.53 | 1 | 1331-113 |
| 22 | Cylindrical pin. dia. 12 x 40 | 2 | 1445-084 |
| 23 | Socket cap screw M12 x 35 | 10 | 1413-387 |
| 24 | Threaded plug with collar 1/2" | 1 | 1343-027 |
| 25 | Gasket dia. 27/21x1.5 | 1 | 2356-133 |
| 30 | Suction port for male drive | 1 | 3031-019 |
| 31 | Suction port for female drive | 1 | 3031-020 |
| 32 | Cylinder screw M8 x 25 | 3 | 1413-357 |
| 33 | Cylinder screw M8 x 35 | 1 | 1413-359 |
| Bearing cover at discharge end | |||
| 40 | Cover | 1 | 3013-075 |
| 43 | Cylinder screw M 10 x 30 | 4 | 1413-372 |
| 44 | Adjusting screw M20 | 2 | 2111-122 |
| 45 | Locking screw M6 x 10 | 4 | 1413.231 |
| 0061 -845 | |||
| Pos. | Designation | No. | Part no |
| Capacity regulatory cylinder | |||
| 50 | Cylinder | 1 | 3043-098 |
| 51 | O-ring dia. 66.27 x 3.53 | 1 | 1331-072 |
| 52 | Cylinder screw M10 x 30 | 3 | 1413-372 |
| Cover for capacity adjusting cylinder | |||
| 60 | Cover | 1 | 3013-193 |
| 61 | O-ring dia. 88,49 x 3,53 | 1 | 1331-079 |
| 62 | Cylinder screw M8 x 35 | 4 | 1413-359 |
| Housing for capacity indicator | |||
| 70 | Housing | 1 | 3045-002 |
| 71 | Cylinder screw M6 x 30 | 4 | 1413-343 |
| 72 | Cover for capacity indicator | 1 | 3045-003 |
| 73 | Cylinder screw M6 x 50 | 4 | 1413-347 |
| 74 | O-ring dia. 98.02 x 3.53 | 1 | 1331-081 |
| 75-1 | Glass for indicator (L) | 1 | 3045-013 |
| 75-2 | Glass for indicator (S) | 1 | 3045-012 |
| 83 | Driving pin dia. 4 x 6 for shaft seal cover | 1 | 1446-011 |
| Slide stop | |||
| 101 | Sealing ring | 1 | 1332-121 |
| 103 | Piston | 1 | 3043-101 |
| 105 | Retainer | 1 | 3043-102 |
| 106 | Cylinder screw M6 x 25 | 2 | 1413-342 |
| 107 | Threaded G 1/8" plug | 1 | 1343-024 |
| 108 | Gasket dia. 16/10 | 1 | 2356-216 |
| Rotors and bearings | |||
| 110-1 | Set of rotors for SM | 1 | 3024-112 |
| 110-2 | Set of rotors for SF | 1 | 3024-082 |
| 110-3 | Set of rotors for LM | 1 | 3024-115 |
| 110-4 | Set of rotors for LF | 1 | 3024-080 |
| 111 | Roller bearing | 4 | 1512-001 |
| 114 | Thrust washer | 2 | 3021-019 |
| 115 | Cylinder screw M10 x 35 | 2 | 1413-373 |
| 119 | Retainer pin for male and female rotor bearing | 2 | 3021-017 |
| 130 | Balance piston | 2 | 3025-014 |
| 132 | Four point bearing | 2 | 1513-039 |
| 0661-845 | |||
| Pos. | Designation | No. | Part no |
| 133 | Set of shims dia. 63/80 for adjusting the clearance | 2 | 2124-079 |
| between the rotor and outlet ports compressing: | |||
| 1 off 0.82 mm | |||
| 1 off 0.85 mm | |||
| 1 off 0.88 mm | |||
| 1 off 0.91 mm | |||
| 1 off 0.94 mm | |||
| 1 off 0.97 mm | |||
| 1 off 1,00mm | |||
| 139 | Ring for balance piston | 2 | 3025-030 |
| Discharge ports | |||
| 140 | Discharge port for male rotor | 1 | 3031-029 |
| 141 | Discharge port for female rotor | 1 | 3031-030 |
| 142 | Socket cap screw M8 x 110 | 6 | 1413-311 |
| 143 | Sealing ring dia. 13/8 | 6 | 3049-006 |
| Parts for adjusting rotors | |||
| 153 | Thrust cover | 2 | 3013-080 |
| 154 | O-ring dia. 72.62 x 3.53 | 2 | 1331-074 |
| Shaft seal | |||
| 160 | Shaft seal, complete | 1 | 1332-178 |
| 162 | O-ring dia. 50.39 x 3.53 (included in DOS. 160) | 1331-067 | |
| 163 | 0-ring dia. 34.52x3.53 | 1 | 1331-028 |
| 165 | Cover for shaft seal | 1 | 3013-084 |
| 166 | O-ring dia. 72.62 x 3.53 | 1 | 1331-074 |
| 167 | Cylinder screw M8 x 25 | 4 | 1413-375 |
| 168 | Balancing piston | 1 | 3025-015 |
| Suction filter | |||
| 170 | Suction filter | 1 | 3042-082 |
| Adjusting system for Vpslide | |||
| 180 | Adjusting screw M8 x 90 | 1 | 1424-180 |
| 181 | Nut | 2 | 1432-063 |
| VI-Slide | |||
| 190 | Slide | 1 | 3044-026 |
| 191-1 | Spring for SAB110 L | 1 | 2144-046 |
| 191-2 | Spring for SAB 110 S | 1 | 2144-045 |
| 0661-845 | |||
| Pos. | Designation | No. | Part no |
| Capability adjusting slide | |||
| 200-1 | Slide for L | 1 | 3043-097 |
| 200-2 | Slide for S | 1 | 3043-104 |
| 201 | Piston part | 2 | 3043-100 |
| 203 | O-ring dia. 23,39 x 3,53 | 1 | 1331-021 |
| 204 | Sealing ring | 1 | 1332-120 |
| 205 | Cylindrical pin dia. 6x12 | 1 | 1445-075 |
| 206 | Slotted nut | 1 | 1514-198 |
| 207-1 | Piston rod for L | 1 | 3043-121 |
| 207-2 | Piston rod for S | 1 | 3043-122 |
| 208 | Locking plate | 1 | 1514-068 |
| Spindle for capacity indication | |||
| 210-1 | Spindle | 1 | 3045-057 |
| 216 | Magnetic coupling | 1 | 3045-061 |
| 217 | O-ring dia.44.12x 2.62 (incl. in pos. 216) | (1) | 1331-146 |
| 218 | Hexagon head screw M4 x 16 (incl. in pos. 216) | (1) | 1413-320 |
| 219 | Hexagon head screw M4 x 20 (incl. in pos. 216) | (2) | 1413-322 |
| Capacity indication | |||
| 221 | Indication dial | 1 | 3045-001 |
| 223 | Socket cap screw M4 x 10 | 1 | 1413-319 |
| 224 | Backing ring | 1 | 2356-155 |
| 226 | Locking washer DL 15/84 | 1 | 1437-054 |
| 227 | Locking washer DC 8/4.3 | 1 | 1437-060 |
| Economizer HLI inlet | |||
| 235 | Threaded plug with collar 1/2" | 2 | 1343-027 |
| 236 | Gasket dia. 27/21 x1.5 | 2 | 2356-133 |
| To connect the economizer line to the compressor use: Connection for pipe dia. 18/15 | 1 | 1349-130 | |
| Suction gas inlet | |||
| 252 | 0-ring dia. 107.54 x 3.53 | 1 | 1331-085 |
| 253 | Seat for suction valve | 4 | 3013-120 |
| 254 | Cylinder screw M12 x 35 | 4 | 1413-387 |
| 255-1 | Welding flange DN 50 | 1 | 2342-172 |
| 255-2 | Welding flange DN 65 | 1 | 2342-173 |
| 0661-845 | |||
| Pos. | Designation | No. | Part no |
| 255-3 | Welding flange DN 80 | 1 | 2342-174 |
| 256 | O-ring dia. 91.67 x 3.53 | 1 | 1331-080 |
| 257 | Al-Gasket dia. 19/14 x 1.5 | 1 | 2356-124 |
| 258 | Threaded plug with collar 1/4" | 1 | 1343-025 |
| Non-return valve | |||
| 260 | Piston for non-return valve | 1 | 3042-039 |
| 261 | Spring | 1 | 2144-038 |
| 262 | Locking ring | 2 | 1437-291 |
| 263 | Guide for piston | 1 | 3042-040 |
| Valve cone (optional for twin/triple units only) | |||
| 265 | Spindle | 1 | 3042-050 |
| 266 | Gasket ring dia. 66/56 x 2 | 1 | 2354-174 |
| 267 | Cone ring | 1 | 3042-051 |
| 268 | Nut M16 | 1 | 1432-307 |
| Suction side throtting system | |||
| 270 | Cylinder | 1 | 3042-038 |
| 271 | Piston | 1 | 3042-042 |
| 272 | Spring | 1 | 2144-037 |
| 273 | O-ring dia. 107.54 x 3.53 | 1 | 1331-085 |
| Connecting parts for slide rod | |||
| 311-1 | Cylinder screw M8 x 50 (type L) | 1 | 1413-368 |
| 311-2 | Cylinder screw M8 x 40 (type S) | 1 | 1413-360 |
| External oil piping | |||
| 320-1 | Connecting pipe set, SAB 110 SM | 1 | 3049-014 |
| 320-2 | Connecting pipe set, SAB 110 SF | 1 | 3049-013 |
| 320-3 | Connecting pipe set, SAB 110 LM | 1 | 3049-010 |
| 320-4 | Connecting pipe set, SAB 110 LF | 1 | 3049-011 |
| 325-1 | Orifice for oil injection - dia. 6 (R717) | 1 | 3043-107 |
| 325-2 | Orifice for oil injection - dia. 4 (R22) | 1 | 3043-106 |
| 325-3 | Orifice for oil injection - dia. 2 (HFC) | 1 | 3043-142 |
| Electrical signal transmitter for | |||
| capacity slide position (optional) | |||
| 350 | Turning transmitter | 1 | 3448-004 |
| 351-1 | Sight-glass for transmitter (L) | 1 | 3045-010 |
| 351-2 | Sight glass for transmitter (S) | 1 | 3045-011 |
| 352 | Screw for transmitter M3 x 8 (incl. in pos. 350) | (4) | 1412-012 |
| 0661-845 | |||
| Pos. | Designation | No. | Part no |
| Oil filter | |||
| 450 | Flange | 1 | 3013-176 |
| 451 | O-ring dia. 66.27 x 3.53 | 1 | 1331-072 |
| 452 | O-ring dia. 107.54 x 3.53 | 1 | 1331-085 |
| 455 | Cylinder screw M5 x 16 | 2 | 1413-331 |
| 456 | Guide ring dia. 14.5/6 | 3 | 2356-120 |
| 457 | Washers dia. 18/6 | 3 | 2356-122 |
| 458 | Rod for magnets | 1 | 3042-043 |
| 459 | Magnet | 4 | 1517-022 |
| 460 | Spacer for magnet | 3 | 3424-039 |
| 461 | Spring | 1 | 2143-026 |
| 462 | Spring | 1 | 2143-063 |
| 470 | Oil filter cartridge | 1 | 1517-040 |
| 480 | Welding flange | 1 | 3013-175 |
| 481 | O-ring dia. 91.67 x 3.53 | 1 | 1331-080 |
| Oil flow switch | |||
| 500 | Terminal box | 1 | 1554-001 |
| 501 | Housing for flow switch | 1 | 3013-076 |
| 502 | O-ringdia.107.54 x 3.53 | 1 | 1331-085 |
| 503 | Guide for oil filter | 1 | 3042-047 |
| 504 | Circlip | 1 | 1437-168 |
| 505 | Nippel for flow switch | 1 | 2314-106 |
| 506 | Gasket dia. 32/27 x 1.5 | 1 | 2356-139 |
| 507 | Flow switch with ball | 1 | 1553-024 |
| 509 | Gasket dia. 20/13 x 1.5 | 1 | 2356-125 |
| 510 | Spring | 1 | 2144-041 |
| 511 | Washer dia. 22/13 x 2.0 | 1 | 2114-046 |
| 512 | Cylinder screw M 12 x 35 | 4 | 1413-387 |
| Safety valve | |||
| 550 | Safety valve | 1 | 3042-046 |
| 551 | Bush | 1 | 3042-036 |
| 552 | O-ring dia. 91.67 x 3.53 | 1 | 1331-080 |
| 553 | O-ring dia. 91.67 x 3.53 | 1 | 1331-080 |
| 554 | Cylinder screw M6 x 25 | 4 | 1413-342 |
| 555 | O-ring dia. 56.74 x 3.53 | 1 | 1331-069 |
| 556 | Welding flange | 1 | 3013-077 |
| 557 | Cylinder screw | 4 | 1413-403 |
| 0661-845 | |||
| Pos. | Designation | No. | Part no |
| Limitation of minimum capacity (optional) | |||
| Please refer to the instruction manual, section 9 | |||
| 228 | Spacer ring for SAB 110 S and L | 1 | 3045-041 |
| 229 | O-ring dia. 69,52 x 2,62 | 1 | 1331-145 |
| 210-2 | Spindle, replaces pos. 210-1 | 1 | 3045-063 |
| 75-3 | Glass for indicator SAB 110 L, replaces pos. 75-1 | 1 | 304S-043 |
| 75-4 | Glass for indicator SAB 110 S, replaces pos. 75-2 | 1 | 304S-042 |
| 351-3 | Glass for indicator for turning transmitter SAB 110 L, | 1 | 3045-045 |
| replaces pos. 351-1 | |||
| 351-4 | Glass for indicator for turning transmitter SAB 110 S, | 1 | 3045-044 |
| replaces pos. 351-2 | |||
| Temperature/Pressure transducers | |||
| 751 | Pressure transducer, suction gas (PT1) | 1 | 1373-249 |
| 752 | Pressure transducer, oil after filter (PT3) | 1 | 1373-271 |
| 753 | Pressure transducer, oil before filter (PT4) | 1 | 1373-271 |
| 756 | Elbow coupling 10-RL | 3 | 1349-154 |
| 761 | Temperature transmitter, compressor oil (TT6) | 1 | 1373-264 |
| 762 | Temperature transmitter, suction gas (TT7) | 1 | 1373-264 |
| 765 | Gasket ring DKA R 1/4" | 2 | 1349-135 |
| 0661-645 | |||
Sabroe screw compressors
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 110 SAB 120 SAB 128
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283
VMY 336 VMY 347 VMY 436
VMY 447 VMY 536
Sabroe piston compressors
Sabroe SMC 104 Sabroe SMC 106 Sabroe SMC 108 Sabroe SMC 112 Sabroe SMC 116
Sabroe TSMC 108 Sabroe TSMC 116
Spare parts catalogs for Sabroe screw compressors:
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283