- En →
- Zapchasti Kompressorov →
- Kompressory Sabroe →
- Smc 112 116 Tsmc 116
Toros LLC is industrial cold of Europe
Spare parts, repair and maintenance of refrigeration units.
Spare parts for compressors in stock and on order!
call:
WhatsApp
e-mail: storopov86@gmail.com
Spare parts for SMC112, SMC116, TSMC116 compressors
| Type S-L and E | ||||||
| Relevant drawings lor compressor | SMC | TSMC | ||||
| SMC 100 Mk 3, S-L-E (delivered after 89.10) | 0661-523 | 0661-524 | ||||
| Cylinder liner ect. SMC-TSMC 112, 116 Mk3 (after 89.10) | 0661-525 | |||||
| SMC 100 Mk3 | 0661-757 | 0661-758 | ||||
| Cylinder liner ect. SMC - TSMC 100 Mk3 | 0661-605 | |||||
| *) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery | ||||||
| Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Compressor frame | ||||||
| 1A-1 | Frame SMC 112 | 572.000 | 1 | 3111-071 | ||
| 1A-2 | Frame SMC 116 | 560.000 | 1 | 3111-069 | ||
| 1A-3 | Frame TSMC 116 | 560.000 | 1 | 3111-070 | ||
| 1B-1 | Oil level glass dia. 80 | 0.230 | 2 | 2 | 2 | 1226-015 |
| 1C-1 | O-ring PRP 137-52.07x 2.62*) | 0.002 | 2 | 2 | 2 | 1331-140 |
| 1D-1 | Hexagon head M6 x 18 | 0.010 | 8 | 8 | 8 | 1424-148 |
| 1E-1 | Intermediate flange | 0.010 | 1 | 1 | 1 | 2333-053 |
| Top cover - air cooled | ||||||
| 2A-1 | Top cover S-L | 19.000 | 6 | 8 | 7 | 3113-191 |
| 2A-2 | Top cover with flange S-L | 20.500 | 1 | 3113-192 | ||
| 2A-3 | Top cover E | 19.000 | 6 | 8 | 7 | 3113-177 |
| 2A-4 | Top cover with flange E | 20.500 | 1 | 3113-176 | ||
| 2C-1 | Gasket for top cover | 0.020 | 6 | 8 | 8 | 2353-151 |
| 2E-1 | Hexagon head M14 x 90 | 0.120 | 96 | 128 | 128 | 1424-083 |
| 2F-1 | Hexagon head M14 x 12C | 0.165 | 2 | 1424-090 | ||
| 2G-1 | Washer for M14 dia. 28/15 x 2.5 | 0.010 | 96 | 128 | 128 | 1436-037 |
| Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Top cover - water cooled (see sketch below) | ||||||
| 2A-1 | Top covers S-L | 19.000 | 6 | 8 | 7 | 3113-191 |
| 2A-2 | Top cover with flange S-L | 20.500 | 1 | 3113-192 | ||
| 2A-3 | Top cover E | 19.000 | 6 | 8 | 7 | 3113-177 |
| 2A-4 | Top cover with flange E | 20.500 | 1 | 3113-176 | ||
| 2B-1 | Water cover for cover with flange | 5.800 | 1 | 3113-195 | ||
| 2B-2 | Water cover left | 5.800 | 3 | 4 | 4 | 3113-193 |
| 2B-3 | Water cover right | 5.800 | 3 | 4 | 3 | 3113-194 |
| 2C-1 | Gasket for top cover | 0.020 | 6 | 8 | 8 | 2353-151 |
| 2D-1 | Gasket for water cover pos. 2B-1 | 0.020 | 1 | 2353-176 | ||
| 2D-2 | Gasket for water cover pos. 2B-2/2B-3 | 0.020 | 6 | 8 | 7 | 2353-175 |
| 2E-2 | Hexagon head screw M14 x 110 | 0.150 | 96 | 128 | 128 | 1424-087 |
| 2F-1 | Hexagon head screw M14 x 120 | 0.165 | 2 | 1424-090 | ||
| 2G-1 | Washer for M14, dia. 28/15 x 2.5 | 0.010 | 96 | 128 | 128 | 1436-037 |
| 2H-1 | Hexagon head screw M10 x 35 | 0.050 | 12 | 16 | 16 | 1424-193 |
| 2J-1 | Washer for M 10, dia. 21 /10.5 x 2 | 0.008 | 12 | 16 | 16 | 1436-035 |
| Side cover - air cooled | ||||||
| 3A-1 | Side cover | 10.900 | 4 | 4 | 4 | 3113-148 |
| 3C-1 | Gasket for side cover | 0.020 | 4 | 4 | 4 | 2353-151 |
| 3E-1 | Hexagon head screw M14 x 65 | 0.045 | 64 | 64 | 64 | 1424-246 |
| 3G-1 | Washer for M14, dia. 28/15 x 2.5 | 0.010 | 64 | 64 | 64 | 1436-037 |
| Side cover - water cooled | ||||||
| 3A-2 | Side cover with cooling fins | 15.000 | 4 | 4 | 4 | 3113-140 |
| 3B-1 | Water cover | 5.800 | 4 | 4 | 4 | 3113-138 |
| 3C-1 | Gasket for side cover | 0.020 | 4 | 4 | 4 | 2353-151 |
| 3D-1 | Gasket for water cover | 0.020 | 4 | 4 | 4 | 2353-154 |
| 3E-2 | Hexagon head screw M14 x 55 | 0.065 | 56 | 56 | 56 | 1424-244 |
| 3F-1 | Hexagon head screw M14 x 35 | 0.045 | 8 | 8 | 8 | 1424-240 |
| 3G-1 | Washer for M14, dia. 28/15 x 2.5 | 0.010 | 64 | 64 | 64 | 1436-037 |
| 3H-1 | Hexagon head screw M12 x 40 | 0.050 | 4 | 4 | 4 | 1424-217 |
| 3J-1 | Washer for M12, dia. 24/13 x 2.5 | 0.008 | 4 | 4 | 4 | 1436-036 |
| End cover at pump end | ||||||
| 4A-1 | End cover | 17.950 | 1 | 1 | 1 | 3113-028 |
| 4B-1 | Gasket | 0.020 | 1 | 1 | 1 | 2353-011 |
| 4C-1 | Hexagon head screw M14 x 100 | 0.150 | 14 | 14 | 14 | 1424-085 |
| 4D-1 | Washer for M14 dia. 28/15 x 2.5 | 0.010 | 14 | 14 | 14 | 1436-037 |
| Bearing cover at pump end | ||||||
| 5A-1 | Bearing cover | 9.100 | 1 | 1 | 1 | 3113-031 |
| 5B-1 | Hexagon head screw M14 x 35 | 0.055 | 6 | 6 | 6 | 1424-240 |
| 5C-1 | Bushing | 1.200 | 1 | 1 | 1 | 2132-021 |
| 5C-2 | Bushing for repair (0.5 mm undersize) | 1.220 | 1 | 1 | 1 | 2132-022 |
| 5D-1 | Gasket - 0.3 mm | 0.005 | 1 | 1 | 1 | 2353-013 |
| 5D-2 | Gasket - 0.5 mm | 0.006 | 1 | 1 | 1 | 2353-100 |
| 5D-3 | Gasket - 0.75 mm | 0.010 | 1 | 1 | 1 | 2353-014 |
| 5D-4 | Gasket -1.0 mm | 0.015 | 1 | 1 | 1 | 2353-015 |
| Bearing cover at shaft seal end | ||||||
| 6A-1 | Bearing cover | 23.000 | 1 | 1 | 1 | 3113-124 |
| 6B-1 | Hexagon head screw M14 x 60 | 0.085 | 14 | 14 | 14 | 1424-245 |
| 6C-3 | Bushing | 1.200 | 1 | 1 | 1 | 2132-021 |
| 6C-4 | Bushing for repair (0.5 mm undersize) | 1.200 | 1 | 1 | 1 | 2132-022 |
| 6D-1 | Gasket | 0.020 | 1 | 1 | 1 | 2353-011 |
| 6E-1 | Washer for M14, dia. 28/15 x 2.5 | 0.010 | 14 | 14 | 14 | 1436-037 |
| 6F | Valve for prelubrication | 1 | 1 | 1 | 2412-585 | |
| 6G | Nut | 1 | 1 | 1 | 2313-045 | |
| 6H | Special joint | 1 | 1 | 1 | 2334-027 | |
| 6J | Cap | 1 | 1 | 1 | 2313-027 | |
| 6K | Joint 3/8" | 1 | 1 | 1 | 1349-053 | |
| 6L | Alu gasket | 1 | 1 | 1 | 2356-123 | |
| Shaft seal type SB100 Revision 1 for compressor nos. up to 98379 | ||||||
| Spare parts kit: | 1 | 1 | 1 | 3184-225 | ||
| Consist of: - see Revision 3 | ||||||
| Revision 2 for compressor nos. after 98379 incl. | ||||||
| Spare parts kit: | 1 | 1 | 1 | 3126-178 | ||
| 10E-2 | Consist of: Slide ring, steel | 1 | 1 | 1 | ||
| 10F-1 | Slide ring, carbon | 1 | 1 | 1 | ||
| 10D-1 | O-ring dia. 75.79 x 3.53 | 1 | 1 | 1 | ||
| 10G-2 | Sealing ring | 1 | 1 | 1 | ||
| 10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | ||
| 13 | Allen key - NV 4 x 90 x 90 | 1 | 1 | 1 | ||
| 8B-1 | Gasket for cover | 1 | 1 | 1 | ||
| Mounting instruction | 0171-934 | |||||
| Revision 3 | ||||||
| Spare parts kit: | 1 | 1 | 1 | 3184-225 | ||
| 10E-1 | Consist of: Slide ring, steel | 1 | 1 | 1 | ||
| 10F-1 | Slide ring, carbon | 1 | 1 | 1 | ||
| 10D-1 | O-ring dia. 75.79 x 3.53 | 1 | 1 | 1 | ||
| 10G-1 | O-ring dia. 82,14x3,53 | 1 | 1 | 1 | ||
| 10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | ||
| 13 | Alien key - NV 4 x 90 x 90 | 1 | 1 | 1 | ||
| 8B-1 | Gasket for cover | 1 | 1 | 1 | ||
| Mounting instruction | 0171-930 | |||||
| Shaft seal complete: SMC/TSMC 100 | 1 | 1 | 1 | 3184-226 | ||
| Consist of: | ||||||
| 8A-2 | Cover (SMC/TSMC 100) | 1 | 1 | 1 | 3113-175 | |
| 8B-1 | Gasket for cover | 1 | 1 | 1 | 2353-005 | |
| 8C-1 | Hex. head screw M10 x 40 - DIN 933 | 6 | 6 | 6 | 1424-194 | |
| Allen key - NV 4 x 90 x 90 | 1 | 1 | 1 | 1612-392 | ||
| 8D-1 | Hose connection 1/4" | 1 | 1 | 1 | 1345-143 | |
| 8E-1 | PVC hose 3/16" x 400 | 1241-190 | ||||
| 8F-1 | Spirolox ring dia. 76 | 1 | 1 | 1 | 1437-295 | |
| 8G-1 | Lock spring | 1 | 1 | 1 | 3126-169 | |
| 8H-1 | Groover pin dia. 4 x 20 | 1 | 1 | 1 | 1446-081 | |
| 10A-1 | Retaining flange | 1 | 1 | 1 | 3126-166 | |
| 10B-1 | Spring | 10 | 10 | 10 | 2142-058 | |
| 10D-1 | O-ring dia. 75.79 x 3.53 | 1 | 1 | 1 | 1331-075 | |
| 10E-2 | Slide ring, steel | 1 | 1 | 1 | 3126-167 | |
| 10F-1 | Slide ring, carbon | 1 | 1 | 1 | 3126-168 | |
| 10G-1 | O-ring dia. 82.14 x 3.53 | 1 | 1 | 1 | 1331-077 | |
| 10H-1 | Locking ring | 1 | 1 | 1 | 3126-153 | |
| 10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | 1413-329 | |
| Oil pump | ||||||
| 11-1 | Oil pump complete | 2.400 | 1 | 1 | 1 | 3141-004 |
| Contains: | ||||||
| -Oil pump | ||||||
| 11J-Lock nut, M10x 10.7 | ||||||
| 11L - Washer for M10 dia. 21/10.5 x 2 | ||||||
| 11N-Key 5 x 5 x 12 | ||||||
| 11P-Gasket dia. 32/27x1.5 | ||||||
| 11S - Threaded nipple | ||||||
| 11G-1 | Gear whell for pump pinion | 0.660 | 1 | 1 | 1 | 3141-046 |
| 11H-1 | Gear wheel for crack shaft | 0.530 | 1 | 1 | 1 | 3141-047 |
| 11M-1 | Hexagon head screw M6 x 25 | 0.010 | 4 | 4 | 4 | 1424-153 |
| 11Q-1 | Hexagon head screw M12 x 30 | 0.040 | 2 | 2 | 2 | 1424-215 |
| 11R-1 | Spring washer dia. 12 | 0.002 | 2 | 2 | 2 | 1437-081 |
| 11T-1 | Spring washer- dia. 11.1/6.1 x 1.6 | 0.005 | 4 | 4 | 4 | 1437-022 |
| Unloading cylinder | ||||||
| 12-1 | Unloading cylinder Complete L=75, S=21.5 | 1.765 | 1 | 1 | 1 | 3135-149 |
| 12-2 | Unloading cylinder Complete L=100, S=46.5 | 1.790 | 1 | 1 | 1 | 3135-150 |
| 12-3 | Unloading cylinder Complete L=125, 8=71.5 | 1.815 | 1 | 1 | 3135-151 | |
| 12-4 | Unloading cylinder Complete L=150, S=96.5 | 1.840 | 1 | 3135-152 | ||
| 12-5 | Unloading cylinder (HP) Complete L=82, S=24.5 | 1.800 | 3135-161 | |||
| 12A-1 | Unloading cylinder (SMC and TSMC LP) | 1.700 | 2 | 3 | 4 | 3135-147 |
| 12A-2 | Unloading cylinder (TSMC HP) | 1.800 | 3135-148 | |||
| 12B-1 | Piston | 0.220 | 2 | 3 | 4 | 3135-034 |
| 12C-1 | Piston rod 75 mm (SMC only) | 0.065 | 1 | 1 | 1 | 3135-041 |
| 12C-2 | Piston rod 100 mm | 0.090 | 1 | 1 | 1 | 3135-042 |
| 12C-3 | Piston rod 125 mm | 0.115 | 1 | 1 | 3135-043 | |
| 12C-4 | Piston rod 150 mm | 0.140 | 1 | 3135-044 | ||
| 12C-5 | Piston rod 82 mm, grounded (TSMC HP only) | 0.090 | 3135-140 | |||
| 12D-1 | Threaded plug - 3/8" BSP | 0.065 | 2 | 3 | 4 | 2314-025 |
| 12E-1 | Gasket - dia. 25/17x1.5 | 0.002 | 2 | 3 | 4 | 2356-130 |
| 12F-1 | Seeger ring dia. 52 (SmCandtSMCLP) | 0.008 | 2 | 3 | 4 | 1437-155 |
| 12G-1 | Spring guide | 0.040 | 2 | 3 | 4 | 2145-004 |
| 12H-1 | Spring retainer (SMC and TSMC LP) | 0.110 | 2 | 3 | 4 | 3135-057 |
| 12J-1 | Spring (outer) | 0.065 | 2 | 2 | 4 | 2142-056 |
| 12J-2 | Spring (inner) | 0.035 | 2 | 3 | 4 | 2142-055 |
| 12K-1 | Benzing ring - dia. 9 mm | 0.002 | 2 | 3 | 4 | 1437-105 |
| 12K-2 | Benzing ring - dia. 7 mm (SmCandtSMCLP) | 0.001 | 2 | 3 | 4 | 1437-103 |
| 12L-1 | Hexagon head screw M10 x 30 | 0.030 | 8 | 12 | 16 | 1424-192 |
| 12M-1 | Cover (TSMC HP only) | 0.800 | 1 | 3135-105 | ||
| 12N-1 | Gasket for cover (TSMC HP only) | 0.010 | 1 | 2353-025 | ||
| 12P-1 | Look nut - UNF 3/8" (TSMC HP only) | 0.010 | 1 | 1433-100 | ||
| 12Q-1 | Socket cap screw M4 x 16 (TSMC HP only) | 0.010 | 6 | 1413-007 | ||
| 12R-1 | O-ring PRP 112 12.37x2.62 (TSMC HP only) *) | 0.001 | 1 | 1331-013 | ||
| 12S-1 | Gasket 100 x 100 x 2 | 0.010 | 8 | 8 | 8 | 2354-023 |
| Frame for unloading mechanism | ||||||
| Frame complete incl. pos. 13E-1 | 3184-216 | |||||
| 13A-1 | Suspension rod | 0.290 | 6 | 8 | 8 | |
| 13B-1 | Suspension rod | 0.290 | 6 | 8 | 8 | |
| 13C-1 | Cross piece | 0.330 | 6 | 8 | 8 | |
| 13D-1 | Cross piece | 0.330 | 6 | 8 | 8 | |
| 13E-1 | Countersunk screw M6 x 16 | 0.020 | 24 | 32 | 32 | 1413-092 |
| Bracket for unloading mechanism | ||||||
| 14A-1 | Bracket with pin | 0.065 | 12 | 16 | 14 | 3135-060 |
| 14B-1 | Spacing ring | 0.005 | 24 | 32 | 28 | 2124-003 |
| 14C-1 | Hexagon head screw M6 x 30 | 0.010 | 24 | 32 | 28 | 1424-154 |
| 14D-1 | Spring washer - dia. 6 | 0.005 | 24 | 32 | 28 | 1437-022 |
| Rocker for unloading mechanism | ||||||
| 15A-1 | Rocker | 0.050 | 24 | 32 | 32 | 3135-096 |
| 15B-1 | Bearing for SMC and TSMC LP | 0.006 | 24 | 32 | 24 | 3135-099 |
| 15B-2 | Bearing for TSMC HP | 0.006 | 8 | 3135-101 | ||
| 15C-1 | Spring retainer | 0.001 | 24 | 32 | 32 | 2145-001 |
| 15D-1 | Spring | 0.007 | 24 | 32 | 32 | 2142-061 |
| 15E-1 | Washer for bearing cup - 0.5 mm | 0.001 | 2114-003 | |||
| Crankshaft - all without certificate | ||||||
| 16A-7 | Crankshaft for SMC 112S, complete | 88.800 | 1 | 3121-022 | ||
| 16A-8 | Crankshaft for SMC 116S and TSMC 116S, complete | 91.400 | 1 | 1 | 3121-023 | |
| 16A-9 | Crankshaft for SMC 112L, complete | 92.000 | 1 | 3121-107 | ||
| 16A-10 | Crankshaft for SMC 116L and TSMC 116L, complete | 100.400 | 1 | 1 | 3121-108 | |
| 16A-14 | Crankshaft for SMC 112E, complete | 1 | 3121-216 | |||
| 16A-15 | Crankshaft for SMC 116E and TSMC 116E, complete | 1 | 1 | 3121-217 | ||
| 16B-1 | Plain washer with pin | 0.800 | 1 | 1 | 1 | 2125-084 |
| 16C-1 | Key-18 x 11x 55 | 0.080 | 1 | 1 | 1 | 2123-005 |
| 16D-1 | Hexagon head screw M16 x 55 | 0.050 | 1 | 1 | 1 | 1424-104 |
| 16E-1 | Spring washer - dia. 16 | 0.004 | 1 | 1 | 1 | 1437-027 |
| 16F-1 | Plug M 12 S-type | 0.010 | 4 | 4 | 4 | 1413-260 |
| 16F-2 | Plug 1/4"L-type | 0.010 | 4 | 5 | 5 | 1343-141 |
| Connecting rod | ||||||
| 17-1 | Connecting rod, complete SMC and TSMC LP | 2.300 | 12 | 16 | 12 | 3123-004 |
| 17-2 | Connecting rod. completetSMC HP | 2.700 | 4 | 3123-006 | ||
| 17A-1 | Half-section of bearing | 0.080 | 24 | 32 | 32 | 2133-003 |
| 17A-2 | Half-section of bearing (0.5 mm undersize) | 0.080 | 24 | 32 | 32 | 2133-004 |
| 17B-1 | Bushing for piston pin SMC and TSMC LP | 0.200 | 12 | 16 | 12 | 2132-004 |
| 17B-2 | Needle bearing TSMC HP | 0.200 | 4 | 1511-275 | ||
| 17C-1 | Bolt for connecting rod | 0.055 | 24 | 32 | 32 | 2111-068 |
| 17D-1 | Lock nut - 3/8" UNF | 0.010 | 24 | 32 | 32 | 1433-116 |
| Piston with pin and rings | ||||||
| 18-1 | Piston with pin and rings S | 1.320 | 12 | 16 | 16 | 3124-002 |
| 18-2 | Piston with pin and rings L | 1.320 | 12 | 16 | 16 | 3124-052 |
| 18-3 | Piston with pin and rings E | 1.320 | 12 | 16 | 16 | 3124-065 |
| 18A-1 | Piston pin | 0.500 | 12 | 16 | 16 | 3125-084 |
| 18B-1 | Piston ring | 0.025 | 24 | 32 | 32 | 3125-130 |
| 18C-1 | Oil scraper rings | 0.030 | 12 | 16 | 16 | 3125-065 |
| 18D-1 | Seeger-ring - dia. 40 (inside diameter) | 0.005 | 24 | 32 | 32 | 1437-150 |
| Cylinder liner with sction valve | ||||||
| 19-1 | Cylinder liner with suction valve R717, SMC - TSMC LP, S and L | 4.100 | 12 | 16 | 12 | 3112-085 |
| 19-5 | Cylinder liner with suction valve R717, SMC- TSMC LP, E | 4.500 | 12 | 16 | 12 | 3112-081 |
| 19-2 | Cylinder liner with suction valve HFC/HCFC, SMC - TSMC LP, S and L | 4.100 | 12 | 16 | 12 | 3112-086 |
| 19-3 | Cylinder liner with suction valve R717. SMC - TSMC HP, S and L | 4.100 | 4 | 3112-087 | ||
| 19-6 | Cylinder liner with suction valve R717, SMC-TSMC HP, E | 4.500 | 4 | 3112-097 | ||
| 19-4 | Cylinder liner with suction valve HFC/HCFC, TSMC HP, S and L | 4.100 | 4 | 3112-088 | ||
| 19A-1 | Cylinder liner S and L | 3.500 | 12 | 16 | 16 | 3112-065 |
| 19A-2 | Cylinder liner, E | 4.000 | 12 | 16 | 16 | 3112-080 |
| 19B-1 | Unloading rings with pins, S and L | 0.400 | 12 | 16 | 16 | 3135-054 |
| 19B-2 | Unloading rings with pins, E | 0.500 | 12 | 16 | 16 | 3135-173 |
| 19C-1 | Washer-dia. 8/4.3x0.5 | 0.001 | 72 | 96 | 96 | 2114-001 |
| 19D-1 | Spring for unloading ring | 0.001 | 72 | 96 | 96 | 2142-034 |
| 19E-1 | Tension spring - 342 mm | 0.015 | 12 | 16 | 16 | 2142-048 |
| 19F-1 | Ring plate for suction valve | 0.035 | 12 | 16 | 16 | 3131-021 |
| 19G-1 | Valve spring | 0.001 | 72 | 96 | 96 | 2141-047 |
| 19H-1 | Suction valve retaining plate R717 | 1.400 | 12 | 16 | 16 | 3132-083 |
| 19H-2 | Suction valve retaining plate R12/R22 | 1.400 | 12 | 16 | 16 | 3132-084 |
| 19J-1 | Guide ring for discharge valve | 0.450 | 12 | 16 | 16 | 3134-008 |
| 19K-1 | Gasket for cylinder liner - 0.5 mm | 0-005 | 12 | 16 | 16 | 2356-111 |
| 19K-2 | Gasket for cylinder liner - 0.8 mm | 0.006 | 12 | 16 | 16 | 2356-233 |
| 19M-1 | O-ring 107.55 x 3.53*) TSMC HP | 0.002 | 4 | 1331-085 | ||
| 19N-1 | Socket cap screw M6 x 30 | 0.010 | 72 | 96 | 96 | 1413-343 |
| 19T-1 | Gasket - dia. 163/141 x 0.2 mm | 0.001 | 12 | 16 | 13 | 2353-140 |
| Discharge valve**) | ||||||
| 20-1 | Disharge valve - R717 - HP | 1.200 | 12 | 16 | 4 | 3136-089 |
| 20-2 | Disharge valve - R717 - LP | 1.200 | 12 | 16 | 12 | 3136-087 |
| 20-3 | Disharge valve - HFC/HCFC - HP | 1.200 | 12 | 16 | 4 | 3136-088 |
| 20-4 | Disharge valve - HFC/HCFC - LP | 1.200 | 12 | 16 | 12 | 3136-086 |
| 20-5 | Disharge valve - HFC/HCFC - VHP | 1.200 | 12 | 16 | 3136-085 | |
| 20A-1 | Disharge valve seat | 0.250 | 12 | 16 | 16 | 3133-027 |
| 20B-1 | Retaining plate - R717 - HP | 1.000 | 12 | 16 | 4 | 3132-092 |
| 20B-2 | Retaining plate - R717 - LP | 1.000 | 16 | 12 | 3132-090 | |
| 20B-3 | Retaining plate - HFC/HCFC - HP | 1.000 | 12 | 16 | 4 | 3132-093 |
| 20B-4 | Retaining plate - HFC/HCFC - LP | 1.000 | 12 | 16 | 12 | 3132-091 |
| 20B-5 | Retaining PlateHFC/HCFC - VHP | 1.000 | 12 | 16 | 3132-094 | |
| 20C-1 | Ring plate | 0.030 | 12 | 16 | 16 | 3131-015 |
| 20D-1 | Special screw M12 x 60 | 0.055 | 12 | 16 | 16 | 1413-121 |
| 20E-1 | Nut M12 x 1.25 | 0.015 | 24 | 32 | 32 | 1432-075 |
| 20F-1 | Spring guide | 0.015 | 12 | 16 | 16 | 2145-008 |
| 20G-1 | Valve spring - R717-HP | 0.001 | 96 | 128 | 32 | 2141-047 |
| 20G-1 | Valve spring - R717 - LP | 0.001 | 72 | 96 | 72 | 2141-047 |
| 20G-1 | Valve spring - HFC/HCFC - HP | 0.001 | 144 | 192 | 48 | 2141-047 |
| 20G-1 | Valve spring - HFC/HCFC - LP | 0.001 | 72 | 96 | 72 | 2141-047 |
| 20G-1 | Valve spring - HFC/HCFC - VHP | 0.001 | 192 | 256 | 2141-047 | |
| **) Compressors are fitted with disarge valves depending on the working conditions. | ||||||
| The valve is selected on the bis of the refrigerator and the condensing/intermediate | ||||||
| pressure temperature of the plant, indicated in the table in °C. | ||||||
| For inst. R22 at TC=53°C=>VHP disarge valve. | ||||||
| Refri-gerant | Conditions | Valve type | ||||
| R717 | TC < 15°C | LP | ||||
| TC > 15°C | HP | |||||
| HFC/ HCFC | TC < 15°C | LP | ||||
| 45°C R404A-R507 15°C ≤ TC< 50°CR22 70°CR134a | HP | |||||
| 45°C R404A-R507 TC≥ TC< 50°CR22 70°CR134a | VHP | |||||
| Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Spring for safety head | ||||||
| 21-1 | Spring | 0.400 | 12 | 16 | 16 | 2142-060 |
| Oil pressure valve | ||||||
| 22A-1 | Oil pressure valve, complete | 0.450 | 1 | 1 | 1 | 3142-150 |
| 22B-1 | Gasket 90 x 44 x 1 | 0.001 | 1 | 1 | 1 | 2354-075 |
| 22C-1 | Hexagon head screw M12 x 35 | 0.040 | 2 | 2 | 2 | 1424-216 |
| Oil charging valve | ||||||
| 23A-1 | Oil charging valve, complete | 0.300 | 1 | 1 | 1 | 2412-585 |
| 23B-1 | Threaded reducing nipple | 0.155 | 1 | 1 | 1 | 2311-059 |
| 23C-1 | Socket | 0.075 | 1 | 1 | 1 | 2313-035 |
| 23D-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-123 |
| 23E-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-140 |
| 23F-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-283 |
| 23G-1 | Nut | 0.060 | 1 | 1 | 1 | 2313-027 |
| By-pass valves | ||||||
| 24-1 | By-pass valve dia. 28 12 bar | 3.600 | 2 | 3137-018 | ||
| 24-2 | By-pass valve dia. 28 22 bar | 3.600 | 2 | 2 | 1 | 3137-007 |
| 24-3 | By-pass valve dia. 28 24 bar | 3.600 | 2 | 2 | 1 | 3137-009 |
| 24B-1 | O-ring for cylinder *) | 0.002 | 2 | 2 | 3 | 1331-067 |
| 24C-1 | O-ring for cover *) | 0.002 | 8 | 8 | 3 | 1331-071 |
| 24D-1 | Hexagon head screw M8 x 25 | 0.015 | 8 | 1424-168 | ||
| 24D-2 | Hexagon head screw M8 x 50 | 0.025 | 8 | 8 | 4 | 1424-173 |
| 24E-1 | Spring washer dia. 14.2/8.2 x 2 | 0.002 | 12 | 1437-023 | ||
| 24F-2 | Intermediate piece | 1 | 2469-002 | |||
| Pos. | Designation | Weight each in kg | Valve dim. | Number each comprassor | Part no. | ||
| SMC 112 | SMC 116 | SMC 116 | |||||
| Stop valves | |||||||
| 25-3 | Complete valve, disarge HP | 65 | 1 | 2414-069 | |||
| 25-4 | Complete valve, inlet HP | 80 | 1 | 2411-263 | |||
| 25-5 | Complete valve, disarge LP | 100 | 1 | 1 | 1 | 2414-070 | |
| 25-6 | Complete valve, inlet LP | 125 | 1 | 1 | 1 | 2414-048 | |
| 25A-3 | Valve housing | 65 | 1 | 2432-159 | |||
| 25A-4 | Valve housing | 3.200 | 80 | 1 | 2432-143 | ||
| 25A-5 | Valve housing | 100 | 1 | 1 | 1 | 2432-160 | |
| 25A-6 | Valve housing | 125 | 1 | 1 | 1 | 2432-110 | |
| 25B-3 | Valve bonnet | 1.740 | 65 | 1 | 2433-028 | ||
| 25B-4 | Valve bonnet | 3.200 | 80 | 1 | 2433-029 | ||
| 25B-5 | Valve bonnet | 4.500 | 100 | 1 | 1 | 1 | 2433-030 |
| 25B-6 | Valve bonnet | 8.700 | 125 | 1 | 1 | 1 | 2433-008 |
| 25C-3 | Front part for cone | 0.095 | 65 | 1 | 1 | 2444-090 | |
| 25C-4 | Front part for cone | 0.028 | 80 | 1 | 1 | 2444-092 | |
| 25C-5 | Front part for cone | 0.520 | 100 | 1 | 1 | 1 | 2444-094 |
| 25C-6 | Front part for cone | 0.520 | 125 | 1 | 1 | 1 | 2444-005 |
| 25D-3 | Rear part for cone | 0.185 | 65 | 1 | 1 | 2444-091 | |
| 25D-4 | Rear part for cone | 0.440 | 80 | 1 | 1 | 2444-093 | |
| 25D-5 | Rear part for cone | 1.000 | 100 | 1 | 1 | 1 | 2444-095 |
| 25D-6 | Rear part for cone | 1.650 | 125 | 1 | 1 | 1 | 2444-013 |
| 25E-3 | Screw for valve cone | 0.020 | 65 | 1 | 2444-017 | ||
| 25E-4 | Screw for valve cone | 0.120 | 80 | 1 | 2444-018 | ||
| 25E-5 | Screw for valve cone | 0.120 | 100 | 1 | 1 | 1 | 2444-018 |
| 25E-6 | Screw for valve cone | 0.120 | 125 | 1 | 1 | 1 | 2444-018 |
| 25F-3 | Gasket for screw dia. 31/24 x 1.5 | 0.001 | 65 | 1 | 2356-138 | ||
| 25F-4 | Gasket for screw dia. 34/27 x 1.5 | 0.001 | 80 | 1 | 2356-141 | ||
| 25F-5 | Gasket for screw dia. 34/27 x 1.5 | 0.001 | 100 | 1 | 1 | 1 | 2356-141 |
| 25F-6 | Gasket for screw dia. 34/27 x 1.5 | 0.001 | 125 | 1 | 1 | 1 | 2356-141 |
| 25G-3 | Threaded connection | 0.180 | 65 | 1 | 2445-053 | ||
| 25G-4 | Threaded connection | 0.340 | 80 | 1 | 2445-060 | ||
| 25G-5 | Threaded connection | 0.400 | 100 | 1 | 1 | 1 | 2445-061 |
| 25G-6 | Threaded connection | 0.650 | 125 | 1 | 1 | 1 | 2445-009 |
| 25H-3 | Sealing ring dia. 62/45 x 3 | 0.004 | 65 | 1 | 2354-003 | ||
| 25H-4 | Sealing ring dia. 85/66 x 3 | 0.015 | 80 | 1 | 2354-115 | ||
| 25H-5 | Sealing ring dia. 110/91 x 3 | 0.020 | 100 | 1 | 1 | 1 | 2354-117 |
| 25H-6 | Sealing ring dia. 133/110 x 3 | 0.030 | 125 | 1 | 1 | 1 | 2354-118 |
| 25J-3 | Gasket for bonnet dia. 72.39 x 5.33 | 0.010 | 65 | 1 | 1331-154 | ||
| 25J-4 | Gasket for bonnet dia. 94.62 x 5.33 | 0.015 | 80 | 1 | 1331-161 | ||
| 25J-5 | Gasket for bonnet dia. 116.84 x 7 | 0.020 | 100 | 1 | 1 | 1 | 1331-198 |
| 25J-6 | Gasket for bonnet dia. 167.5/148 x 2 | 0.003 | 125 | 1 | 1 | 1 | 1331-112 |
| 25K-3 | Spindle | 0.250 | 65 | 1 | 2442-023 | ||
| 25K-4 | Spindle | 0.420 | 80 | 1 | 2442-030 | ||
| 25K-5 | Spindle | 0.480 | 100 | 1 | 1 | 1 | 2442-028 |
| 25K-6 | Spindle | 0.700 | 125 | 1 | 1 | 1 | 2442-025 |
| 25L-3 | Lock washer for spindle | 0.010 | 65 | 1 | 2445-019 | ||
| 25L-4 | Lock washer for spindle | 0.015 | 80 | 1 | 2445-020 | ||
| 25L-5 | Lock washer for spindle | 0.015 | 100 | 1 | 1 | 1 | 2445-020 |
| 25L-6 | Lock washer for spindle | 0.015 | 125 | 1 | 1 | 1 | 2445-020 |
| 25M-3 | Packing gland Compl. with o-rings | 0.120 | 65 | 1 | 2452-073 | ||
| 25M-4 | Packing gland Compl. with o-rings | 0.250 | 80 | 1 | 2452-004 | ||
| 25M-5 | Packing gland Compl. with o-rings | 0.250 | 100 | 1 | 1 | 1 | 2452-004 |
| 25M-6 | Packing gland Compl. with o-rings | 0.250 | 125 | 1 | 1 | 1 | 2452-004 |
| 25N-3 | Guide pin | 0.002 | 65 | 1 | 1445-085 | ||
| 25N-4 | Guide pin | 0.002 | 80 | 1 | 1445-085 | ||
| 25N-5 | Guide pin | 0.002 | 100 | 1 | 1 | 1 | 1445-085 |
| 25N-6 | Guide screw | 0.006 | 125 | 1 | 1 | 1 | 2111-035 |
| 25P-3 | O-ring dia. 21.8x3.5*) | 0.002 | 65 | 1 | 1331-020 | ||
| 25P-4 | O-ring dia. 28.2 x 3.5*) | 0.002 | 80 | 1 | 1331-024 | ||
| 25P-4 | O-ring dia. 28.2 x 3.5*) | 0.002 | 100 | 1 | 1 | 1 | 1331-024 |
| 25P-6 | O-ring dia. 28.2 x 3.5*) | 0.002 | 125 | 1 | 1 | 1 | 1331-024 |
| 25Q-3 | Nylon washer dia. 39,5/28 x 1.5 | 0.001 | 65 | 1 | 2354-018 | ||
| 25Q-4 | Nylon washer dia. 34/22 x 1.5 | 0.002 | 80 | 1 | 2354-017 | ||
| 25Q-5 | Nylon washer dia. 34/22 x 1.5 | 0.002 | 100 | 1 | 1 | 1 | 2354-017 |
| 25Q-6 | Nylon washer dia, 34/22 x 1.5 | 0.002 | 125 | 1 | 1 | 1 | 2354-017 |
| 25R-3 | O-ring dia. 17.12x2.62*) | 0.001 | 65 | 2 | 2 | 1331-016 | |
| 25R-4 | O-ring dia. 21.8x3.5 | 0.002 | 80 | 2 | 2 | 1331-020 | |
| 25R-5 | O-ring dia. 21.8x3.5 | 0.002 | 100 | 2 | 2 | 2 | 1331-020 |
| 25R-6 | O-ring dia. 21.8x3.5 | 0.002 | 125 | 2 | 2 | 2 | 1331-020 |
| 25S-3 | Hand wheel dia. 120 | 0.160 | 65 | 1 | 1365-036 | ||
| 25S-4 | Hand wheel dia. 140 | 0.400 | 80 | 1 | 1365-033 | ||
| 25S-5 | Hand wheel dia. 180 | 0.800 | 100 | 1 | 1 | 1 | 1365-035 |
| 25S-6 | Hand wheel dia. 180 | 0.800 | 125 | 1 | 1 | 1 | 1365-035 |
| 25T-3 | Screw for hand wheel M5 x 10 | 0.002 | 65 | 1 | 1424-140 | ||
| 25T-4 | Screw for hand wheel M8 x 16 | 0.010 | 80 | 1 | 1424-166 | ||
| 25T-5 | Screw for hand wheel M8 x 16 | 0.010 | 100 | 1 | 1 | 1 | 1424-166 |
| 25T-6 | Screw for hand wheel M8 x 16 | 0.010 | 125 | 1 | 1 | 1 | 1424-166 |
| 25U-3 | Washer for hand wheel | 0.001 | 65 | 1 | 1436-024 | ||
| 25U-4 | Washer for hand wheel | 0.003 | 80 | 1 | 1436-026 | ||
| 25U-5 | Washer for hand wheel | 0.003 | 100 | 1 | 1 | 1 | 1436-026 |
| 25U-6 | Washer for hand wheel | 0.003 | 125 | 1 | 1 | 1 | 1436-026 |
| 25V-6 | Spring washer dia. 14.2/8.2 x 2 | 0.002 | 125 | 1 | 1437-023 | ||
| 25Y-3 | Gasket for welding nipple dia. 90/68 x 2 | 0.015 | 65 | 1 | 2356-087 | ||
| 25Y-4 | Gasket for welding nipple dia. 130/95x2 | 0.025 | 100 | 1 | 1 | 1 | 2356-104 |
| 25Y-6 | Gasket for welding nipple dia. 155/125x2 | 0.025 | 125 | 1 | 1 | 1 | 2356-109 |
| 25Z-3 | Screw valve/compr. M14 x 45 | 0.050 | 65 | 4 | 1424-242 | ||
| 25Z-4 | Screw valve/compr. M16 x 45 | 0.095 | 100 | 4 | 4 | 4 | 1424-102 |
| 25Z-6 | Screw valve/compr. M16 x 100 | 0.170 | 125 | 6 | 6 | 6 | 1424-268 |
| 25AC-3 | Counter flange | 65 | 1 | 2344-019 | |||
| 25AC-4 | Counter flange | 100 | 1 | 1 | 1 | 2344-020 | |
| 25AC-6 | Counter flange | 3.600 | 125 | 1 | 1 | 1 | 2344-006 |
| 25AD-3 | Welding nipple dia. 65 | 65 | 1 | 2322-103 | |||
| 25AD-4 | Welding nipple dia. 100 | 100 | 1 | 1 | 1 | 2322-108 | |
| 25AD-6 | Welding nipple dia. 125 | 125 | 1 | 1 | 1 | 2322-110 | |
| 25AF-3 | Threaded plug 3/4" BSP | 65 | 1 | 2314-065 | |||
| 25AF-4 | Threaded plug 3/4" BSP | 100 | 1 | 1 | 1 | 2314-065 | |
| 25AG-3 | Gasket for valve/compr. | 0.016 | 65 | 1 | 2354-105 | ||
| 25AG-4 | Gasket for valve/compr. | 0.020 | 100 | 1 | 1 | 1 | 2354-106 |
| 25AG-6 | Gasket for valve/compr. | 0.040 | 125 | 1 | 1 | 1 | 2354-080 |
| 25AH-3 | Gasket for plug | 0.002 | 65 | 1 | 2356-139 | ||
| 25AH-4 | Gasket for plug | 0.002 | 100 | 1 | 1 | 1 | 2356-139 |
| 25AJ-3 | Screw bonnet/valve M10 x 25 | 65 | 8 | 1424-191 | |||
| 25AJ-4 | Screw bonnet/valve M10 x 25 | 80 | 8 | 1424-191 | |||
| 25AJ-5 | Screw bonnet/valve M20 x 30 | 0.040 | 100 | 8 | 8 | 8 | 1424-215 |
| 25AJ-6 | Screw bonnet/valve M16 x 60 | 0.100 | 125 | 6 | 6 | 6 | 1424-260 |
| 25AK-3 | Screw for counter flange M10 x 40 | 0.030 | 65 | 6 | 1424-194 | ||
| 25AK-4 | Screw for counter flange M12 x 50 | 0.050 | 100 | 6 | 1424-219 | ||
| 25AK-4 | Screw for counter flange M16 x 65 | 0.100 | 125 | 6 | 6 | 6 | 1424-106 |
| Pos. | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Pressure gauges Suction and pressure gauge | ||||||
| 30A-1 | R717 | 1.640 | 1 | 1 | 1 | 1541-108 |
| 30A-2 | R12, R22 and R502 | 1.620 | 1 | 1 | 1 | 1541-232 |
| 30A-3 | R22, R134a and R404A | 1.620 | 1 | 1 | 1 | 1541-074 |
| 30B-1 | Nozzle and gasket dia. 14/0.8 x 1.5 | 0.001 | 1 | 1 | 1 | 3146-013 |
| 30C-1 | Gasket dia. 11/4x1.5 | 0.001 | 1 | 1 | 1 | 2356-119 |
| SMC: discharge pressure gauge | ||||||
| 31A-1 | R717 | 1.380 | 1 | 1 | 1 | 1541-029 |
| 31A-2 | R12, R22 and R502 | 1.400 | 1 | 1 | 1 | 1541-160 |
| 31A-3 | R22, R134a and R404A | 1.400 | 1 | 1 | 1 | 1541-075 |
| 31B-1 | Nozzle and gasket dia. 14/0.8 x 1.5 | 0.001 | 1 | 1 | 1 | 3146-013 |
| TSMC: disarge pressure gauge | ||||||
| 31A-3 | R717 | 1.600 | 1 | 1541-101 | ||
| 31A-4 | R12, R22 and R502 | 1.660 | 1 | 1541-161 | ||
| 31A-5 | R22, R134a and R404A | 1.660 | 1 | 1541-076 | ||
| 31B-1 | Nozzle and gasket dia. 14/0.8 x 1.5 | 0.001 | 2 | 3146-013 | ||
| 31C-1 | Screws for gauges M4 x 20 | 6 | 6 | 6 | 1412-350 | |
| Oil filter | ||||||
| 33-1 | Oil filter complete | 1 | 1 | 1 | 4524-039 | |
| 33A-1 | Filter element | 1 | 1 | 1 | 1517-125 | |
| 33B-1 | Gasket | 2 | 2 | 2 | 2356-202 | |
| 33C-1 | End cover | 1 | 1 | 1 | 3422-150 | |
| 33D-1 | Rod for filter | 1 | 1 | 1 | 2112-145 | |
| 33E-1 | Shield for oil filter | 1 | 1 | 1 | 2158-209 | |
| 33F-1 | Bracket with connection | 1 | 1 | 1 | 3422-152 | |
| 33G-1 | Distance piece | 1 | 1 | 1 | 2212-136 | |
| 33H-1 | Rubber gasket | 1 | 1 | 1 | 1334-012 | |
| 33J-1 | Magnet | 3 | 3 | 3 | 1517-022 | |
| 33K-1 | Iron ring | 3 | 3 | 3 | 2114-038 | |
| 33L-1 | Washer dia. 17/8.4 | 1 | 1 | 1 | 1436-034 | |
| 33M-1 | NuTM8 | 1 | 1 | 1 | 1433-073 | |
| 33N-1 | Washer dia. 24/13 | 1 | 1 | 1 | 1436-036 | |
| 330-1 | Nut M12 | 1 | 1 | 1 | 1433-075 | |
| 33P-1 | O-ring *) | 1 | 1 | 1 | 1331-009 | |
| 33Q-1 | O-ring *) | 1 | 1 | 1 | 1331-008 | |
| 33R-1 | Cutting ring joint | 1 | 1 | 1 | 1349-131 | |
| Suction filter | ||||||
| 34A-1 | Suction filter open, complete | 0.660 | 2 | 2 | 1 | 3425-093 |
| 34A-2 | Suction filter closed, complete | 0.870 | 1 | 3425-095 | ||
| 34B-1 | Filter bag | 0.035 | 2 | 2 | 2 | 3425-096 |
| 34C-1 | Inset for filter bag | 0.040 | 2 | 2 | 2 | 3424-061 |
| 34D-1 | O-ring PRP 346 -104.1 x 5.33 *) | 0.012 | 2 | 2 | 3 | 1331-164 |
| 34E-1 | Coverfor suction filter | 4.160 | 2 | 2 | 1 | 3422-114 |
| 34F-1 | O-ring PRP 248 -120.24 x 3.53 *) | 0.006 | 2 | 2 | 1 | 1331-089 |
| 34G-1 | Hexagon head screw M 16 x 45 | 0.095 | 8 | 8 | 4 | 1424-102 |
| 34H-1 | Spring washer dia. 26.2/16.2 x 3.5 | 0.004 | 8 | 8 | 4 | 1437-027 |
| Discharge pipe for oil filter | ||||||
| 38A-1 | Discharge pipe for oil pump | 0.500 | 1 | 1 | 1 | 3141-110 |
| 38B-1 | Inside pipe connection to control system (compr. without oil cooler) | 0.090 | 1 | 1 | 1 | 3141-162 |
| 38B-2 | Inside pipe connection to control system (compr. with OSSI oil cooler R717) | 0.090 | 1 | 1 | 1 | 3141-163 |
| 28B-3 | inside pipe connection to control system (compr. with HE8 oil cooler HCFC) | 0.090 | 1 | 1 | 1 | 3141-164 |
| 38C-1 | Connection for disarge pipe -SMC112 | 0.120 | 1 | 2333-024 | ||
| 38C-3 | Connection for disarge pipe -SMC116 and TSMC116 | 0.180 | 1 | 1 | 2333-026 | |
| 38D-1 | O-ring PRP 212 - 21.80 x 3.53*) | 0.002 | 2 | 2 | 2 | 1331-020 |
| 38E-1 | O-ring PRP 321 - 29.51 x 5.33*) | 0.004 | 1 | 1 | 1 | 1331-039 |
| 38F-1 | Gasket dia. 27/21 x1.5 | 0.001 | 1 | 1 | 1 | 2356-133 |
| 38G-1 | O-ring dia. 26,58 x 3,5') | 0.002 | 1 | 1 | 1 | 1331-023 |
| 38H-1 | Discharge pipe for oil | 0.140 | 1 | 1 | 1 | 3141-114 |
| 38J-1 | Support for oil pipe | 0.130 | 1 | 1 | 1 | 2213-150 |
| 38K-1 | Hexagon head screw M10 x 16 | 0.012 | 2 | 2 | 2 | 1424-189 |
| 38L-1 | Spring washer dia. 17.2/10.2 x 2.2 | 0.002 | 2 | 2 | 2 | 1437-033 |
| Analogous control and safety | ||||||
| equipment | ||||||
| 39A-1 | Gauge panel | 0.070 | 1 | 1 | 1 | 3146-042 |
| 39B-1 | Socket cap screw M10 x 60 | 0.045 | 2 | 2 | 2 | 1413-382 |
| 39C-1 | Console | 1 | 1 | 1 | 2213-142 | |
| 39D-1 | Bar for controls (4 controls) | 1 | 1 | 1 | 2213-143 | |
| 39D-2 | Bar for controls (5 controls) | 1 | 1 | 1 | 2213-144 | |
| 39D-3 | Bar for controls (6 controls) | 1 | 1 | 1 | 2213-145 | |
| 39D-4 | Bar for controls (7 controls) | 1 | 1 | 1 | 2213-154 | |
| 39D-5 | Bar for controls (US, SMC) | 1 | 1 | 1 | 2213-368 | |
| 39D-6 | Bar for controls (US, TSMC) | 2213-369 | ||||
| 39E-1 | Hexagon head screw M6 x 12 | 2 | 2 | 2 | 1424-150 | |
| 39F-1 | Spring washer dia. 11/6 | 2 | 2 | 2 | 1437-022 | |
| 39G-1 | Socket cap screw M4 x 6 | 1412-200 | ||||
| 39H-1 | Spring washer dia. 7/4 | 1437-020 | ||||
| 39J-1 | Socket cap screw M5 x 10 | 4 | 4 | 4 | 1413-330 | |
| 39K-1 | Spring washer dia. 9/5 | 4 | 4 | 4 | 1437-021 | |
| 39L-1 | Console for gauge panel | 1 | 1 | 1 | 2213-149 | |
| 39M-1 | Nut M10 | 2 | 2 | 2 | 1432-064 | |
| 39N-1 | Spring washer | 2 | 2 | 2 | 1437-033 | |
| Cooling water connection See section: Water cooling of reciprocating compressor | ||||||
| 40A-1 | Set of hoses for cooling water SMC112 | 2.700 | 1 | 3185-157 | ||
| 40A-2 | Set of hoses for cooling water SMC116 | 2.820 | 1 | 1 | 3185-158 | |
| 40B-1 | Hose connection - 3/8" - straight | 0.004 | 28 | 32 | 32 | 2334-025 |
| 40C-1 | Angle - 3/8" | 0.009 | 17 | 17 | 17 | 1341-090 |
| 40D-1 | T-piece | 0.015 | 4 | 4 | 4 | 1341-141 |
| 40E-1 | Hose clamp | 0.015 | 28 | 32 | 32 | 1345-168 |
| 40F-1 | Cable binder | 5 | 5 | 5 | 1554-062 | |
| 40G-1 | Nipple 3/4" - 3/8" | 0.070 | 2 | 2 | 2 | 2312-016 |
| 40H-1 | T-piece 3/4" - 3/4" - 3/8" | 0.150 | 2 | 2 | 2 | 1351-026 |
| Purge valve | ||||||
| 42A-1 | Purge valve | 0.300 | 1 | 1 | 2 | 2412-585 |
| 42B-1 | Threaded nipple | 1 | 1 | 1 | 1349-078 | |
| 42C-1 | Cutting ring | 0.135 | 1 | 1 | 2 | 1349-062 |
| 42D-1 | Nut | |||||
| 42E-1 | Nut | 0.070 | 1 | 1 | 2 | 2313-045 |
| 42F-1 | Connection pipe with collar | 0.025 | 1 | 1 | 2 | 2334-027 |
| 42G-1 | Gasket | 0.001 | 2 | 2 | 4 | 2356-123 |
| 42H-1 | Nut | 0.060 | 1 | 1 | 2 | 2313-027 |
| Pressure and temperature controls Pressure controls for R717 | ||||||
| 45A-1 | KP 5A | 0.300 | 1 | 1 | 1 | 1373-125 |
| 45B-1 | KP 15A | 0.760 | 1 | 1 | 1 | 1373-142 |
| 45C-1 | MP 55A | 1.100 | 1 | 1 | 1 | 1373-162 |
| Pressure controls for R22, R134a and R404A | ||||||
| 45D-1 | KP 5 | 0.300 | 1 | 1 | 1 | 1373-123 |
| 45E-1 | KP 15 | 0.540 | 1 | 1 | 1 | 1373-135 |
| 45F-1 | MP 55 | 1.100 | 1 | 1 | 1 | 1373-159 |
| Temperature controls: | ||||||
| 45G-1 | KP 98 | 0.720 | 1 | 1 | 1 | 1373-043 |
| 45H-1 | KP 77 | 0.350 | 1 | 1 | 1 | 1373-044 |
| 45J-1 | Phail pocket for temperature controls | 0.770 | 1 | 1 | 1 | 1377-171 |
| 45K-1 | Gasket | 1 | 1 | 1 | 2356-133 | |
| AMR 350 S coupling | ||||||
| 48A-4 | Disc pack | 1.132 | 2 | 2 | 2 | 1524-158 |
| 48B-4 | Bolt | 0.054 | 16 | 16 | 16 | 1524-166 |
| 48C-4 | Bevel washer | 0.010 | 4 | 4 | 4 | 1524-188 |
| 48D-4 | Lock nut | 0.018 | 16 | 16 | 16 | 1524-174 |
| 48E-4 | Washer | 0.008 | 16 | 16 | 16 | 1524-182 |
| Intermediate bearing | ||||||
| 49-1 | Intermediate bearing complete | 17.600 | 1 | 1 | 1 | 3113-146 |
| 49A-1 | Housing | 1 | 1 | 1 | ||
| 49B-1 | Socket cap screw M 12 x 45 DIN 912 | 0.052 | 4 | 4 | 4 | 1413-389 |
| 49C-1 | Spring washer dia. 12.2 x 20.2 | 0.002 | 4 | 4 | 4 | 1437-081 |
| 49D-1 | Guide pin dia. 5x26 | 0.002 | 2 | 2 | 2 | 1446-022 |
| 49E-1 | Half section of bearing | 0.080 | 8 | 8 | 8 | 2133-003 |
| 49E-2 | Half section of bearing for repair 0.5 mm undersize | 0.080 | 8 | 8 | 8 | 2133-004 |
| 49F-1 | Hexagon head screw M10 x 65 | 0.045 | 2 | 2 | 2 | 1424-199 |
| 49G-1 | Spring washer M10 | 0.002 | 2 | 2 | 2 | 1437-033 |
| 49H-1 | Threaded plug 3/4" BSP | 0.065 | 2 | 2 | 2 | 2314-027 |
| 49J-1 | Gasket dia. 34/27 x 1.5 | 0.001 | 2 | 2 | 2 | 2356-140 |
| Capacity regulation | ||||||
| 50A-2 | Valve body with 2 solenoid valves without coils | 2.530 | 2 | 1 | 3143-384 | |
| 50A-3 | Vafve body with 3 solenoid valves without coils | 3.440 | 2 | 1 | 3143-385 | |
| 50A-4 | Valve body with 4 solenoid valves without coils | 3.480 | 2 | 3143-386 | ||
| 50B-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 50B-2 | Coil 110V, 50/60 Hz. 10W | 0.260 | 1372-538 | |||
| 50B-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 50C | Solenoid valve | 1372-424 | ||||
| (service kit for one solenoid valve) | ||||||
| Crankcase heater | ||||||
| 57A-1 | Crankcase heater - 270 W -115 V, | 810 | 2 | 2 | 2 | 3181-034 |
| 1 1/4" BSP | ||||||
| 57A-2 | Crankcase heater - 270 W - 230 V, | 810 | 2 | 2 | 2 | 3181-035 |
| 1 1/4" BSP | ||||||
| 57A-3 | Crankcase heater - 270 W - 250 V, | 810 | 2 | 2 | 2 | 3181-036 |
| 1 1/4" BSP | ||||||
| 57B-1 | Sealing ring dia. 42/49 x 6.5 | 0.022 | 2 | 2 | 2 | 1349-213 |
| 80 | Solenoide valve blok, complete with 0.6 mm orifice for oil return, exclu. coil | 2.040 | 1 | 1 | 1 | 1372-179 |
| Strainer kit consider of: | 1 | 1 | 1 | 1372-089 | ||
| 80E | Strainer | |||||
| 80G | Al-gasket | |||||
| Service kit consider of: | 1 | 1 | 1 | 1372-086 | ||
| 80P | Armature tube | |||||
| 80H | Armature | |||||
| 80K | O-ring | |||||
| 80M | O-ring | |||||
| 80L | Al-gasket | |||||
| 80N | Snap fastener | |||||
| Seal kit consider of: | 1 | 1 | 1 | 1372-091 | ||
| 80G | Al-gasket | |||||
| 80K | O-ring | |||||
| 80M | O-ring | |||||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| Orifice kit 0.6 mm consider of: | 1 | 1 | 1 | 1371-034 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 801 | Orifice 0.6 mm | |||||
| Orifice kit 0.8 mm consider of: | 1 | 1 | 1 | 1371-035 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 801 | Orifice 0.8 mm | |||||
| Orifice kit 1.0 mm consider of: | 1 | 1 | 1 | 1371-036 | ||
| 80L | Al-gasket | |||||
| 80Q | AT-gasket | |||||
| 801 | Orifice 1.0 mm | |||||
| Orifice kit 3.3 mm (for thermopump only) consider of: | 1 | 1 | 1 | 1371-037 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 80I | Orifice 3.3 mm | |||||
| 80J-1 | Coil 220/230V, 50/60 Hz. 10 W | 0.285 | 1372-537 | |||
| 80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | |||
| 80J-3 | Coil 240V, 50 Hz, 10W | 0.285 | 1372-539 | |||
| 80J-4 | Coil 24V, 50 Hz, 10W | 0.285 | 1372-541 | |||
| Intermediate pressure connections | ||||||
| 90A-1 | Mixing chamber with flange | 1 | 3114-070 | |||
| 90B-1 | Counter flange for mixing chamber | 1 | 3115-018 | |||
| 90C-1 | Intermediate ring | 1 | 3422-111 | |||
| 90D-1 | O-ring PRP 246 -113.9 x 3.55 *) | 1 | 1331-087 | |||
| 90E-1 | O-ring PRP 248 -120.2 x 3.5 *) | 1 | 1331-089 | |||
| 90F-1 | Hexagon head screw M16 x 50 | 8 | 1424-259 | |||
| 90G-1 | Spring washer dia. 26.2/16.2 x 3.5 | 8 | 1424-027 | |||
| 90H-1 | O-ring dia. 132.9x3.5 | 1 | 1331-093 | |||
| 90J-1 | Cap | 1 | 2312-027 | |||
| 90K-1 | Gasket dia. 18/1 Ox 1.5 | 1 | 2356-123 | |||
| Oil cooling - type HE8 S tor R22 | ||||||
| 92A-1 | Oil cooler | 1 | 1 | 1 | 4242-038 | |
| 92B-1 | Stop valve BMSL 10 | 0.300 | 1 | 1 | 1 | 1374-171 |
| 92C-1 | Thermostatic expansion valve TX 2 - 0.5 | 0.400 | 1 | 1 | 1 | 1371-305 |
| 92D-1 | Solenoid valve without coil | 0.350 | 1 | 1 | 1 | 1372-422 |
| 92N-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 92N-2 | Coil 110V. 50/60 Hz, 10W | 0.260 | 1372-538 | |||
| 92N-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 92E-1 | Filter | 0.320 | 1 | 1 | 1 | 4522-002 |
| 92F-1 | Screwed connection GE 10-LR 1/4" | 0.050 | 6 | 6 | 6 | 1349-051 |
| 92G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1349-089 |
| 92H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 2314-056 |
| 92J-1 | Threaded plug for 8/6 mm pipe | 0.015 | 2 | 2 | 2 | 2314-053 |
| 92K-1 | Gasket dia. 19/14x1,5- aluminium | 0.001 | 8 | 8 | 8 | 2356-124 |
| 92L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 2 | 2 | 2 | 2333-021 |
| 92M-1 | Gasket - dia. 27/21 x 1.5 - aluminium | 0.001 | 3 | 3 | 3 | 2356-133 |
| Oil cooling - type OOSI tor R717 | ||||||
| 93A-1 | Oil cooler | 1 | 1 | 1 | 4242-029 | |
| 93B-1 | Stop valve SN 6 | 1 | 1 | 1 | 2413-010 | |
| 93C-1 | Thermostatic injection TEAT 20-2 | 0.400 | 1 | 1 | 1 | 1371-240 |
| 93D-1 | Solenoid valve without coil | 0.445 | 1 | 1 | 1 | 1372-422 |
| 93N-1 | Coil 220/230V. 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 93N-2 | Coil 110V. 50/60 Hz, 10W | 0.260 | 1372-538 | |||
| 93N-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 93E-1 | Filter | 0.320 | 1 | 1 | 1 | 4522-002 |
| 93F-1 | Screwed connection GE 10-LR 1/4" | 0.050 | 6 | 6 | 6 | 1349-051 |
| 93G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1349-089 |
| 93H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 2314-056 |
| 93J-1 | Threaded plug for dia. 8/6 mm pipe | 0.015 | 4 | 4 | 4 | 2314-053 |
| 93K-1 | Gasket dia. 19/14 x 1,5-alunimium | 0.001 | 8 | 8 | 8 | 2356-124 |
| 93L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 4 | 4 | 4 | 2333-021 |
| 93M-1 | Gasket dia. 27/21 x 1.5 - aluminium | 0.001 | 3 | 3 | 3 | 2356-133 |
| Chain drive for oil pump | ||||||
| Chain drive complete | 3141-127 | |||||
| 96A-1 | Hub for chain wheel (crankshaft) | 1 | 1 | 1 | 2126-020 | |
| 96B-1 | Hub for chain wheel (oil pump) | 1 | 1 | 1 | 2126-019 | |
| 96C-1 | Chain wheel (crankshaft) | 1 | 1 | 1 | 2126-018 | |
| 96D-1 | Chain wheel (oil pump) | 1 | 1 | 1 | 2126-017 | |
| 96E-1 | Chain | 1 | 1 | 1 | 1521-102 | |
| 96F-1 | Hexagon head screw | 5 | 5 | 5 | 1424-150 | |
| 96G-1 | Spring washer | 5 | 5 | 5 | 1437-022 | |
| 96H-1 | Shield for oil | 1 | 1 | 1 | 3141-128 | |
| 98 | Thermo pump | |||||
| 98A-1 | Side cover for thermo pump | 2 | 2 | 2 | 3113-145 | |
| 98B-1 | Monitor box | 2 | 2 | 2 | 1553-215 | |
| Alien screw M4x 16 | 4 | 4 | 4 | 1412-204 | ||
| Spring washer dia.4 | 4 | 4 | 4 | 1437-020 | ||
| 98C-1 | Level indicator | 4 | 4 | 4 | 3185-038 | |
| 98D-1 | Outer part for level indicator | 4 | 4 | 4 | 3185-034 | |
| 98E-1 | Washer dia. 20/13x1.5 | 4 | 4 | 4 | 2356-125 | |
| 98F-1 | Rubber cap | 4 | 4 | 4 | 1554-194 | |
| 98G-1 | Solenoid valve without coil | 1 | 1 | 1 | 1372-422 | |
| 98H-1 | Solenoid valve without coil | 2 | 2 | 2 | 1372-423 | |
| 98J-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 98J-2 | Coil 110V, 50/60 Hz, 10W | 0.260 | 1372-538 | |||
| 98J-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 98K-1 | Check valve | 4 | 4 | 2 | 1364-008 | |
| Straght joint 10 mm BSP | 9 | 10 | 6 | 1349-051 | ||
| Socket 10mm BSP | 8 | 8 | 5 | 1349-101 | ||
| T-joint 10mm | 7 | 9 | 3 | 1349-041 | ||
| Strap for stop valve | 2 | 2 | 1 | 2212-059 | ||
| Cable binder no. 10 | 2 | 2 | 1 | 1554-054 | ||
| Alien screw M4x 12 | 4 | 4 | 2 | 1412-203 | ||
| Nut M4 | 4 | 4 | 2 | 1432-035 | ||
| 98L-1 | Washer dia. 29/21 x 1.5 | 4 | 4 | 2 | 2356-136 | |
| 98M-1 | VA-Joint with nozzle 1.2 mm | 7 | 9 | 3 | 2314-097 | |
| Angle joint | 3 | 6 | 4 | 1349-033 | ||
| Angle swivel joint 8 mm | 5 | 2 | 5 | 1349-087 | ||
| Angle swivel joint 10 mm | 3 | 6 | 2 | 1349-089 | ||
| Bushing 1/4" x 1/2" RG | 1 | 1 | 1 | 2312-013 | ||
| Straight joint 8 mm BSP | 2 | 2 | 1349-050 | |||
| Threaded nipple | 1 | 1 | 1 | 2314-056 | ||
| Threaded nipple | 1 | 1 | 1 | 2314-056 | ||
| Gasket dia. 27/21 x1.5Al | 2 | 2 | 2 | 2356-133 | ||
| Angle joint 10 mm | 1 | 1349-112 | ||||
| Connecting piece 8 mm | 1 | 1 | 2333-021 | |||
| Threaded plug | 1 | 1 | 2314-053 | |||
| Gasket dia. 19/14x1.5 | 2 | 2 | 2356-124 | |||
| Strap | 4 | 4 | 1 | 1377-117 | ||
| Spring washer for M5 | 1 | 1437-021 | ||||
| Allen screw M5x 10 | 1 | 1413-330 | ||||
| Hexagon set screw M6 x 12 | 2 | 2 | 1424-150 | |||
| Nut M6 | 2 | 2 | 1432-061 | |||
| Spring washer for M6 | 4 | 4 | 1437-022 | |||
| Gasket dia. 19/14x4 | 2 | 3 | 3 | 2356-283 | ||
| 98N-1 | Filter | 2 | 2 | 1 | 4522-002 | |
| 98P-1 | Stop valve | 2 | 2 | 1 | 2412-277 | |
| 98Q-1 | Cooling cover | 2 | 2 | 1 | 3113-143 | |
| 98R-1 | Gasket for side cover | 2 | 2 | 1 | 2353-151 | |
| 98S-1 | Hexagon head screw M14 x 80 | 32 | 32 | 16 | 1424-081 | |
| 98T-1 | Oil cooler OSSI | 1 | 1 | 1 | 4242-029 | |
| Socket 1/4" | 1 | 1 | 1 | 1349-101 | ||
| 98V | Solenoid valve without coil | 2 | 2 | 1 | 1372-453 | |
| 98X | PT100 sensor | 2 | 2 | 1 | 1373-253 | |
| 98Y | Stop valve | 2 | 2 | 1 | 2412-277 | |
| 98Z | Non-return valve | 2 | 2 | 1 | 1364-022 | |
| 98AA | Screw joint | 2 | 2 | 1 | 2314-105 | |
| UNISAB | ||||||
| 99A-1 | Support for UNISAB | 1 | 1 | 1 | 2213-500 | |
| 99B-3 | Distance washers | 4 | 4 | 4 | 2212-130 | |
| 99C-1 | Screw for support M 10 x 20 | 2 | 2 | 2 | 1424-190 | |
| 99D-1 | Screw for UNISAB M6 x 20 | 4 | 4 | 4 | 1424-152 | |
| 99E-1 | Washers dia. 22/7 x 1.5 | 4 | 4 | 4 | 1436-025 | |
| Tools set for SMC 104-116 Mk3 & TSMC 108-116 MR3 - type S-L-E | ||||||
| Line no. A600 = Normal set, tools set no 3183-109 | ||||||
| Line no. A601 = Extended set. tools set no 3183-110 | ||||||
| Line no. A602A = Tools for coupling (SMC 104-108) | ||||||
| Line no. A602B = Tools for coupling (SMC 112-116) | ||||||
| Line no. A603 = Tools for alignment of coupling |
| Pos.No | Designation | Dimension | Part No. | Line No. | ||||
| A 600 | A 601 | A 602 | A603 | |||||
| A | B | |||||||
| 1-1 | Clamp with screw, compr. type S and L | 3183-144 | 4 | 4 | ||||
| 1-2 | Clamp with screw, compr. type E | 3183-145 | 4 | 4 | ||||
| 2 | Tools for shaft seal | 3183-139 | 1 | 1 | ||||
| 3 | Tommy screw for cylinder liner | 3183-041 | 2 | 2 | ||||
| 4 | Theaded plug for unloading cylinder | 3/8" BSP | 2314-017 | 2 | 2 | |||
| 5 | Supporting plate for pistons | 3183-115 | 8 | 8 | ||||
| 6 | Spanner for heating cartridge | NV55 | 3183-060 | 1 | 1 | |||
| 7 | Trigger for coupling or belt pulley | 3183-059 | 1 | 1 | ||||
| 8 | Adjusting jig for coupling | 3183-105 | 1 | |||||
| 9-1 | Wrench for cylinder screw | NV 4 | 1 | |||||
| 9-2 | Wrench for cylinder screw | NV 5 | 1 | |||||
| 9-3 | Wrench for cylinder screw | NV 8 | 1 | |||||
| 9-4 | Wrench for cylinder screw | NV10 | 1 | |||||
| 9-5 | Special wrench for shaft seal | NV 4 | 1612-392 | 1 | 1 | |||
| 10-1 | Retaining-ring plier | J21/G | 1 | |||||
| 10-2 | Retaining-ring plier | A11/G | 1 | |||||
| 11-1 | Open end and ring spanner | NV10 | 1 | |||||
| 11-2 | Open end and ring spanner | NV17 | 1 | |||||
| 11-3 | Open end and ring spanner | NV19 | 1 | |||||
| 11-4 | Open end and ring spanner | NV22 | 1 | |||||
| 11-5 | Open end and ring spanner | NV24 | 1 | |||||
| 11-6 | Open end and ring spanner | NV27 | 1 | |||||
| 13-1 | Socket wrench | NV10 | 1 | |||||
| 13-2 | Socket wrench | NV13 | 1 | |||||
| 13-3 | Socket wrench | NV17 | 1 | |||||
| 13-4 | Socket wrench | NV19 | 1 | |||||
| 13-5 | Socket wrench | NV22 | 1 | |||||
| 13-6 | Socket wrench | NV24 | 1 | 1 | 1 | |||
| 13-7 | Socket wrench | NV27 | 1 | |||||
| 13-8 | Socket wrench | NV30 | 1 | |||||
| 13-9 | Socket wrench | NV32 | 1 | |||||
| 13-10 | Socket wrench | NV9/16" | 1 | |||||
| 13-11 | Socket wrench | NV 3/4" | 1 | 1 | ||||
| 13-12 | Socket wrench | NV11/16" | 1 | 1 | ||||
| 14 | Ratchet handle | 1 | ||||||
| 15 | Speed handle | 1 | ||||||
| 16 | Universal joint for socket wrench | 1 | ||||||
| 17-1 | Extension rod for socket wrench | 1 | ||||||
| 17-2 | Extension rod for socket wrench | 1 | ||||||
| 19-1 | Torque wrench 15-90 Nm | 1 | ||||||
| 19-2 | Torque wrench 40-200 Nm | 1 | 1 | 1 | ||||
| 20 | Coupler for torque wrench 1/2 | 2 | 1 | 1 | ||||
| 21-1 | Open spanner for torque wrench | NV11/16" | 1 | 1 | ||||
| 21-2 | Open spanner for torque wrench | NV 3/4" | 1 | 1 | ||||
| 22 | Feeler gauge | 1 | ||||||
Sabroe screw compressors
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 110 SAB 120 SAB 128
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283
VMY 336 VMY 347 VMY 436
VMY 447 VMY 536
Sabroe piston compressors
Sabroe SMC 104 Sabroe SMC 106 Sabroe SMC 108 Sabroe SMC 112 Sabroe SMC 116
Sabroe TSMC 108 Sabroe TSMC 116
Spare parts catalogs for Sabroe screw compressors:
SAB 81 SAB 83 SAB 85 SAB 87 SAB 89
SAB 151 SAB 157 SAB 163 SAB 193
SAB 202 SAB 233 SAB 283