- En →
- Zapchasti Kompressorov →
- Kompressory Sabroe →
- Smc 104 106 108 Tsm 108
Toros LLC is industrial cold of Europe
Spare parts, repair and maintenance of refrigeration units.
Spare parts for compressors in stock and on order!
call:
WhatsApp
e-mail: storopov86@gmail.com
Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E
Heat pump parts
Spare parts sets
*) If the compressor is used as a heat pump, this must be specified when ordering for proper delivery
| Position on the chart | Description | Part weight in kg. | Quantity for each compressor | Catalogue number | |||
| SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
| scheme | Compressor frame | ||||||
| 1A-1 | SMC 104 frame | 240.000 | 1 | 3111-065 | |||
| 1A-2 | SMC 106 frame | 274.000 | 1 | 3111-066 | |||
| 1A-3 | SMC 108 frame | 285.000 | 1 | 3111-067 | |||
| 1A-4 | TSMC 108 frame | 290.000 | 1 | 3111-068 | |||
| 1B-1 | Oil level peephole (glass) diam. 80 | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
| 1C-1 | PRP 137 O-ring - 52.07 x 2.62*) | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
| 1D-1 | M6 x 18 hex head screw | 0.010 | 4 | 4 | 4 | 4 | 1424-148 |
| scheme | Top cover — air cooling | ||||||
| 2A-1 | S-L upper cover | 19.000 | 1 | 2 | 3 | 2 | 3113-191 |
| 2A-2 | Upper cover with S-L flange | 20.500 | 1 | 1 | 1 | 2 | 3113-192 |
| 2A-3 | Upper cover E | 19.000 | 1 | 2 | 3 | 2 | 3113-177 |
| 2A-4 | Upper cover with E flange | 20.500 | 1 | 1 | 1 | 2 | 3113-176 |
| 2C-1 | Top cover gasket | 0.020 | 2 | 3 | 4 | 4 | 2353-151 |
| 2E-1 | M14 x 90 hex head screw | 0.120 | 30 | 46 | 62 | 60 | 1424-083 |
| 2F-1 | M14 x 120 hex head screw | 0.165 | 2 | 2 | 2 | 4 | 1424-090 |
| 2G-1 | M14 washer diam. 28/15 x 2.5 | 0.010 | 32 | 48 | 64 | 64 | 1436-076 |
| scheme | Top cover - water cooling | ||||||
| (see fig.) | |||||||
| 2A-1 | S-L upper cover | 19.000 | 1 | 2 | 3 | 2 | 3113-191 |
| 2A-2 | Upper cover with S-L flange | 20.500 | 1 | 1 | 1 | 2 | 3113-192 |
| 2A-3 | Upper cover E | 19.000 | 1 | 2 | 3 | 2 | 3113-177 |
| 2A-4 | Upper cover with E flange | 20.500 | 1 | 1 | 1 | 2 | 3113-176 |
| 2B-1 | Water cap for cap with flange | 5.800 | 1 | 1 | 1 | 2 | 3113-195 |
| 2B-2 | Left water cap | 5.800 | 1 | 1 | 2 | 2 | 3113-193 |
| 2B-3 | Right water cap | 5.800 | 1 | 1 | 3113-194 | ||
| 2C-1 | Top cover gasket | 0.020 | 2 | 3 | 4 | 4 | 2353-151 |
| 2D-1 | Water cover gasket Position 2B-1 | 0.020 | 1 | 1 | 1 | 2 | 2353-176 |
| 2D-2 | Water cover gasket Position 2B-2/2B-3 | 0.020 | 1 | 2 | 3 | 2 | 2353-175 |
| 2E-2 | M14 x 110 hex head screw | 0.150 | 30 | 46 | 62 | 60 | 1424-087 |
| 2F-1 | M14 x 120 hex head screw | 0.165 | 2 | 2 | 2 | 4 | 1424-090 |
| 2G-1 | M14 washer, diam. 28/15 x 2.5 | 0.010 | 32 | 48 | 64 | 64 | 1436-076 |
| 2H-1 | M10 x 35 hex head screw | 0.050 | 4 | 6 | 8 | 8 | 1424-193 |
| 2J-1 | M10 washer, diam. 21/10.5 x 2 | 0.008 | 4 | 6 | 8 | 8 | 1436-035 |
| scheme | Side cover - air cooling | ||||||
| 3A-1 | Side cover | 10.900 | 2 | 2 | 2 | 2 | 3113-148 |
| 3C-1 | Side cover gasket | 0.020 | 2 | 2 | 2 | 2 | 2353-151 |
| 3E-1 | M14 x 65 hex head screw | 0.045 | 32 | 32 | 32 | 32 | 1424-246 |
| 3G-1 | M14 washer, diam. 28/15 x 2.5 | 0.010 | 32 | 32 | 32 | 32 | 1436-076 |
| scheme | Side cover - water cooling | ||||||
| 3A-2 | Side cover | 15.000 | 2 | 2 | 2 | 2 | 3113-140 |
| 3B-1 | Water cover | 5.800 | 2 | 2 | 2 | 2 | 3113-138 |
| 3C-1 | Side cover gasket | 0.020 | 2 | 2 | 2 | 2 | 2353-151 |
| 3D-1 | Water cover gasket | 0.020 | 2 | 2 | 2 | 2 | 2353-154 |
| 3E-2 | M14 x 55 hex head screw | 0.065 | 28 | 28 | 28 | 28 | 1424-244 |
| 3F-1 | M14 x 35 hex head screw | 0.045 | 4 | 4 | 4 | 4 | 1424-240 |
| 3G-1 | M14 washer, diam. 28/15 x 2.5 | 0.010 | 32 | 32 | 32 | 32 | 1436-076 |
| 3H-1 | M12 x 40 hex head screw | 0.050 | 2 | 2 | 2 | 2 | 1424-217 |
| 3J-1 | M12 washer, diameter 24/13 x 2.5 | 0.008 | 2 | 2 | 2 | 2 | 1436-036 |
| scheme | End cover on the pump side | ||||||
| 4A-1 | End cap | 17.950 | 1 | 1 | 1 | 1 | 3113-028 |
| 4B-1 | Gasket | 0.020 | 1 | 1 | 1 | 1 | 2353-011 |
| 4C-1 | M14 x 100 hex head screw | 0.150 | 14 | 14 | 14 | 14 | 1424-085 |
| 4D-1 | M14 washer diam. 28/15 x 2.5 | 0.010 | 14 | 14 | 14 | 14 | 1436-076 |
| scheme | Pump side bearing cover | ||||||
| 5A-1 | Bearing cover | 9.100 | 1 | 1 | 1 | 1 | 3113-031 |
| 5B-1 | M14 x 35 hex head screw | 0.055 | 6 | 6 | 6 | 6 | 1424-240 |
| 5C-1 | Main bearing bush | 1.200 | 1 | 1 | 1 | 1 | 2132-021 |
| 5C-2 | Main bearing repair bush (0.5 mm repair size) | 1.220 | 1 | 1 | 1 | 1 | 2132-022 |
| 5D-11 | Gasket - 0.3 mm | 0.005 | 1 | 1 | 1 | 1 | 2353-013 |
| 5D-2 | Gasket - 0.5 mm | 0.006 | 1 | 1 | 1 | 1 | 2353-100 |
| 5D-3 | Gasket - 0.75 mm | 0.010 | 1 | 1 | 1 | 1 | 2353-014 |
| 5D-4 | Gasket - 1.0 mm | 0.015 | 1 | 1 | 1 | 1 | 2353-015 |
| scheme | Bearing cover on the side of the shaft seal | ||||||
| 6A-1 | Bearing cover | 23.000 | 1 | 1 | 1 | 1 | 3113-124 |
| 6B-1 | M14 x 60 hex head screw | 0.085 | 14 | 14 | 14 | 14 | 1424-245 |
| 6C-3 | Main bearing bush | 1.200 | 1 | 1 | 1 | 1 | 2132-021 |
| 6C-4 | Main bearing repair bush (0.5 mm repair size) | 1.200 | 1 | 1 | 1 | 1 | 2132-022 |
| 6D-1 | Gasket | 0.020 | 1 | 1 | 1 | 1 | 2353-011 |
| 6E-1 | M14 washer, diam. 28/15 x 2.5 | 0.010 | 14 | 14 | 14 | 14 | 1436-076 |
| 6F | Pre-lubrication valve | 1 | 1 | 1 | 1 | 2412-585 | |
| 6G | Nut | 1 | 1 | 1 | 1 | 2313-045 | |
| 6H | Nipple | 1 | 1 | 1 | 1 | 2334-027 | |
| 6J | Plug | 1 | 1 | 1 | 1 | 2313-027 | |
| 6K | 3/8" adapter | 1 | 1 | 1 | 1 | 1349-053 | |
| 6L | Aluminum gasket | 1 | 1 | 1 | 1 | 2356-123 | |
| scheme | Shaft seal type SB100 Version 1 for compressors up to 98379 | ||||||
| Spare parts kit: | 1 | 1 | 1 | 1 | 3184-225 | ||
| It consists of: -- see Version 3 | |||||||
| Version 2 for compressors with a gray number after 98379 incl. | |||||||
| Spare parts kit: | 1 | 1 | 1 | 1 | 3126-178 | ||
| It consists of: | |||||||
| 10E-2 | Steel sliding ring | 1 | 1 | 1 | 1 | ||
| 10F-1 | Graphite sliding ring | 1 | 1 | 1 | 1 | ||
| 10D-1 | Rubber sealing ring dia. 75.79 x 3.53 | 1 | 1 | 1 | 1 | ||
| 10G-2 | Cuff | 1 | 1 | 1 | 1 | ||
| 10J-1 | M5 x 16 hexagon head screw | 4 | 4 | 4 | 4 | ||
| 13 | Hexagonal glitch - NV 4 x 90 x 90 | 1 | 1 | 1 | 1 | ||
| 8B-1 | Cover gasket | 1 | 1 | 1 | 1 | ||
| Installation instructions | 0171-934 | ||||||
| Version 3 | |||||||
| Spare parts kit: | 1 | 1 | 1 | 1 | 3184-225 | ||
| It consists of: | |||||||
| 10E-1 | Steel sliding ring | 1 | 1 | 1 | 1 | ||
| 10F-1 | Graphite sliding ring | 1 | 1 | 1 | 1 | ||
| 10D-1 | O-ring rubber sealing ring dia. 75.79 x 3.53 | 1 | 1 | 1 | 1 | ||
| 10G-1 | O-ring rubber sealing ring dia. 82.14 x 3.53 | 1 | 1 | 1 | 1 | ||
| 10J-1 | M5 x 16 hexagon head screw | 4 | 4 | 4 | 4 | ||
| 13 | Key - NV 4 x 90 x 90 | 1 | 1 | 1 | 1 | ||
| 8B-1 | Cover gasket | 1 | 1 | 1 | 1 | ||
| Installation instructions | 0171-930 | ||||||
| scheme | Shaft seal assembly: SMC/TSMC 100 | 1 | 1 | 1 | 1 | 3184-226 | |
| It consists of: | |||||||
| 8A-2 | Cap (SMC/TSMC 100) | 1 | 1 | 1 | 1 | 3113-175 | |
| 8B-1 | Cover gasket | 1 | 1 | 1 | 1 | 2353-005 | |
| 8C-1 | M10 x 40 hex head screw - DIN 933 | 6 | 6 | 6 | 6 | 1424-194 | |
| Key - NV 4 x 90 x 90 | 1 | 1 | 1 | 1 | 1612-392 | ||
| 8D-1 | 1/4" hose connector | 1 | 1 | 1 | 1 | 1345-143 | |
| 8E-1 | 3/16” x 400 PVC hose | 1241-190 | |||||
| 8F-1 | Ring diam. 76 | 1 | 1 | 1 | 1 | 1437-295 | |
| 8G-1 | Locking spring | 1 | 1 | 1 | 1 | 3126-169 | |
| 8H-1 | Pin dia. 4 x 20 | 1 | 1 | 1 | 1 | 1446-081 | |
| 10A-1 | Retaining flange | 1 | 1 | 1 | 1 | 3126-166 | |
| 10B-1 | Spring | 10 | 10 | 10 | 10 | 2142-058 | |
| 10D-1 | O-ring rubber sealing ring dia. 75.79 x 3.53 | 1 | 1 | 1 | 1 | 1331-075 | |
| 10E-2 | Steel ring | 1 | 1 | 1 | 1 | 3126-167 | |
| 10F-1 | Graphite sliding ring | 1 | 1 | 1 | 1 | 3126-168 | |
| 10G-1 | O-ring rubber sealing ring dia. 82.14 x 3.53 | 1 | 1 | 1 | 1 | 1331-077 | |
| 10H-1 | Locking ring | 1 | 1 | 1 | 1 | 3126-153 | |
| 10J-1 | M5 x 16 hexagon head screw | 4 | 4 | 4 | 4 | 1413-329 | |
| scheme | Oil pump | ||||||
| 11-1 | Oil pump assembly | 2.400 | 1 | 1 | 1 | 1 | 3141-004 |
| Includes: | |||||||
| Oil pump | |||||||
| 11J - Lock nut, M10 x 10.7 | |||||||
| 11L- M10 washer dia. 21/10.5 x 2 | |||||||
| 11N - 5 x 5 x 12 key | |||||||
| 11P - Gasket dia. 32/27 x 1.5 | |||||||
| 11S - Thread nipple | |||||||
| 11G-1 | Pump gear | 0.660 | 1 | 1 | 1 | 1 | 3141-046 |
| 11H-1 | Crankshaft gear | 0.530 | 1 | 1 | 1 | 1 | 3141-047 |
| 11M-1 | M6 x 25 hex head screw | 0.010 | 4 | 4 | 4 | 4 | 1424-153 |
| 11Q-1 | M12 x 30 hex head screw | 0.040 | 2 | 2 | 2 | 2 | 1424-215 |
| 11R-1 | Spring washer dia. 12 | 0.002 | 2 | 2 | 2 | 2 | 1437-081 |
| 11T-1 | Spring washer - diam. 11,1/6,1 x 1,6 | 0.005 | 4 | 4 | 4 | 4 | 1437-022 |
| Position on the chart | Description | Part weight in kg. | Quantity for each compressor | Catalogue number | |||
| SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
| scheme | Discharge cylinder | ||||||
| 12-1 | Discharge cylinder assembly L=75, S=21.5 | 1.765 | 1 | 1 | 1 | 3135-149 | |
| 12-2 | Discharge cylinder assembly L=100, S=46.5 | 1.790 | 1 | 1 | 1 | 1 | 3135-150 |
| 12-3 | Discharge cylinder assembly L=125, S=71.5 | 1.815 | 1 | 1 | 1 | 3135-151 | |
| 12-4 | Discharge cylinder assembly L=150, S=96.5 | 1.840 | 1 | 1 | 3135-152 | ||
| 12-5 | Discharge cylinder (HP) assembly L=82, S=24.5 | 1.800 | 1 | 3135-161 | |||
| 12A-1 | Discharge cylinder, (SMC and TSMC LP) | 1.700 | 2 | 3 | 4 | 3 | 3135-147 |
| 12A-2 | Discharge cylinder, (TSMC HP) | 1.800 | 1 | 3135-148 | |||
| 12B-1 | Piston | 0.220 | 2 | 3 | 4 | 4 | 3135-034 |
| 12C-1 | 75mm piston rod (SMC only) | 0.065 | 1 | 1 | 1 | 3135-041 | |
| 12C-2 | 100 mm piston rod | 0.090 | 1 | 1 | 1 | 1 | 3135-042 |
| 12C-3 | 125 mm piston rod | 0.115 | 1 | 1 | 1 | 3135-043 | |
| 12C-4 | 150 mm piston rod | 0.140 | 1 | 1 | 3135-044 | ||
| 12C-5 | 82 mm piston rod, grounded, (TSMC HP only) | 0.090 | 1 | 3135-140 | |||
| 12D-1 | Screw plug - 3/8” BSP | 0.065 | 2 | 3 | 4 | 4 | 2314-025 |
| 12E-1 | Gasket - diam. 25/17 x 1.5 | 0.002 | 2 | 3 | 4 | 4 | 2356-130 |
| 12F-1 | Dia. 52 lock ring (SMC and TSMC LP) | 0.008 | 2 | 3 | 4 | 3 | 1437-155 |
| 12G-1 | Spring guide | 0.040 | 2 | 3 | 4 | 4 | 2145-004 |
| 12H-1 | Spring holder (SMC and TSMC LP) | 0.110 | 2 | 3 | 4 | 3 | 3135-057 |
| 12J-1 | Spring (external) | 0.065 | 2 | 2 | 4 | 4 | 2142-056 |
| 12J-2 | Spring (internal) | 0.035 | 2 | 3 | 4 | 4 | 2142-055 |
| 12K-1 | Ring - diam. 9 mm | 0.002 | 2 | 3 | 4 | 4 | 1437-105 |
| 12K-2 | Ring - diameter 7 mm (SMC and TSMC LP) | 0.001 | 2 | 3 | 4 | 3 | 1437-103 |
| 12L-1 | M10 x 30 hex head screw | 0.030 | 8 | 12 | 16 | 16 | 1424-192 |
| 12M-1 | Cover (TSMC HP only) | 0.800 | 1 | 3135-105 | |||
| 12N-1 | Cover gasket (TSMC HP only) | 0.010 | 1 | 2353-025 | |||
| 12P-1 | Lock nut - UNF 3/8” (TSMC HP only) | 0.010 | 1 | 1433-100 | |||
| 12Q-1 | M4 x 16 hexagon head screw (TSMC HP only) | 0.010 | 6 | 1413-007 | |||
| 12R-1 | PRP 112 12.37 x 2.62 O-ring rubber o-ring (TSMC HP only) *) | 0.001 | 1 | 1331-013 | |||
| 12S-1 | 100 x 100 x 2 gasket | 0.010 | 2 | 3 | 4 | 4 | 2354-023 |
| scheme | Discharge mechanism frame | ||||||
| Frame assembly incl. Position 13E-1 | 3184-216 | ||||||
| 13A-1 | Suspension rod | 0.290 | 2 | 3 | 4 | 4 | |
| 13B-1 | Suspension rod | 0.290 | 2 | 3 | 4 | 4 | |
| 13C-1 | Cross piece | 0.330 | 2 | 3 | 4 | 4 | |
| 13D-1 | Cross piece | 0.330 | 2 | 3 | 4 | 4 | |
| 13E-1 | M6 x 16 screw | 0.020 | 8 | 12 | 16 | 16 | 1413-092 |
| scheme | Discharge mechanism holder | ||||||
| 14A-1 | Holder with pin | 0.065 | 4 | 6 | 8 | 7 | 3135-060 |
| 14B-1 | The ring | 0.005 | 8 | 12 | 16 | 14 | 2124-003 |
| 14C-1 | M6 x 30 hex head screw | 0.010 | 8 | 12 | 16 | 14 | 1424-154 |
| 14D-1 | Spring washer - diam. 6 | 0.005 | 8 | 12 | 16 | 14 | 1437-022 |
| scheme | Unloading mechanism rocker | ||||||
| 15A-1 | Rocker | 0.050 | 8 | 12 | 16 | 16 | 3135-096 |
| 15B-1 | Bearing for SMC and TSMC LP | 0.006 | 8 | 12 | 16 | 12 | 3135-099 |
| 15B-2 | Bearing for TSMC HP | 0.006 | 4 | 3135-101 | |||
| 15C-1 | Spring lock | 0.001 | 8 | 12 | 16 | 16 | 2145-001 |
| 15D-1 | Spring | 0.007 | 8 | 12 | 16 | 16 | 2142-061 |
| 15E-1 | Washer - 0.5 mm | 0.001 | 2114-003 | ||||
| scheme | Crankshaft - all without a certificate | ||||||
| 16A-1 | Crankshaft for SMC 104S, complete | 42.400 | 1 | 3121-018 | |||
| 16A-2 | Crankshaft for SMC 106S, complete | 45.400 | 1 | 3121-019 | |||
| 16A-3 | Crankshaft for SMC 108S and TSMC 108S, complete | 47.600 | 1 | 1 | 3121-020 | ||
| 16A-4 | Crankshaft for SMC 104L, complete | 45.600 | 1 | 3121-104 | |||
| 16A-5 | Crankshaft for SMC 106L, complete | 47.800 | 1 | 3121-105 | |||
| 16A-6 | Crankshaft for SMC 108L and TSMC 108L, complete | 50.600 | 1 | 1 | 3121-106 | ||
| 16A-11 | Crankshaft for SMC 104E, complete | 1 | 3121-213 | ||||
| 16A-12 | Crankshaft for SMC 106E, complete | 1 | 3121-214 | ||||
| 16A-13 | Crankshaft for SMC 108E and TSMC 108E, complete | 1 | 1 | 3121-215 | |||
| 16B-1 | Washer plan with pin | 0.800 | 1 | 1 | 1 | 1 | 2125-084 |
| 16C-1 | Key - 18 x 11 x 55 | 0.080 | 1 | 1 | 1 | 1 | 2123-005 |
| 16D-1 | M16 x 55 hex head screw | 0.050 | 1 | 1 | 1 | 1 | 1424-104 |
| 16E-1 | Spring washer - diam. 16 | 0.004 | 1 | 1 | 1 | 1 | 1437-027 |
| 16F-1 | M12 S-type plug | 0.010 | 1 | 1 | 1 | 1 | 1413-260 |
| 16F-2 | 1/4” L-type plug | 0.010 | 3 | 3 | 3 | 3 | 1343-141 |
| scheme | Connecting rod | ||||||
| 17-1 | Connecting rod, SMC and TSMC LP assembly | 2.700 | 4 | 6 | 8 | 6 | 3123-004 |
| 17-2 | TSMC HP Connecting Rod Assembly | 2.700 | 2 | 3123-006 | |||
| 17A-1 | Connecting rod liner (half bearing) | 0.080 | 8 | 12 | 16 | 16 | 2133-003 |
| 17A-2 | Connecting rod (half bearing) (0.5 mm repair size) | 0.080 | 8 | 12 | 16 | 16 | 2133-004 |
| 17B-1 | SMC and TSMC LP piston pin bushing | 0.200 | 4 | 6 | 8 | 6 | 2132-004 |
| 17B-2 | TSMC HP Needle Bearing | 0.200 | 2 | 1511-275 | |||
| 17C-1 | Connecting rod bolt | 0.055 | 8 | 12 | 16 | 16 | 2111-068 |
| 17D-1 | Lock nut - 3/8” UNF | 0.010 | 8 | 12 | 16 | 16 | 1433-116 |
| scheme | Piston with finger and rings | ||||||
| 18-1 | Piston with finger and rings, type S | 1.320 | 4 | 6 | 8 | 8 | 3124-002 |
| 18-2 | Piston with finger and rings, type L | 1.320 | 4 | 6 | 8 | 8 | 3124-052 |
| 18-3 | Piston with finger and rings, type E | 1.320 | 4 | 6 | 8 | 8 | 3124-065 |
| 18A-1 | Piston pin | 0.500 | 4 | 6 | 8 | 8 | 3125-084 |
| 18B-1 | Piston (compression ring) | 0.025 | 8 | 12 | 16 | 16 | 3125-130 |
| 18C-1 | Oil scraper ring | 0.030 | 4 | 6 | 8 | 8 | 3125-065 |
| 18D-1 | Lock ring - diam. 40 (inner diameter) | 0.005 | 8 | 12 | 16 | 16 | 1437-150 |
| scheme | Cylinder bush (liner) with suction valve | ||||||
| 19-1 | Cylinder bush (liner) with suction valve R717, SMC - TSMC LP, S and L | 4.100 | 4 | 6 | 8 | 6 | 3112-085 |
| 19-5 | Cylinder bush (liner) with suction valve R717, SMC - TSMC LP, E | 4.500 | 4 | 6 | 8 | 6 | 3112-081 |
| 19-2 | Cylinder bush (liner) with HFC/HCFC suction valve, SMC - TSMC LP, S and L | 4.100 | 4 | 6 | 8 | 6 | 3112-086 |
| 19-3 | Cylinder bush (liner) with suction valve R717, SMC - TSMC HP, S and L | 4.100 | 2 | 3112-087 | |||
| 19-6 | Cylinder bush (liner) with suction valve R717, SMC - TSMC HP, E | 4.500 | 2 | 3112-097 | |||
| 19-4 | Cylinder bush (liner) with HFC/HCFC suction valve, TSMC HP, S and L | 4.100 | 2 | 3112-088 | |||
| 19A-1 | S and L cylinder bush (liner) | 3.500 | 4 | 6 | 8 | 8 | 3112-065 |
| 19A-2 | Cylinder bushing (liner), E | 4.000 | 4 | 6 | 8 | 8 | 3112-080 |
| 19B-1 | Discharge ring with pins, S and L | 0.400 | 4 | 6 | 8 | 8 | 3135-054 |
| 19B-2 | Discharge ring with pins, E | 0.500 | 4 | 6 | 8 | 8 | 3135-173 |
| 19C-1 | Washer - diam. 8/4.3 x 0.5 | 0.001 | 24 | 36 | 48 | 48 | 2114-001 |
| 19D-1 | Discharge ring spring | 0.001 | 24 | 36 | 48 | 48 | 2142-034 |
| 19E-1 | Spring - 342 mm | 0.015 | 4 | 6 | 8 | 8 | 2142-048 |
| 19F-1 | Suction Valve Ring Plate | 0.035 | 4 | 6 | 8 | 8 | 3131-021 |
| 19G-1 | Valve spring | 0.001 | 24 | 36 | 48 | 48 | 2141-047 |
| 19H-1 | R717 Suction Valve Retaining Plate | 1.400 | 4 | 6 | 8 | 8 | 3132-083 |
| 19H-2 | R12/R22 Suction Valve Retaining Plate | 1.400 | 4 | 6 | 8 | 8 | 3132-084 |
| 19J-1 | Guide ring for the discharge valve | 0.450 | 4 | 6 | 8 | 8 | 3134-008 |
| 19K-1 | Cylinder bush gasket (liner) - 0.5 mm | 0.005 | 4 | 6 | 8 | 8 | 2356-111 |
| 19K-2 | Cylinder bush gasket (liner) - 0.8 mm | 0.006 | 4 | 6 | 8 | 8 | 2356-233 |
| 19M-1 | TSMC HP O-Ring Rubber O-Ring 107.55 x 3.53*) | 0.002 | 2 | 1331-085 | |||
| 19N-1 | M6 x 30 hexagon head screw | 0.010 | 24 | 36 | 48 | 48 | 1413-343 |
| 19T-1 | Gasket - dia. 163/141 x 0.2 mm | 0.001 | 4 | 6 | 8 | 8 | 2353-140 |
| scheme | Discharge valve**) | ||||||
| 20-1 | Discharge valve - R717 - HP | 1.200 | 4 | 6 | 8 | 2 | 3136-089 |
| 20-2 | Discharge valve - R717 - LP | 1.200 | 4 | 6 | 8 | 6 | 3136-087 |
| 20-3 | Discharge valve - HFC/HCFC - HP | 1.200 | 4 | 6 | 8 | 2 | 3136-088 |
| 20-4 | Discharge valve - HFC/HCFC - LP | 1.200 | 4 | 6 | 8 | 6 | 3136-086 |
| 20-5 | Discharge valve - HFC/HCFC - VHP | 1.200 | 4 | 6 | 8 | 3136-085 | |
| 20A-1 | Discharge valve seat | 0.250 | 4 | 6 | 8 | 8 | 3133-027 |
| 20B-1 | Retaining plate - R717 - HP | 1.000 | 4 | 6 | 8 | 2 | 3132-092 |
| 20B-2 | Retaining plate - R717 - LP | 1.000 | 4 | 6 | 8 | 6 | 3132-090 |
| 20B-3 | Retaining plate - HFC/HCFC - HP | 1.000 | 4 | 6 | 8 | 2 | 3132-093 |
| 20B-4 | Retaining plate - HFC/HCFC - LP | 1.000 | 4 | 6 | 8 | 6 | 3132-091 |
| 20B-5 | Retaining plate - HFC/HCFC - VHP | 1.000 | 4 | 6 | 8 | 3132-094 | |
| 20C-1 | Discharge valve ring plate | 0.030 | 4 | 6 | 8 | 8 | 3131-015 |
| 20D-1 | M12 x 60 screw | 0.055 | 4 | 6 | 8 | 8 | 1413-121 |
| 20E-1 | M12 x 1.25 nut | 0.015 | 8 | 12 | 16 | 16 | 1432-075 |
| 20F-1 | Spring guide | 0.015 | 4 | 6 | 8 | 8 | 2145-008 |
| 20G-1 | Valve spring - R717 - HP | 0.001 | 32 | 48 | 64 | 16 | 2141-047 |
| 20G-1 | Valve spring - R717 - LP | 0.001 | 24 | 36 | 48 | 36 | 2141-047 |
| 20G-1 | Valve spring - HFC/HCFC - HP | 0.001 | 48 | 72 | 96 | 24 | 2141-047 |
| 20G-1 | Valve spring - HFC/HCFC - LP | 0.001 | 24 | 36 | 48 | 36 | 2141-047 |
| 20G-1 | Valve spring - HFC/HCFC - VHP | 0.001 | 64 | 96 | 128 | 2141-047 | |
| scheme | Spring for the safety head | ||||||
| 21-1 | Spring | 0.400 | 4 | 6 | 8 | 8 | 2142-060 |
| scheme | Oil pressure valve (pressure reducing valve) | ||||||
| 22A-1 | Oil pressure valve (pressure reducing valve), complete | 0.450 | 1 | 1 | 1 | 1 | 3142-150 |
| 22B-1 | 90 x 44 x 1 gasket | 0.001 | 1 | 1 | 1 | 1 | 2354-075 |
| 22C-1 | M12 x 35 hex head screw | 0.040 | 2 | 2 | 2 | 2 | 1424-216 |
| scheme | Oil filling valve | ||||||
| 23A-1 | Oil filling valve assembly | 0.300 | 1 | 1 | 1 | 1 | 2412-585 |
| 23B-1 | Thread nipple | 0.155 | 1 | 1 | 1 | 1 | 2311-059 |
| 23C-1 | Adapter | 0.075 | 1 | 1 | 1 | 1 | 2313-035 |
| 23D-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-123 |
| 23E-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-140 |
| 23F-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-283 |
| 23G-1 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
| scheme | Safety (bypass) valves | ||||||
| 24-1 | Safety (bypass) valve dia. 20 (TSMC 108 HP) 22 bar | 2.400 | 1 | 3137-033 | |||
| 24-2 | Safety (bypass) valve dia. 20 (TSMC 108 HP) 24 bar | 2.400 | 1 | 3137-010 | |||
| 24-4 | Safety (bypass) valve dia. 28 (TSMC 108 LP) 14 bar | 3.600 | 1 | 3137-046 | |||
| 24-5 | Safety (bypass) valve dia. 28 (SMC) 22 bar | 3.600 | 1 | 1 | 1 | 3137-007 | |
| 24-7 | Safety (bypass) valve dia. 28 (SMC) 24 bar | 3.600 | 1 | 1 | 1 | 3137-009 | |
| 24B-1 | Cylinder sealing ring*) | 0.001 | 1 | 1331-065 | |||
| 24B-4 | Cylinder sealing ring*) | 0.002 | 1 | 1 | 1 | 1 | 1331-067 |
| 24C-1 | O-ring rubber sealing ring*) | 0.002 | 1 | 1331-069 | |||
| 24C-4 | O-ring rubber sealing ring*) | 0.003 | 1 | 1 | 1 | 1 | 1331-071 |
| 24D-1 | M8 x 25 hex head screw | 0.015 | 4 | 4 | 4 | 8 | 1424-168 |
| 24E-1 | Spring washer diameter 14.2/8.2 x 2 | 0.002 | 4 | 4 | 4 | 8 | 1437-023 |
| Position on the chart | Description | Part weight in kg. | Quantity for each compressor | Catalogue number | |||
| SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
| Pressure gauges | |||||||
| scheme | Suction pressure gauges | ||||||
| 30A-1 | R717 | 1.640 | 1 | 1 | 1 | 1 | 1541-108 |
| 30A-2 | R12, R22 and R502 | 1.620 | 1 | 1 | 1 | 1 | 1541-232 |
| 30A-3 | R22, R134a and R404A | 1.620 | 1 | 1 | 1 | 1 | 1541-074 |
| 30B-1 | Diaphragm dia. 14/0.8 x 1.5 | 0.001 | 1 | 1 | 1 | 1 | 3146-013 |
| 30C-1 | Gasket dia. 11/4 x 1.5 | 0.001 | 1 | 1 | 1 | 1 | 2356-119 |
| scheme | SMC: pressure gauge | ||||||
| 31A-1 | R717 | 1.380 | 1 | 1 | 1 | 1541-029 | |
| 31A-2 | R12, R22 and R502 | 1.400 | 1 | 1 | 1 | 1541-160 | |
| 31A-3 | R22, R134a and R404A | 1.400 | 1 | 1 | 1 | 1541-075 | |
| 31B-1 | Diaphragm dia. 14/0.8 x 1.5 | 0.001 | 1 | 1 | 1 | 3146-013 | |
| scheme | TSMC: pressure gauge | ||||||
| 31A-3 | R717 | 1.600 | 1 | 1541-101 | |||
| 31A-4 | R12, R22 and R502 | 1.660 | 1 | 1541-161 | |||
| 31A-5 | R22, R134a and R404A | 1.660 | 1 | 1541-076 | |||
| 31B-1 | Diaphragm dia. 14/0.8 x 1.5 | 0.001 | 2 | 3146-013 | |||
| 31C-1 | M4 x 20 pressure gauge screws | 6 | 6 | 6 | 6 | 1412-350 | |
| scheme | Oil filter | ||||||
| 33-1 | Oil filter assembly (33A,33B.33L,33M) | 1 | 1 | 1 | 1 | 3084-539 | |
| 33A-1 | Filter element | 1 | 1 | 1 | 1 | 1517-129 | |
| 33B-1 | Gasket | 1 | 1 | 1 | 1 | 2356-202 | |
| 33F-1 | Fastening with a connection | 1 | 1 | 1 | 1 | 3422-152 | |
| 33L-1 | Washer diameter 17/8.4 | 1 | 1 | 1 | 1 | 1436-034 | |
| 33M-1 | M8 nut | 1 | 1 | 1 | 1 | 1433-073 | |
| 33R-1 | Adapter | 1 | 1 | 1 | 1 | 1349-131 | |
| scheme | Suction filter | ||||||
| 34A-1 | Open suction filter, complete | 0.365 | 2 | 2 | 2 | 1 | 3425-082 |
| 34A-2 | Suction filter, closed, complete | 0.365 | 1 | 3425-084 | |||
| 34B-1 | Filter bag | 0.035 | 2 | 2 | 2 | 2 | 3425-083 |
| 34C-1 | Filter bag insert | 0.025 | 2 | 2 | 2 | 2 | 3424-058 |
| 34D-1 | PRP 337 O-Ring Rubber O-Ring - 75.56 x 5.33 *) | 0.008 | 2 | 2 | 2 | 3 | 1331-042 |
| 34E-1 | Suction filter cover | 2.400 | 2 | 2 | 2 | 1 | 3422-103 |
| 34F-1 | PRP 239 O-Ring Rubber O-Ring - 91.67 x 3.53 *) | 0.003 | 2 | 2 | 2 | 1 | 1331-080 |
| 34G-1 | M12 x 40 hex head screw | 0.050 | 8 | 8 | 8 | 4 | 1424-217 |
| 34H-1 | Spring washer dia. 12 | 0.005 | 8 | 8 | 8 | 4 | 1437-026 |
| scheme | Oil filter discharge pipe | ||||||
| 38A-1 | Oil pump discharge pipe | 0.500 | 1 | 1 | 1 | 1 | 3141-110 |
| 38B-1 | Internal connection for the control system (compressor without oil cooler) | 0.090 | 1 | 1 | 1 | 1 | 3141-162 |
| 38B-2 | Internal connection for the control system (compressor with OSSI oil cooler R717) | 0.090 | 1 | 1 | 1 | 1 | 3141-163 |
| 28B-3 | Internal connection for the control system (compressor with HE8 HCFC oil cooler) | 0.090 | 1 | 1 | 1 | 1 | 3141-164 |
| 38C-1 | Discharge pipe connection - SMC 104 | 0.120 | 1 | 2333-025 | |||
| 38C-2 | Discharge pipe connection - SMC 106 | 0.190 | 1 | 2333-025 | |||
| 38C-3 | Discharge pipe connection - SMC 108 and TSMC 108 | 0.180 | 1 | 1 | 2333-026 | ||
| 38D-1 | PRP 212 O-Ring Rubber O-Ring - 21.80 x 3.53*) | 0.002 | 2 | 2 | 2 | 2 | 1331-020 |
| 38E-1 | PRP 321 O-Ring Rubber O-Ring - 29.51 x 5.33*) | 0.004 | 1 | 1 | 1 | 1 | 1331-039 |
| 38F-1 | Gasket dia. 27/21 x 1.5 | 0.001 | 1 | 1 | 1 | 1 | 2356-133 |
| 38G-1 | O-ring rubber sealing ring dia. 26.58 x 3.5*) | 0.002 | 1 | 1 | 1 | 1 | 1331-023 |
| scheme | Analogue and security equipment | ||||||
| 39A-1 | Pressure gauge panel | 0.070 | 1 | 1 | 1 | 1 | 3146-042 |
| 39B-1 | M10 x 60 hexagon head screw | 0.045 | 2 | 2 | 2 | 2 | 1413-382 |
| 39C-1 | Fasteners | 1 | 1 | 1 | 1 | 2213-142 | |
| 39D-1 | Controller mount (4 controllers) | 1 | 1 | 1 | 2213-143 | ||
| 39D-2 | Controller mount (5 controllers) | 1 | 1 | 1 | 1 | 2213-144 | |
| 39D-3 | Controller mount (6 controllers) | 1 | 1 | 1 | 1 | 2213-145 | |
| 39D-4 | Controller mount (7 controllers) | 1 | 1 | 1 | 1 | 2213-154 | |
| 39D-5 | Controller mount (US, SMC) | 1 | 1 | 1 | 2213-368 | ||
| 39D-6 | Controller mount (US, TSMC) | 1 | 2213-369 | ||||
| 39E-1 | M6 x 12 hex head screw | 2 | 2 | 2 | 2 | 1424-150 | |
| 39F-1 | Spring washer diameter 11/6 | 2 | 2 | 2 | 2 | 1437-022 | |
| 39G-1 | M4 x 6 hexagon head screw | 1412-200 | |||||
| 39H-1 | 7/4 diameter spring washer | 1437-020 | |||||
| 39J-1 | M5 x 10 hexagon head screw | 4 | 4 | 4 | 4 | 1413-330 | |
| 39K-1 | Spring washer diameter 9/5 | 4 | 4 | 4 | 4 | 1437-021 | |
| scheme | Water cooling connections | ||||||
| 40A-1 | SMC 104 water cooling hose set | 1 | 3185-230 | ||||
| 40A-2 | SMC 106 water cooling hose set | 1 | 3185-231 | ||||
| 40A-3 | SMC 108 and TSMC 108 water cooling hose set | 1 | 1 | 3185-232 | |||
| 40A-4 | SMC 108 for side cover only | 3185-235 | |||||
| scheme | Stop valve | ||||||
| 42A-1 | Stop valve | 0.300 | 1 | 1 | 1 | 2 | 2412-585 |
| 42B-1 | Thread nipple | 1 | 1 | 1 | 1 | 1349-078 | |
| 42C-1 | Adapter | 0.135 | 1 | 1 | 1 | 2 | 1349-062 |
| 42D-1 | Nut | ||||||
| 42E-1 | Nut | 0.070 | 1 | 1 | 1 | 2 | 2313-045 |
| 42F-1 | Connecting pipe | 0.025 | 1 | 1 | 1 | 2 | 2334-027 |
| 42G-1 | Gasket | 0.001 | 2 | 2 | 2 | 4 | 2356-123 |
| 42H-1 | Nut | 0.060 | 1 | 1 | 1 | 2 | 2313-027 |
| scheme | Pressure and temperature devices | ||||||
| Pressure devices for R717 | |||||||
| 45A-1 | KP 5A | 0.300 | 1 | 1 | 1 | 1 | 1373-125 |
| 45B-1 | KP 15A | 0.460 | 1 | 1 | 1 | 1 | 1373-142 |
| 45C-1 | MP 55A | 0.900 | 1 | 1 | 1 | 1 | 1373-162 |
| 42F-1 | Connecting pipe | 0.025 | 1 | 1 | 1 | 1 | 2334-027 |
| 42G-1 | Gasket | 0.001 | 2 | 2 | 2 | 2 | 2356-123 |
| 42H-1 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
| Pressure devices for R22, R134a and R404A | |||||||
| 45D-1 | KP 5 | 0.300 | 1 | 1 | 1 | 1 | 1373-123 |
| 45E-1 | KP 15 | 0.460 | 1 | 1 | 1 | 1 | 1373-135 |
| 45F-1 | MP 55 | 0.800 | 1 | 1 | 1 | 1 | 1373-159 |
| Temperature devices: | |||||||
| 45G-1 | KP 98 | 0.720 | 1 | 1 | 1 | 1 | 1373-043 |
| 45H-1 | KP 77 | 0.350 | 1 | 1 | 1 | 1 | 1373-044 |
| 45J-1 | Temperature sensor case | 0.770 | 1 | 1 | 1 | 1 | 1377-171 |
| 45K-1 | Gasket | 1 | 1 | 1 | 1 | 2356-133 | |
| scheme | AMR 312 S clutch | ||||||
| 48A-4 | Plate package | 1.132 | 2 | 2 | 2 | 2 | 1524-157 |
| 48B-4 | Bolt | 0.054 | 16 | 16 | 16 | 16 | 1524-165 |
| 48C-4 | Beveled washer | 0.010 | 4 | 4 | 4 | 4 | 1524-187 |
| 48D-4 | Lock nut | 0.018 | 16 | 16 | 16 | 16 | 1524-173 |
| 48E-4 | washer | 0.008 | 16 | 16 | 16 | 16 | 1524-181 |
| scheme | Performance control | ||||||
| 50A-1 | Valve body with 1 solenoid valve without coil | 1 | 3143-383 | ||||
| 50A-2 | Valve body with 2 solenoid valves without coils | 1 | 1 | 3143-384 | |||
| 50A-3 | Valve body with 3 solenoid valves without coils | 1 | 3143-385 | ||||
| 50A-4 | Valve body with 4 solenoid valves without coils | 1 | 3143-386 | ||||
| 50B-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | ||||
| 50B-2 | 110V coil, 50/60 Hz, 10 W | 0.260 | 1372-538 | ||||
| 50B-3 | 240V coil, 50 Hz, 10 W | 0.062 | 1372-539 | ||||
| 50C | Solenoid valve (service kit for one solenoid valve) | 1372-424 | |||||
| scheme | Crankcase heater (heater) | ||||||
| 57A-1 | Crankcase heater (heater) - 270W - 115V, 1 1/4” BSP | 1 | 1 | 1 | 1 | 3181-034 | |
| 57A-2 | Crankcase heater (heater) - 270W - 230V, 1 1/4” BSP | 1 | 1 | 1 | 1 | 3181-035 | |
| 57A-3 | Crankcase heater (heater) - 270W - 250V, 1 1/4” BSP | 1 | 1 | 1 | 1 | 3181-036 | |
| 57B-1 | Cuff diameter 42/49 x 6.5 | 0.022 | 1 | 1 | 1 | 1 | 1349-213 |
| 80 | Solenoid valve unit, oil return assembly with 0.6 mm diaphragm without coil | 2.040 | 1 | 1 | 1 | 1 or 2 | 1372-179 |
| scheme | Coarse filter kit Consists of: | 1 | 1 | 1 | 1 or 2 | 1372-089 | |
| 80E | coarse filter | ||||||
| 80G | Aluminum gasket | ||||||
| scheme | The oil return solenoid valve unit service kit consists of: | 1 | 1 | 1 | 1 or 2 | 1372-086 | |
| 80P | Armature tube | ||||||
| 80H | Armature | ||||||
| 80K | O-ring rubber seal | ||||||
| 80M | O-ring rubber seal | ||||||
| 80L | Aluminum gasket | ||||||
| 80N | Snap fastener | ||||||
| scheme | Seal kit Consists of: | 1 | 1 | 1 | 1 or 2 | 1372-091 | |
| 80G | Aluminum gasket | ||||||
| 80K | O-ring rubber seal | ||||||
| 80M | O-ring rubber seal | ||||||
| 80L | Aluminum gasket | ||||||
| 80Q | Aluminum gasket | ||||||
| Position on the chart | Description | Part weight in kg. | Quantity for each compressor | Catalogue number | |||
| SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
| scheme | 0.6 mm diaphragm kit Consists of: | 1 | 1 | 1 | 1 or 2 | 1371-034 | |
| 80L | Aluminum gasket | ||||||
| 80Q | Aluminum gasket | ||||||
| 80I | 0.6 mm diaphragm | ||||||
| scheme | 0.8 mm diaphragm kit Consists of: | 1 | 1 | 1 | 1 or 2 | 1371-035 | |
| 80L | Aluminum gasket | ||||||
| 80Q | Aluminum gasket | ||||||
| 80I | 0.8 mm diaphragm | ||||||
| scheme | 1.0 mm diaphragm kit Consists of: | 1 | 1 | 1 | 1 or 2 | 1371-036 | |
| 80L | Aluminum gasket | ||||||
| 80Q | Aluminum gasket | ||||||
| 80I | 1.0 mm diaphragm | ||||||
| scheme | 3.3 mm diaphragm kit (heat pump only) Consists of: | 1 | 1 | 1 | 1 or 2 | 1371-037 | |
| 80L | Aluminum gasket | ||||||
| 80Q | Aluminum gasket | ||||||
| 80I | 3.3 mm diaphragm | ||||||
| 80J-1 | 220/230V, 50/60Hz, 10W coil | 0.285 | 1372-537 | ||||
| 80J-2 | 110V, 50/60Hz, 10W coil | 0.285 | 1372-538 | ||||
| 80J-3 | 240V, 50Hz, 10W coil | 0.285 | 1372-539 | ||||
| 80J-4 | 24V, 50Hz, 10W coil | 0.285 | 1372-541 | ||||
| scheme | Intermediate pressure connections | ||||||
| 90A-1 | Mixing chamber with flange | 9.500 | 1 | 3114-095 | |||
| 90B-1 | Counter flange for the mixing chamber | 1.700 | 1 | 3115-084 | |||
| 90C-1 | Intermediate ring | 0.392 | 1 | 3422-100 | |||
| 90D-1 | PRP 236 - 82.15 3.53 round rubber sealing ring *) | 0.002 | 1 | 1331-077 | |||
| 90E-1 | PRP 241 O-Ring Rubber O-Ring - 98.02 x 3.5*) | 0.002 | 1 | 1331-081 | |||
| 90F-1 | M12 x 65 hex head screw | 0.065 | 4 | 1424-222 | |||
| 90G-1 | M14 x 55 hex head screw | 0.065 | 4 | 1424-246 | |||
| 90H-1 | Spring washer dia. 12 | 0.005 | 4 | 1437-026 | |||
| 90J-1 | Spring washer dia. 14 | 0.004 | 4 | 1437-030 | |||
| 90K-1 | M14 nut | 0.025 | 4 | 1432-066 | |||
| 90L-1 | PRP 239 O-Ring Rubber O-Ring - 91.67 x 3.53 *) | 0.003 | 1 | 1331-080 | |||
| 90M-1 | Plug | 0.065 | 1 |
2313-027 |
|||
| 90N-1 | Gasket dia. 18/10 x 1.5 | 0.002 | 1 | 2356-123 | |||
| scheme | Oil cooling - HE8 S type for R22 | ||||||
| 92A-1 | Oil cooler | 1 | 1 | 1 | 1 | 4242-038 | |
| 92B-1 | BMSL 10 stop valve | 0.300 | 1 | 1 | 1 | 1 | 1374-171 |
| 92C-1 | TX 2 - 0.5 thermostatic valve | 0.400 | 1 | 1 | 1 | 1 | 1371-305 |
| 92D-1 | Solenoid valve without coil | 0.346 | 1 | 1 | 1 | 1 | 1372-422 |
| 92N-1 | 220/230V, 50/60Hz, 10W coil | 0.260 | 1372-537 | ||||
| 92N-2 | 110V, 50/60Hz, 10W coil | 0.260 | 1372-538 | ||||
| 92N-3 | 240V, 50Hz, 10W coil | 0.260 | 1372-539 | ||||
| 92E-1 | filter | 0.320 | 1 | 1 | 1 | 1 | 4522-002 |
| 92F-1 | GE 10-LR 1/4" screw connection | 0.050 | 6 | 6 | 6 | 6 | 1349-051 |
| 92G-1 | DSVW 10-LR connector | 0.160 | 1 | 1 | 1 | 1 | 1349-089 |
| 92H-1 | Thread nipple | 0.110 | 1 | 1 | 1 | 1 | 2314-056 |
| 92J-1 | Screw plug for 8/6 mm pipe | 0.015 | 2 | 2 | 2 | 2 | 2314-053 |
| 92K-1 | Gasket dia. 19/14 x 1.5 - aluminium | 0.001 | 8 | 8 | 8 | 8 | 2356-124 |
| 92L-1 | Connection for 1 pipe with a diameter of 8 mm | 0.030 | 2 | 2 | 2 | 2 | 2333-021 |
| 92M-1 | Gasket - diam. 27/21 x 1.5 - aluminium | 0.001 | 3 | 3 | 3 | 3 | 2356-133 |
| scheme | Oil cooling - OOSI type for R717 | ||||||
| 93A-1 | Oil cooler | 1 | 1 | 1 | 1 | 4242-029 | |
| 93B-1 | SN 6 stop valve | 1 | 1 | 1 | 1 | 2413-010 | |
| 93C-1 | TEAT 20-2 thermostatic valve | 0.400 | 1 | 1 | 1 | 1 | 1371-240 |
| 93D-1 | solenoid valve without coil | 0.346 | 1 | 1 | 1 | 1 | 1372-422 |
| 93N-1 | 220/230V, 50/60Hz, 10W coil | 0.260 | 1372-537 | ||||
| 93N-2 | 110V, 50/60Hz, 10W coil | 0.260 | 1372-538 | ||||
| 93N-3 | 240V, 50Hz, 10W coil | 0.260 | 1372-539 | ||||
| 93E-1 | filter | 0.320 | 1 | 1 | 1 | 1 | 4522-002 |
| 93F-1 | GE 10-LR 1/4" screw connection | 0.050 | 6 | 6 | 6 | 6 | 1349-051 |
| 93G-1 | DSVW 10-LR connector | 0.160 | 1 | 1 | 1 | 1 | 1349-089 |
| 93H-1 | Thread nipple | 0.110 | 1 | 1 | 1 | 1 | 2314-056 |
| 93J-1 | Screw plug for diameter 8/6 mm pipe | 0.015 | 4 | 4 | 4 | 4 | 2314-053 |
| 93K-1 | Gasket dia. 19/14 x 1.5 - alunimium | 0.001 | 8 | 8 | 8 | 8 | 2356-124 |
| 93L-1 | Connection for 1 pipe with a diameter of 8 mm | 0.030 | 4 | 4 | 4 | 4 | 2333-021 |
| 93M-1 | Gasket dia. 27/21 x 1.5 - aluminium | 0.001 | 3 | 3 | 3 | 3 | 2356-133 |
| scheme | Oil pump chain drive | ||||||
| Chain drive assembly | 3141-127 | ||||||
| 96A-1 | Gear Hub (crankshaft) | 1 | 1 | 1 | 1 | 2126-020 | |
| 96B-1 | Gear Hub (Oil pump) | 1 | 1 | 1 | 1 | 2126-019 | |
| 96C-1 | Gear (crankshaft) | 1 | 1 | 1 | 1 | 2126-018 | |
| 96D-1 | Gear (Oil pump) | 1 | 1 | 1 | 1 | 2126-017 | |
| 96E-1 | Chain | 1 | 1 | 1 | 1 | 1521-102 | |
| 96F-1 | Hex head screw | 5 | 5 | 5 | 5 | 1424-150 | |
| 96G-1 | Spring washer | 5 | 5 | 5 | 5 | 1437-022 | |
| 96H-1 | Oil shield | 1 | 1 | 1 | 1 | 3141-128 | |
| 98 | Heat pump | ||||||
| 98A-1 | Side cover for heat pump | 1 | 1 | 1 | 1 | 3113-145 | |
| 98B-1 | Heat pump controller | 1 | 1 | 1 | 1 | 1553-215 | |
| M4 x 16 screw | 2 | 2 | 2 | 2 | 1412-204 | ||
| Spring washer dia. 4 | 2 | 2 | 2 | 2 | 1437-020 | ||
| 98C-1 | Level indicator | 2 | 2 | 2 | 2 | 3185-038 | |
| 98D-1 | The outer part of the level indicator | 2 | 2 | 2 | 2 | 3185-034 | |
| 98E-1 | Washer diameter 20/13 x 1.5 | 2 | 2 | 2 | 2 | 2356-125 | |
| 98F-1 | Rubber plug | 2 | 2 | 2 | 2 | 1554-194 | |
| 98G-1 | solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-422 | |
| 98H-1 | solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-423 | |
| 98J-1 | 220/230V, 50/60Hz, 10W coil | 0.285 | 1372-537 | ||||
| 98J-2 | 110V, 50/60Hz, 10W coil | 0.285 | 1372-538 | ||||
| 98J-3 | 240V, 50Hz, 10W coil | 0.285 | 1372-539 | ||||
| 98K-1 | Reverse valve | 2 | 2 | 2 | 2 | 1364-008 | |
| 10mm BSP Direct Connection | 6 | 6 | 8 | 5 | 1349-051 | ||
| 10 mm BSP adapter | 5 | 5 | 4 | 4 | 1349-101 | ||
| T-shaped connector 10 mm | 3 | 4 | 5 | 1 | 1349-041 | ||
| Stop valve holder | 1 | 1 | 1 | 1 | 2212-059 | ||
| No.10 cable connector | 1 | 1 | 1 | 1 | 1554-054 | ||
| M4 x 12 screw | 2 | 2 | 2 | 2 | 1412-203 | ||
| M4 nut | 2 | 2 | 2 | 2 | 1432-035 | ||
| 98L-1 | Washer dia. 29/21 x 1.5 | 2 | 2 | 2 | 2 | 2356-136 | |
| 98M-1 | VA connector with 1.2 mm nozzle | 3 | 4 | 5 | 2314-097 | ||
| 98M-2 | VA connector with 0.6 mm nozzle | 1 | 2314-100 | ||||
| Angle connector | 3 | 3 | 2 | 1 | 1349-033 | ||
| 8 mm angle connector | 4 | 4 | 4 | 1349-087 | |||
| 10 mm angle connector | 3 | 3 | 2 | 1 | 1349-089 | ||
| 10 mm angle connector | 1 | 1349-112 | |||||
| 1/4” x 1/2” RG bush | 2 | 1 | 1 | 2312-013 | |||
| Thread nipple | 1 | 1 | 2314-056 | ||||
| Gasket dia. 27/21 x 1.5 Al | 2 | 2 | 2 | 2356-133 | |||
| Gasket dia. 19/14 x 4 Al | 3 | 3 | 3 | 1 | 2356-283 | ||
| tube holder diam. 10 x 15 | 2 | 1 | 1377-117 | ||||
| M6 x 12 hex head installation screw | 1 | 1424-150 | |||||
| M6 nut | 1 | 1432-061 | |||||
| M5 x 10 screw | 1 | 1413-330 | |||||
| Washer diameter 12.5/6.4 x 1.6 | 2 | 1436-033 | |||||
| Spring Washer M6 | 1 | 1437-021 | |||||
| 98N-1 | filter | 1 | 1 | 1 | 1 | 4522-002 | |
| 98P-1 | Stop valve | 1 | 1 | 1 | 1 | 2412-277 | |
| 98Q-1 | Cooler cover | 1 | 1 | 1 | 1 | 3113-143 | |
| 98R-1 | Side cover gasket | 1 | 1 | 1 | 1 | 2353-151 | |
| 98S-1 | M14 x 80 hex head screw | 16 | 16 | 16 | 16 | 1424-081 | |
| 98T-1 | OSSI oil cooler | 1 | 1 | 1 | 1 | 4242-029 | |
| 1/4" adapter | 1 | 1 | 1 | 1 | 1349-101 | ||
| 98U | solenoid valve without coil | 1 | 1 | 1 | 1372-422 | ||
| 98V | solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-422 | |
| 98AB-1 | 220/230V, 50/60Hz, 10W coil | 0.285 | 1372-537 | ||||
| 98AB-2 | 110V, 50/60Hz, 10W coil | 0.285 | 1372-538 | ||||
| 98AB-3 | 240V, 50Hz, 10W coil | 0.285 | 1372-539 | ||||
| 98X | PT100 sensor | 1 | 1 | 1 | 1 | 1373-253 | |
| 98Y | Stop valve | 1 | 1 | 1 | 1 | 2412-277 | |
| 98Z | Stop valve | 1 | 1 | 1 | 1 | 1364-022 | |
| 98AA | Adapter | 1 | 1 | 1 | 1 | 2314-105 | |
| scheme | UNISAB controller | ||||||
| 99A-1 | Fasteners for UNISAB | 1 | 1 | 1 | 1 | 2213-500 | |
| 99B-3 | PTFE washer | 4 | 4 | 4 | 4 | 2212-130 | |
| 99C-1 | M10 x 20 fastening screw | 2 | 2 | 2 | 2 | 1424-190 | |
| 99D-1 | Screw for UNISAB M6 x 20 | 4 | 4 | 4 | 4 | 1424-152 | |
| 99E-1 | Washer diameter 22/7 x 1.5 | 4 | 4 | 4 | 4 | 1436-025 | |
| Position on the chart | Description | Part weight in kg. | Valve diameter | Quantity for each compressor | Catalogue number | |||
| SMC 104 | SMC 106 | SMC 108 | TSMC 108 | |||||
| scheme | Stop valves | |||||||
| 25-1 | Valve assembly, HP injection | 50 | 1 | 2414-073 | ||||
| 25-2 | Valve assembly, HP suction | 50 | 1 | 2411-261 | ||||
| 25-3 | Valve assembly, LP injection | 65 | 1 | 1 | 1 | 1 | 2414-069 | |
| 25-4 | Valve assembly, LP suction | 100 | 1 | 1 | 1 | 1 | 2414-070 | |
| 25A-1 | Valve body | 50 | 1 | 2432-141 | ||||
| 25A-2 | Valve body | 50 | 1 | 2432-141 | ||||
| 25A-3 | Valve body | 65 | 1 | 1 | 1 | 1 | 2432-159 | |
| 25A-4 | Valve body | 100 | 1 | 1 | 1 | 1 | 2432-160 | |
| 25B-1 | Valve cover | 1.740 | 50-65 | 1 | 1 | 1 | 3 | 2433-028 |
| 25B-4 | Valve cover | 4.500 | 100 | 1 | 1 | 1 | 1 | 2433-030 |
| 25C-1 | The front of the cone | 0.095 | 50-65 | 1 | 1 | 1 | 3 | 2444-090 |
| 25C-3 | The front of the cone | 0.520 | 100 | 1 | 1 | 1 | 1 | 2444-094 |
| 25D-1 | The back of the cone | 0.185 | 50-65 | 1 | 1 | 1 | 3 | 2444-091 |
| 25D-4 | The back of the cone | 1.000 | 100 | 1 | 1 | 1 | 1 | 2444-095 |
| 25E-1 | Screw | 0.020 | 50-65 | 1 | 1 | 1 | 3 | 2444-017 |
| 25E-4 | Screw | 0.120 | 100 | 1 | 1 | 1 | 1 | 2444-018 |
| 25F-1 | Screw gasket diameter 31/24 x 1.5 | 0.0001 | 50-65 | 1 | 1 | 1 | 3 | 2356-138 |
| 25F-4 | Screw gasket dia. 36/28 x 1.5 | 0.001 | 100 | 1 | 1 | 1 | 1 | 2356-141 |
| 25G-1 | Screw connection | 0.180 | 50-65 | 1 | 1 | 1 | 3 | 2445-053 |
| 25G-4 | Screw connection | 0.400 | 100 | 1 | 1 | 1 | 1 | 2445-061 |
| 25H-1 | O-ring diam. 62/45 x 3 | 0.004 | 50-65 | 1 | 1 | 1 | 3 | 2354-003 |
| 25H-4 | O-ring diameter 110/90 x 3 | 0.020 | 100 | 1 | 1 | 1 | 1 | 2354-117 |
| 25J-1 | Cover gasket dia. 72.39 x 5.33 | 0.010 | 50-65 | 1 | 1 | 1 | 3 | 1331-154 |
| 25J-4 | Cover gasket dia. 116.84 x 7 | 0.015 | 100 | 1 | 1 | 1 | 1 | 1331-198 |
| 25K-1 | Rod | 0.250 | 50-65 | 1 | 1 | 1 | 3 | 2442-023 |
| 25K-4 | Rod | 0.480 | 100 | 1 | 1 | 1 | 1 | 2442-028 |
| 25L-1 | Locking plate | 0.010 | 50-65 | 1 | 1 | 1 | 3 | 2445-019 |
| 25L-4 | Locking plate | 0.015 | 100 | 1 | 1 | 1 | 1 | 2445-020 |
| 25M-1 | Gland seal assembly with rubber o-rings Position 25R-1 | 0.120 | 50-65 | 1 | 1 | 1 | 3 | 2452-073 |
| 25M-4 | Gland seal assembly with rubber o-rings Position 25R-4 | 0.250 | 100 | 1 | 1 | 1 | 1 | 2452-004 |
| 25N-1 | Guide pin | 0.002 | 50-65 | 1 | 1 | 1 | 3 | 1445-085 |
| 25N-4 | Guide pin | 0.002 | 100 | 1 | 1 | 1 | 1 | 1445-085 |
| 25P-1 | O-ring rubber sealing ring dia. 21.8 x 3.5*) | 0.002 | 50-65 | 1 | 1 | 1 | 3 | 1331-020 |
| 25P-4 | O-ring rubber sealing ring dia. 28.2 x 3.5*) | 0.002 | 100 | 1 | 1 | 1 | 1 | 1331-024 |
| 25Q-1 | PTFE washer diameter 28.5/28 x 1.5 | 0.001 | 50-65 | 1 | 1 | 1 | 3 | 2354-018 |
| 25Q-4 | PTFE washer diameter 48/34 x 1.5 | 0.002 | 100 | 1 | 1 | 1 | 1 | 2354-017 |
| 25R-1 | O-ring rubber sealing ring dia. 17.12 x 3.5*) | 0.001 | 50-65 | 2 | 2 | 2 | 2 | 1331-016 |
| 25R-4 | O-ring rubber sealing ring dia. 21.8 x 3.5 | 0.002 | 100 | 2 | 2 | 2 | 2 | 1331-020 |
| 25S-1 | Valve diameter 120 | 0.160 | 50-65 | 1 | 1 | 1 | 3 | 1365-036 |
| 25S-4 | Valve diameter 180 | 0.800 | 100 | 1 | 1 | 1 | 1 | 1365-035 |
| 25T-1 | Valve screw M5 x 10 | 0.002 | 50-65 | 1 | 1 | 1 | 3 | 1424-140 |
| 25T-4 | M8 x 16 valve screw | 0.010 | 100 | 1 | 1 | 1 | 1 | 1424-166 |
| 25U-1 | Valve Washer | 0.001 | 50-65 | 1 | 1 | 1 | 3 | 1436-024 |
| 25U-4 | Valve Washer | 0.003 | 100 | 1 | 1 | 1 | 1 | 1436-026 |
| 25Y-3 | Nipple gasket for welding | 0.015 | 50-65 | 1 | 1 | 1 | 1 | 2356-087 |
| 25Y-4 | Nipple gasket for welding | 0.025 | 100 | 1 | 1 | 1 | 1 | 2356-104 |
| 25Z-1 | Screw valve/compressor M14 x 40 | 0.050 | 50 | 4 | 4 | 4 | 4 | 1424-241 |
| 25Z-3 | Screw valve/compressor M14 x 45 | 0.050 | 65 | 4 | 4 | 4 | 4 | 1424-242 |
| 25Z-4 | Screw valve/compressor M16 x 45 | 0.095 | 100 | 4 | 4 | 4 | 4 | 1424-102 |
| 25AC-3 | Counter flange | 65 | 1 | 1 | 1 | 1 | 2344-019 | |
| 25AC-4 | Counter flange | 100 | 1 | 1 | 1 | 1 | 2344-020 | |
| 25AD-3 | Welding nipple dia. 65 | 65 | 1 | 1 | 1 | 1 | 2322-103 | |
| 25AD-4 | Welding nipple diam. 100 | 100 | 1 | 1 | 1 | 1 | 2322-108 | |
| 25AF-3 | 3/4” BSP screw plug | 65 | 1 | 1 | 1 | 1 | 2314-065 | |
| 25AF-4 | 3/4” BSP screw plug | 100 | 1 | 1 | 1 | 1 | 2314-065 | |
| 25AG-1 | Valve/compressor gasket | 0.016 | 50 | 1 | 2354-105 | |||
| 25AG-3 | Valve/compressor gasket | 0.016 | 65 | 1 | 1 | 1 | 1 | 2354-105 |
| 25AG-4 | Valve/compressor gasket | 0.020 | 100 | 1 | 1 | 1 | 1 | 2354-106 |
| 25AH-3 | Plug gasket | 0.002 | 65 | 1 | 1 | 1 | 1 | 2356-139 |
| 25AH-4 | Plug gasket | 0.002 | 100 | 1 | 1 | 1 | 1 | 2356-139 |
| 25AJ-1 | Screw cap/valve M10 x 25 | 50 | 8 | 1424-191 | ||||
| 25AJ-2 | Screw cap/valve M10 x 25 | 50 | 8 | 1424-191 | ||||
| 25AJ-3 | Screw cap/valve M10 x 25 | 65 | 8 | 8 | 8 | 8 | 1424-191 | |
| 25AJ-4 | Screw cap/valve M12 x 30 | 0.040 | 100 | 8 | 8 | 8 | 8 | 1424-215 |
| 25AK-3 | M10 x 40 counter flange screw | 0.030 | 65 | 6 | 6 | 6 | 6 | 1424-194 |
| 25AK-4 | M12 x 50 counter flange screw | 0.050 | 100 | 6 | 6 | 6 | 6 | 1424-219 |
Heat pump spare parts
Compressor models: SMC 104-106-108 & TSMC 108
| Position on the chart | Description | Part weight in kg. | Quantity for each compressor | Catalogue number | |||
| SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
| 98A | Side cover for heat pump | 13.800 | 1 | 1 | 1 | 1 | 3113-145 |
| 98B | Heat pump controller | 0.960 | 1 | 1 | 1 | 1 | 1553-031 |
| 98C | Level indicator assembly | 0.100 | 2 | 2 | 2 | 2 | 3185-038 |
| 98D | the outer part of the level indicator | 0.520 | 2 | 2 | 2 | 2 | 3185-034 |
| 98E | Gasket dia. 20/13x1.5 | 0.001 | 2 | 2 | 2 | 2 | 2356-125 |
| 98F | Rubber plug | 0.007 | 2 | 2 | 2 | 2 | 1554-194 |
| 98G | solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-453 | |
| 98H | solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-358 | |
| 98J-1 | 14W, 115V, 60Hz coil | 0.130 | 2 | 2 | 2 | 3 | 1372-055 |
| 98J-2 | 14W, 220V, 50Hz coil | 0.130 | 2 | 2 | 2 | 3 | 1372-056 |
| 98J-3 | Coil 14W, 240V, 50Hz | 0.130 | 2 | 2 | 2 | 3 | 1372-319 |
| 98J-4 | 14W, 220V, 60Hz coil | 0.130 | 2 | 2 | 2 | 3 | 1372-059 |
| 98K | 0.2 bar non-return valve | 2 | 2 | 2 | 2 | 1364-008 | |
| 98L | solenoid valve without coil | 1 | 1 | 1 | 1372-453 | ||
| 98M | Nozzle | 3 | 4 | 5 | 1 | 2314-097 | |
| 98N | filter | 1 | 1 | 1 | 1 | 4522-002 | |
| 98P | Stop valve | 0.600 | 1 | 1 | 1 | 1 | 2413-118 |
| 98Q | Intermediate cover | 12.500 | 1 | 1 | 1 | 1 | 3113-143 |
| 98T | OOSI oil cooler | 1 | 1 | 1 | 4242-029 | ||
| 98U | O-ring rubber seal for oil cooler | 1 | 1 | 1 | 1331-020 | ||
| diameter 21.8x3.53 | |||||||
| 98V | Fluoroplastic level sensor ring | 0.003 | 2 | 2 | 2 | 2 | 2353-152 |
| 98X | Level sensor round-section rubber sealing ring | 0.001 | 12 | 12 | 12 | 12 | 1331-011 |
| diam. 9.2x2.62 | |||||||
| 98Y | Side cover gasket | 2 | 2 | 2 | 2 | 2353-151 | |
| 98Z | M14x80 hex head screw | 0.080 | 16 | 16 | 16 | 16 | 1424-081 |
| 98AC | Gasket dia. 19/14x1.5 | 0.001 | 4 | 6 | 8 | 2356-125 | |
| 98AE | Gasket dia. 27/21x1.5 | 0.001 | 2 | 2 | 2 | 2 | 2356-136 |
Spare parts kits
Compressor Models: SMC 104-106-108 & TSMC 108 Mk 3 Type S-L-E
Column no. A501 = Standard Kit (Includes a suitable set of ring seals and valve plates and springs.)
Column no. A502 = Advanced Kit (In addition to spare parts from the standard kit, it also includes a cylinder liner and pressure valve, as well as more and more types of seals and mounting parts.)
Column no. A503 = Certificate Kit (In addition to parts from the extended spare parts set, it also contains more parts and wear parts recommended by classification societies.)
Column no. A504 = Special Kit (Contains more parts than the extended kit, as it includes almost all ring seals and gaskets, as well as a greater number of the most worn parts.)
| Position on the chart | Description | Catalogue number | Set column number | |||
| A501 | A502 | A503 | A504 | |||
| 1B-1 | Oil level peephole (glass) diam. 80 | 1226-015 | 1 | |||
| 1C-1 | O-ring rubber o-ring - dia. 52.07x2.62 no. 137 | 1331-140 | 2 | 2 | ||
| 2C-1 | Top cover gasket | 2353-151 | 2 | 4 | 4 | 6 |
| 2F-1 | Hexagon screw M14x120 8.8 DIN 931 | 1424-090 | 2 | |||
| 3H-1 | M12x 40 8.8 DIN 933 Hex Head Screw | 1424-217 | 2 | |||
| 4B-1 | End cover gasket on the oil pump side | 2353-011 | 1 | 1 | 1 | 2 |
| 4C-1 | M14x100 8.8 DIN 931 Hex Head Screw | 1424-085 | 2 | |||
| 5B - 1 | M14x 35 8.8 DIN 933 Hex Head Screw | 1424-240 | 2 | |||
| 5C-1 | Main bearing bush | 2132-021 | 2 | |||
| 6B-1 | M13x 60 8.8 DIN 933 Hex Head Screw | 1424-245 | 2 | |||
| 8B-1 | Shaft seal cover gasket | 2353-005 | 1 | 1 | 1 | 2 |
| 8C-1 | M10x 35 8.8 DIN 933 Hex Head Screw | 1424-193 | 4 | |||
| 10-1 | Shaft seal (service kit) | 3126-178 | 1 | 1 | 4 | 2 |
| 11P-1 | Gasket - dia. 32/27x1.5 mm | 2356-139 | 2 | 2 | 2 | |
| 12K-1 | Ring - diam. 9 mm | 1437-105 | 4 | |||
| 12K-2 | Ring - diam. 7 mm | 1437-103 | 4 | 4 | 4 | |
| 12S-1 | Discharge cylinder gasket 100x100x2 | 2354-023 | 4 | 4 | ||
| 13E-1 | M 6x16 screw | 1413-092 | 2 | |||
| 15D-1 | Discharge spring | 2142-061 | 2 | 4 | 8 | |
| 17-1 | Connecting rod assembly | 3123-004 | 1 | |||
| 17A-1 | Connecting rod liner (half bearing) | 2133-003 | 4 | 16 | ||
| 17B-1 | Piston pin bushing | 2132-004 | 4 | |||
| 18-1 | Piston with finger and rings, type | 1 | 1 | 2 | ||
| 18A-1 | Piston pin | 3125-084 | 4 | |||
| 18B-1 | Piston (compression ring) | 3125-130 | 4 | 4 | 4 | 12 |
| 18C-1 | Oil scraper ring | 3125-065 | 2 | 2 | 2 | 6 |
| 19-1 | Cylinder bush (liner) with suction valve | 1 | 1 | 2 | ||
| 19F-1 | Suction Valve Ring Plate | 3131-021 | 4 | 8 | 8 | 8 |
| 19G-1 | Valve spring | 2141-047 | 30 | 60 | 60 | 90 |
| 19K-1 | Cylinder bush gasket (liner) - 0.5 mm | 2356-111 | 2 | 4 | 8 | 8 |
| 19K-2 | Cylinder bush gasket (liner) - 0.8 mm | 2356-233 | 2 | 4 | 4 | 8 |
| 19N-1 | Hexagon head screw M 6x30 8.8 DIN 912 | 1413-343 | 6 | |||
| 20-1 | Discharge valve | 1 | 1 | 2 | ||
| 20C-1 | Discharge valve ring plate | 3131-015 | 4 | 8 | 8 | 8 |
| 20D-1 | M12x60 screw | 1413-121 | 2 | |||
| 20E-1 | M12x1.25 nut | 1432-075 | 2 | |||
| 22G-1 | Oil pressure valve (pressure reducing valve) gasket (pressure reducing valve) | 2354-075 | 1 | 1 | 2 | |
| 22H-1 | Hexagon screw M12x35 8.8 DIN 933 | 1424-216 | 2 | |||
| 24A-1 | Safety valve spring (SMC TSMC LP) | 2 | 1 | |||
| 24G-1 | Hexagon screw M 8x25 8.8 DIN 933 | 1424-168 | 2 | |||
| 25H-1 | PTFE O-ring (only for SMC diam. 62/45x3) | 2354-003 | 1 | 1 | 2 | |
| 25H-4 | 110/91x3 O-ring | 2354-117 | 1 | 1 | 2 | |
| 25J-1 | O-ring rubber sealing ring dia. 72.39x5.33 | 1331-154 | 1 | 1 | 2 | |
| 25J-4 | O-ring rubber o-ring dia. 116.84x7.0 | 1331-198 | 1 | 1 | 1 | |
| 25K-1 | Discharge valve rod | 2442-023 | 1 | |||
| 25K-4 | Suction shut-off valve rod | 2442-028 | 1 | |||
| 25P-1 | O-ring rubber sealing ring dia. 21.8x3.53 No.212 | 1331-020 | 4 | 8 | 8 | |
| 25P-4 | O-ring rubber sealing ring dia. 28.1x3.6 No.216 | 1331-024 | 1 | 2 | 2 | |
| 25R-1 | O-ring rubber sealing ring dia. 17.12x2.6 | 1331-016 | 2 | 4 | 4 | |
| 25Z-1 | Hexagon screw M14x45 8.8 DIN 933 | 1424-242 | 2 | |||
| 25Z-4 | M16x45 8.8 DIN 931 Hex Head Screw | 1424-102 | 2 | |||
| 25AG-3 | Stop valve gasket | 2354-105 | 1 | 2 | 2 | 2 |
| 25AG-4 | Stop valve gasket | 2354-106 | 1 | 2 | 2 | 2 |
| 30-1 | Suction pressure gauge | 1 | 1 | |||
| 31-1 | discharge gauge | 1 | 1 | |||
| 33A-1 | Oil filter | 1517-129 | 1 | 1 | 2 | 1 |
| 33B-1 | Gasket | 2356-202 | 1 | 1 | 2 | 1 |
| 34B-1 | Filter bag | 3425-083 | 2 | 4 | 2 | |
| 34D-1 | O-ring rubber sealing ring dia. 75.56x5.33 | 1331-042 | 2 | 2 | 2 | 2 |
| 34F - 1 | O-ring rubber o-ring dia. 91.67x3.53 No. 239 | 1331-080 | 2 | 2 | 2 | 2 |
| 38E - 1 | O-ring rubber sealing ring dia. 29.51x5.33 No. 321 | 1331-039 | 1 | 2 | 2 | |
| 38F - 1 | Gasket dia.27/21x1.5 mm | 2356-133 | 2 | 2 | 2 | |
| 38P - 1 | O-ring rubber sealing ring dia. 26.58x3.55 | 1331-023 | 1 | 2 | 2 | |
| 50-1 | solenoid valve coil | 1 | 1 | |||
| for TSMC compressor: | ||||||
| 2D | Water Cap Gasket (TSMC) | 2353-176 | 1 | 2 | 2 | 2 (1) |
| 17-2 | Connecting rod assembly (TSMC HP) | 3123-006 | 1 | |||
| 17B-2 | Needle bearing (TSMC HP) | 1511-275 | 2 | |||
| 19M-1 | Cylinder bushing (liner) sealing ring | 1331-085 | 2 | 2 | 4 | 4 |
| 24A-2 | Safety valve spring (TSMC HP) | 2 | 1 | |||
| 25H-1 | Gasket ring 62/45x3 | 2354-003 | 1 | 3 | 2 | |
| 90D-1 | O-ring rubber sealing ring dia. 82.15X3.5 | 1331-077 | 1 | 1 | 1 | 1 |
| 90E-1 | O-ring rubber sealing ring dia. 98.02X3.5 | 1331-081 | 1 | 1 | 1 | 1 |
| scheme | for water-cooled compressors: | |||||
| 2D | Water cover gasket, R/L | 2353-175 | 1 | 2 | 2 | 2 (3) |
| 2D | Water cover gasket, top-side | 2353-154 | 1 | 1 | 1 | 2 |
| 2E-2 | M14x110 8.8 DIN 931 Hex Head Screw | 1424-087 | 16 | |||
| 3E-2 | M14x 55 8.8 DIN 933 Hex Head Screw | 1424-244 | 6 | |||
| 3F-12 | M14x 35 8.8 DIN 933 Hex Head Screw | 1424-240 | 2 | |||
| scheme | For air-cooled compressors | |||||
| 2E-1 | M14x90 8.8 DIN 931 Hex Head Screw | 1424-083 | 16 | |||
| 3E-1 | M14x65 8.8 DIN 931 Hex Head Screw | 1424-246 | 6 | |||
| scheme | For belt driven compressors: | |||||
| V-belts | 1 set | 1 set | ||||
| scheme | For compressors with a clutch: | |||||
| Clutch kit | 1524-152 | 1 set | 1 set | |||
Sabroe screw compressors
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 110 SAB 120 SAB 128
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283
VMY 336 VMY 347 VMY 436
VMY 447 VMY 536
Sabroe piston compressors
Sabroe SMC 104 Sabroe SMC 106 Sabroe SMC 108 Sabroe SMC 112 Sabroe SMC 116
Sabroe TSMC 108 Sabroe TSMC 116
Spare parts catalogs for Sabroe screw compressors:
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283